(1pc) Matek Micro BEC 6-60V to 5V/9V/12V Adjustable Step-Down Voltage Regulator for 5/6/7 inch 210mm 250mm up to 12s Carbon Fiber FPV Racing Quad Frame X Quadcopter Like Martian II 220 QAV250

These are really nice BEC's they are tiny and of high quality. I used these to step down battery voltage to power my flight controller as the 4 in 1 ESC that I used for my drone build did not have any 5v bec built into it. This is working perfectly for that use. As always Matek Sys products are of high quality and last a long time.

these are very small but work very nice to step down voltage , using to power caddx vista on a 6s quad, getting power from main vbat step down to 9,1 volts. I like how the three chips are still attached and the matek sealed bag .

These adjustable regulators are perfect for powering all sorts of low-voltage devices, not just model aircraft parts. They're great for powering small devices like single-board computers from a wide range of DC inputs.

You found them! These are the perfect tiny 5V BEC. I tried a bunch of different tiny 5V BECs. They all work fine but these are the tiniest. Will comment here if I find smaller ones. In the meantime, these are it!

Got these to run my Air Units off of 6s, they work perfectly!

Castellated edges and a second GND pin instead of a nearly useless enable pad. Appears to hit 5v right on the nose too.I think 3.3v/5v switchable would be more generically useful than having 9v, but it seems these are targeted towards idiots with overpowered VTXs so I can't really blame Matek.

tiny.These are super stable and don't get hot at12V in 5V outCrazy fast shipping during pandemic. Thank you Boulder RC!

Excellent little Vreg. Low ripple and provides enough amperage you keep circuitry / logic boards running fine. Probably not enough to drive full sized servos not charge any USB device, so don’t try.

Got these for my DJI OG Air Unit since it needs 5V power supply. It was easy to install and works as expected.

😋😋😋