AVERZELLA 2 Pack PWM Fan Hub Splitter 1 to 5 Splitter 5 Way PC Case Internal Motherboard Fan Power Extension Cable Cord Wire for ATX Computer Case 4-Pin and 3-Pin Cooling Fans (16 inch, Black)

The media could not be loaded.  I wasn't really wanting to buy these as I only needed a 1-4 hub, but couldn't find any in this style. I didn't want an extension splitter, so I had to pick up these 1-5 hubs. They are different than most that I have purchased in the past as these don't have the wire header soldered on, it too is a extension cable that you have to plug in which is nice because the soldered ones seem to break easily and leave you needing to buy new ones.The only disappointment that I had, the cables included aren't long enough to route where I needed them. Most people don't run a super tower case so I'm sure they would fit most applications. But even then, 2 out of my four hubs still needed another extension and it's not that far from the motherboard header. I would recommend they at least add another 3-4" and make it a little more flexible. Stiff cables are a pain.Positive side. I was using 10 port sata powered hubs that also received pwm signal from the motherboard as I have push pull on most of the radiators in the my system and I couldn't get those to adjust well for keeping the fans quiet. I switched to these to help reduce noise as well as clean up the basement of my chassis as I really needed it to be cleaner than what the sata powered hubs left me with. I ended up being able to remove 9 fan extension cables, 2 10 port sata powered hubs, and a psu to 4 sata cable from the basement of my chassis and it looks so much cleaner as I have a see through midplate and couldn't really have a gangle of wires down there cluttering it up.

Needed for new PC/Case/Fans - nice price

Works well easy to use

I needed more places to power case fans in my new PC build (not enough on motherboard) - and this was the perfect solution. I only rated "Value for money" as 4-stars because I would have preferred to buy just one rather than a 2-pack but that's a minor issue. This product was the cheapest and simplest solution for me. I installed it in minutes and it's working perfectly. Highly recommend you consider it if you're having a similar need...

Needed a extra fan header to connect my extra fans and this is plug and play and works excellent. I can control each fan individually as well

Exactly what I needed. Quality very good

First off the domt fangle and hang lose...u can tape them on the back were wires go it comes wid it...simple solid build this should be way more at this price plz buy it esp for watercoolers aio or self build cuz that what i bought them for

Solid product but kills the rpm reading witch is why i bought them was to try to keep my controller in check, they all just run at the same speed with no seperation