Circular Saw Blade, 6 1/2 Inch, 90 Tooth, Vinyl Cutting (DW9153)

This is a 5 3/8", 10mm arbor, 80 tooth, clockwise cutting circular saw blade for finishing work. I used it on a Milwaukee M12 Fuel cordless circular saw it to cut wood wall panels and 1/2" thick baseboard trim. The blade cuts very smoothly and very cleanly. There aren't many blades to choose from at this size. I am happy with my purchase and would recommend it.

Gets the job done for vinyl siding. Decided to turn the blade backwards per recommendations.

Worked when cutting vertically through plastic window shutters as long as I taped both sides of shutters where cut was made to avoid shattering blades . Be careful to feed slowly 😉

Cant really give a review on them as i bought these as spares but they are good quality. Should work as good as my old blade does when its time to use them.

Purchased these blades for a vinyl siding project. Made a jig for the saw and the cuts were good with no breakout as long as it was a slow stroke.

Good blade. Fit well & cut paneling smoothly.

Good

I used the blade to cut thin plastic corrugated panels used for a greenhouse roof; I was pleased the blade did not splinter the plastic but made a smooth cut across the panels. I did put blue masking tape on the panel both to mark the cutting line and to limit flying debris. I did the cut with a low speed 20-volt small circular saw.

Me ha servido muy bien

Si buscas para melaminado, está NO ES LA OPCIÓN! DESPOSTILLA y no la recomiendo para ese propósito

This saw blade is so hard to find in store thanks to amazon, we can have 6 ½ inch paneling and vinyl saw blade. I used this blade to cut pvc roofing sheet and with the right angle and the right speed you can these sheets without much issues. But keep in mind plastic/pvc/polycarbonate sheets are hard to cut in general it’s not like wood (that’s why most retailer store will not even cut these sheets). As far as durability goes, this product should last long enough for you to make a few projects. I will update my review if the situation change but that will probably not happen. Overall great product, fast shipping, low price and work very well. Cette lame de scie est si difficile à trouver en magasin grâce à Amazon, nous pouvons avoir une 6 ½ en plus. J’ai utilisé cette lame pour couper des feuilles de toiture en PVC et avec le bon angle et la bonne vitesse, vous pouvez couper ces feuilles sans trop de problèmes . Mais gardez à l'esprit que les feuilles en plastique / polycarbonate/pvc sont difficiles à couper en général (c’est pourquoi la plupart des détaillants ne veulent même pas couper ces feuilles) . Pour ce qui est de la durabilité, la lame devrait être en mesure d’exécuter quelques projets. Je mettrai à jour ma critique si la situation change, mais cela est peu probable. Globalement très bon produit, livraison rapide , un prix bas et la lame fonctionne très bien .

Très content du service merci

Good price, fast delivery