6-Pin to Cut-End Connector

After watching complicated ways to install under cabinet lighting using Philips Hue Lightstrip that involved ethernet cable and soldering, I wanted a simple method that would not be so challenging. These parts worked perfectly, no problem at all, with my v4 Lightstrip (Bluetooth). Everything installed without a hitch first time. there is polarity to the Lightstrip system (B-->A) so my advice is to plan the connections, cut strips to length and connect them with the various connectors end-to-end for the whole system to any wall plug (where you can get at everything easily and check it). Confirm that the plan and all the parts work. If everything works well, then run the wires through the various holes knowing that it all works.

Simple to use and is sturdy and well made. The pins can be removed to allow it be used as a female end which is very helpful and increases the flexibility in how/where you use it. It's bit expensive though.

I needed a way to attach my Philips Hue Lightstrip v4 to the back of an IKEA pegboard. I had to cut the strips and then connect them using these clips and everything worked perfectly.

Tell me how this clip can accurately connect one time to a light strip. Let alone the dozen of times you'd need to do for a larger installation. After many tries, the connection is wobbly at best. If it did actually make a connection, the extended strip would be off-color or worse, make the base strip flicker. On one attempt it caused a short and ruined a light strip. How anyone can actually present this as a usable product is beyond me. Do they actual TRY this item.

Litcessory only has instructions/tutorials for the V3, but nothing for the V4. With the V3 you have to remove part of the plastic and use a special tool to bend the metal pins on the connector before inserting it. If you try to do this on the V4 connector, the connection will be loose and may not work. I unfortunately wasted a 2' section of a hue strip because of this. Turns out with the V4 the process is very simple, all you do is cut the strip on the cut line. Do not remove any of the plastic. The cut strip inserts snugly into the connector and holds well once closed. I would give this product 5 stars if there were instructions and I hadn't wasted a portion of the hue strip trying to figure it out. The process is so much simpler with the V4, Litcessory why don't you have any instructions for the V4??

Not much competition in this space for Phillips Hue LED strips, so they are charging a premium for what you get. Works well, really easy to use. In my case it was worth the money.

Took less than 5 minutes to install the cut end adapter onto the Hue lightstrip and get it working. I think you can avoid an unreliable connection by making sure the raised part of the adapter connections are aligned properly with the lightstrip contacts. I did it by cutting the lightstrip to the left of the scissors line, as shown in the photo. I also left the backing tape on the lightstrip to increase the contact pressure when the adapter is clamped down. There should be no need to bend any pins or tweak the cable.

Worked like a charm. Great product .

Facile. Utiliser, compatible avec les rubans Hue V4

The product is excellent. I connected it up in a few seconds. Just cut at the scissor line on the light strip and push into the box. Previously I soldered them but it's such a pain, and I had some reliability issues. Just wish they were half the price, or in smaller sets

Se adapta fácilmente a la tira, requiere de cinta doble cara aparte para poder pegarla bien. Es un poco grande el adaptador, hasta un poco más tosco que el original que viene con la tira para unir cut-Cut.

Used to patch philips hue led strips

Ich habe die Adapter zusammen mit einem 1 m Verlängerungskabel gekauft. Alles ganz einfach, Lightstrip auseinander schneiden, Adapter reinschieben und mit dem Verlängerungskabel verbinden. Ein gutes Produkt aber etwas teuer, da man für beides Zusammen fast 40 Euro hinblättert.