Has anyone used it to do a complete transmission flush,and if so how?

The idea of using Mityvac is to avoid mess. Yes I used it for complete flush, replaced 3.8 qt of fluid four times within 100 miles, fluid is bright pink even after 800 miles and not a single drop on the floor. Have patience, this thing will do the trick. Alternatively you can disconnect fluid outgoing line to trans, start the car wait for 1/4 of your tranny fluid to be collected, stop the car, replace the fluid with new, repeat 4 times and you are done, but there may be spills and you don't require a MityVac, it just does your job easy and clean. Pick your choice.

Can this be used for brake fluid?

If ypu want to use for brake fluid and coolant buy 7075x01 gasket or buy a send extractor CTA 7073, that pump comes with the anti corrosive seals on them and is only like $3 more then the pumps with oil seals on them. You can do brake fluid with this but you'd need to wash it out within 10 mins of have brake fluid inside, eventually the gasket will let air into pump and you'll get the drips when extracting fluids. I'd just use this to do it and buy the 7075x01 seals to change them to when this starts dripping eventually. You'll need to change them out eventually anyway, even if you only do oil extraction.

what all you guys use to clean the inside of the tank so will not contaminate the clean fluid for dispensing

I've used mine to pump out hydraulic /transmission oil. I clean the tank by running a pint or so of gasoline through it prior to putting the clean oil in it. This has worked fine.

Yes it will damage the evacuator reservoir and turn the fittings gummy over time. We had two separate evacuators at my shop- one for oil and the old one my boss destroyed was only to be used for gas. It basically collapsed the tank. It didn’t leak, but looked horrible and it still worked fine. Also, I did not get blown up. Any mechanic will tell you, a customers fuel pump never goes out with a 1/4 tank of gas in the car. Usually, its full or 3/4 of the way full. 20-30 gallons in the tank makes removing the tank a little difficult without sucking some gas out first. Advice: buy two, or immediately transfer gas to a proper storage container and clean out the evacuator and fittings.

Desertcart Logo

Join PRO & Unlock Exclusive Perks!

قم بتنزيل التطبيق

نحن مصدر العناصر من

الإمارات
UK
الهند
USA
اليابان

خدمات العملاء

معلومات عنا

دعم العملاء

علاماتنا التجارية الأخرى:Hewyn|Selfship

المراجعات

M**A

Recommended

Do he's job.

13.03.2024

B**E

instructions to use missing

5.03.2022

B**B

Used this tool a few times already to service a power transfer unit and rear differential. My vehicle does not have drain plugs for these gear boxes (only fill plugs) and the manufacturer claims the fluid inside is filled for life. There are many documented cases of mechanical failure due to lack of maintenance with this particular set up so i decided to purchase a fluid evacuator to facilitate some sort of maintenance. This one was not the cheapest one available but i figure i have already covered the cost with the number of jobs i have done with it. I do have the luxury of being able to hook up to shop air so i have been quite satisfied with its performance.

13.11.2019

B**.

Great product . I returned the first one because of a problem , it was easy to return , and the refund was fast. I ordered another one and it literally came the next day after the one I returned. The Mityvac works fantastic and makes decanting automotive fluids , such as diff oil , and trans oil , like the newer 8-9 speeds , which are filled at the bottom @ the trans pan , effortless and so easy with the brass shut off valve , precise filling is very easy .

27.02.2024

B**T

Mityvac are the best in pump of all kind, work's super.

29.07.2021

R**E

Used on a 2008 E60 BMW GA6HP19Z transmission to fill the transmission fluid, used the BMW adapter which worked great. All of the adapters are quick release like a compressor hose, no leaks!! Worked great, able to fill the transmission quickly. I was working on Jack stands, only had about 13 inches of clearance. The hose was long enough that the canister was beside the car, and the hose reached the transmission no problem with at least a foot to spare in length, also had my code reader next to the canister during final fill so I could monitor transmission temperature during final fill. Having the cutoff valve was a huge help when I needed to add more transmission fluid to the MityVac. Just stop filling, release pressure, open top, refill, pump up pressure again and resume filling. No spills. Filling the transmission was the easiest part of the job using the MityVac, and no I did not receive any compensation/freebies for this review.

4.12.2020

ASIN	B0002SR7TC
Best Sellers Rank	#83,739 in Automotive ( See Top 100 in Automotive ) #89 in Automotive Fluid Extractors
Brand	Mityvac
Customer Reviews	4.6 4.6 out of 5 stars (6,351)
Date First Available	1 January 2024
Item Weight	5.28 Kilograms
Item model number	7201
Manufacturer	Mityvac
Manufacturer Part Number	MV7201
Model	MV7201
Product Dimensions	23.62 x 33.53 x 64.52 cm; 5.28 kg
Special Features	Bi-functional (extract and dispense)

Mityvac 7201 Manual Fluid Evacuator Plus with 2.3 Gallon Reservoir; Evacuates or Dispenses Fluids with Push Button; Evacuate Through The Dipstick Tube, White

التفاصيل

الوصف

المواصفات

المراجعات

الأسئلة الشائعة