AtdecVF-AT-D Dual Display Desk Mount (up to 27″ and 17.6lbs displays) with two mounting options, Brushed Aluminum

If you're looking for a great looking stand this is it. Polished features make it look modern and expensive. Instructions were clear and easy to follow. I've mounted two 22" Hanns-g LCD's on it and it's been in use for over 3 months. No problems. I mounted mine by drilling through the desk which looks very finished, I did end up using a very large washer underneath the desk (not included) because I was concerned about the weight of the monitors. Did require a lot of strength to tighten the lift portion so they don't slide down, but once I had it in place it hasn't moved. Looks great and no problems.

I'm using this stand with a pair of 21" monitors. I have it bolted through a particle board desk, and it's stable using only the provided washer on the bolt. There's no perceptible bouncing during normal use. The position of the monitors is easy to adjust, and even the tilt can be adjusted without the allen wrench once the joint is adjusted properly.I have removed one of the monitors while traveling, and while the other monitor did tilt noticeably even when adjusted toward the post, it didn't damage anything when left that way for a month.

I put 2 27" monitors on it without trouble and it is very sturdy. However, I don't think that monitors larger than 27" would fit. I've seen some reviews which states that the brackets were too small to attach to their monitor. This is because they didn't ready the installation guide. The bracket is designed to fit both VESA-70(70mm center-to-center distance between screws) and VESA-100(100mm center-to-center distance between screws) compliant monitors. When you unbox the stand, the brackets will be in VESA-70 configuration. If you have a VESA-100 monitor then just pull on the ends of the bracket and they will slide out farther to match your monitor.There are two ways to mount this to your desk. First, a very heavy duty bracket is included for attaching this to your desk without drilling a hole. Second, there is also hardware included for drilling a hole through your desk and bolting directly through the desk. I opted for the second option. Once attached, it is very sturdy and I'm pretty sure I could pick up the desk with it if I tried. With that said, just looking at the clamping bracket, I'm confident that it would be equally sturdy.The overall quality of the stand is outstanding and I was impressed both with the thought that had been put into wire management and with the socket on the top of the pole which allows you to store the allen(hex key) until the next time you need it. I don't know about the rest of you, but I'm prone to losing these things so it's really nice to know where it's going to be the next time I need it.I've used cheaper stands in the past and really wish I had bought this stand sooner. You cannot beat the value of this stand at this price.

I would have given it a 5, but with the weight of two light 22" monitors, this unit tends to lean forward when using the clamp mounting option. Once I get my new studio set up, it will be using the bolt through set up, so hopefully I won't need the wire across the top of the pole secured to the hutch to keep it from leaning forward after that. Looks great, monitors do not droop, these keep them right where you have positioned them.

First off, I hardly ever write reviews, so I have to really like it or hate it to write one. Fortunatley, I really like this one. It's such a good product for a great price. The installation was very easy. Once installed, the monitors feel very securely attached. I am moving them constantly b/c I have a lot of meetings in my office. Also the movement of the arms are very smooth.I also like the aesthetics of the product. I'm new at work, and everyone who walks into my office comments on who cool and clean it looks. It also removes clutter from my desk. My desk tends to get cluttered, so the less clutter the better. The only negative is that I wish it could be designed for the cables to go down the arm shaft and under the desk. That would give it a totally clean look. That's on the wish list, because I couldn't find any product that did that.

I mounted two Dell 24 inch monitors on this LCD Mount. I did the through the desk installation and even put a large steel plate on the underside for extra strength. It looks awesome! But I find it very annoying that the monitors bounce up and down with slight movements of my body as I work at my desk. The weight of each monitor without the stand is 15.48lbs, which is under the maximum weight limit of 17.5lbs per arm. If I had the money in hand to buy another dual monitor stand, I'd choose a different brand or model.

Bottom line; very satisfied with the quality, simple install, and functionality. Great value compared to anything similar in this price range.Quality construction and materials, installation is as simple as possible and the mount functions very well. The design is smart yet sumple, allowing for minor adjustments so that the monitors can be set just as desired. Plus they have incorporated the allen wrench tool into the unit (inconspicuous) allowing for easy adjustments, tweaks, or removal in the future without having to hunt down the necessary tool.Any critical feedback is probably related to my individual installation; I would like the option to run the wires through the base plate with the surface mount installation, verses through a separate wiring grommet. However, that said, the base plate is extremely minimal which I really like, especially when compared to other designs.

This dual monitor mount is the second one 1 bought since they are great unit. Other one is hold up well after 3 years. Excellent finish, multiple set up options. Cable management is good, but there are better options if you want completely no-show cabling.