PopSockets: PopGrip Slide Stretch Non-Adhesive Phone Stand & Grip with Square Edges and a Swappable Top - Compatible with Most Phones - Clear on White

Bought the curved one and it fits on my Pixel 6 Pro without a case, and seems to hold it securely enough though it does slide easily. It also fits on a bellroy leather case very snug and doesn't slide without quite a deliberate push. Using this in one hand is easy. When Popsocket is flattened and the phone placed on its back the top of the phone (camera bar) will touch the table because the volume buttons mean the Popsocket can only sit lower down the phone. The Popsocket doesnt really let the phone stand vertically very easily when in normal position but as a horizontal stand it is always good. Would recommend if your phone is too big for your hand to hold!

I love popsockets, but I can't always stick them to my case. They can be a bit of a pain if it's a silicone case...they won't stick, and if the base is stuck in place, the entire case must be removed to wirelessly charge. This grip is ideal. It can be removed very easily and swapped between devices within seconds. The only issue I've had sadly is due to my phone. The volume rocker on the pixel 7 pro is quite low, therefore the grip has to be positioned at the bottom third of the screen. This is a little low for comfort and when using it as a stand in landscape mode, the phone sits at an angle. On the whole though, it's very useful and I like it a lot.

Absolutely love this holder. I always hated how difficult it was to know exactly where to put the sticky pop sockets, and then they are in the wrong place when I want to use the camera or watch a video in landscape. This changes everything! Really easy to move it up and down, the springs are very sturdy and there's no way it's falling off. I've never had an interchangeable top on my pop sockets before, that's a great feature so I can change the look if I want to. As with other pop sockets, I find the actual size of the finger grip to be a bit too large to be perfectly comfortable, I could do with my fingers being slightly closer together. But it's a really minor point. Also, my new pixel 6pro has the volume buttons bang in the centre of the phone side so there's a limit on how high up I can place the grip. But it hasn't been a problem so far. I'm using a spigen phone case and even with the curved edge of my screen, the pop grip doesn't interfere with the screen function at all. I still begrudge paying more for the grip then the actual case cost, but it's innovative so I guess it's worth it.

Really pleased with this! This is exactly what I wanted a pop socket that can come on and off of any case! It’s genius and I love it. Also the fact I can change the tops is brilliant and I get bored really easily so it’s perfect for me. My only gripe is that it is so tight I can’t slide it up or down (but no worries of it ever falling off so good) it needs to be taken off fully and re-put into the place I want hence the 4 star’s otherwise it’d get 5! But I have bought it also for my son and fiancé cos it’s just a great cheap gift for xmas. Really pleased with it. I do think for almost £15 it’s too much but bought black for the boys £10-10.99 so not bad. Would defo recommend best popper ever! Very happy

The best for small hands with big phones. I have had mine for over a year and a half for my iphone 14 pro max and it is amazing. I love how adjustable it is. As a girl I just love changing my covers so this is so perfect since popsockets are expensive to keep purchasing and phone cases get dirty so easily. These ones specifically come with adjust, stretchable loops so it can fit over any phone cover. I had to order this for my sister in law too as she got a new bigger phone. Although the design has faded on my old on (which does not bother me) , the outer 6white has not stained AT ALL which is amazing especially in the kitchen with dirty fingers! Just marked up a little from dropping it.

Pixel 6 phone users might be interested to know this. Without the case, it sits fine. With a case you will see gaps between the phone and the clamps, which is not aesthetically pleasing. Other than that, it does what it's supposed to do, which is help prop up your phone. Portrait or landscape. Keep in mind that landscape mode might leave your phone a bit tilted cause of the clamp. Wireless charging also works. But have to twist the disc counter clockwise to remove it then place the phone on the wireless charging pad.

I love my pop socket, I have a Samsung galaxy s23 ultra and the phone is too big to hold without a pop socket. However, because i have a silicone case a sticky pop socket wont stick to the back, but this one with sliders can stretch to the edges of my phone and holds it securely. When you dont need it it just pushes back in without a problem

I’ve been using the adhesive pop sockets for years now and have become dependent on them because of how comfortable and easy it is to hold my phone with one on. However, I was getting sick of therefore needing to keep the same phone case, or the pop socket adhesive getting old and the pop socket falling off. This is the perfect solution to my problem. Whilst, admittedly, it doesn’t look as nice as the original pop socket (purely because of the extra bulk it adds to the phone), it is super practical. I love that I can adjust the position both up and down and left and right to where is most comfortable for me. Hopefully I won’t have to buy another one of these for a long time as I can so easily remove this and put it on a new phone case.

Only thing I don't like is the price considering the fact that it doesn't take much rough handling to fall apart. Me, I'm crafty. Dad's a Tech Mechanic, Mom's an Artist so when it popped apart the first time it was easy for ME to figure out how to put it back together. But if you're not mechanically inclined, you may not have the same experience I did. lol. But in terms of convenience and functionality, I love it! It's extremely helpful to be able to move where the pop socket is or just remove it entirely if need be for use with ringlights, tripods, and other phone mounts, etc. So, so far, I dig it! I can just see it having a short lifespan if you don't use it carefully when moving/ removing it! 🤗 #✌️❤️🤝👊 @ani_r_u.0akley *UPDATE 08/30/24* Sturdier than expected! Has held up well! The plastic of the pop socket itself gets grimy and browned pretty quick but if you want you can put different pop sockets on it so eventually that's what I'll probably do. Overall a great item so far though!

Love this pop socket as you can use it on any type of phone and reuse it on a different case. It’s a little expensive considering the size, but, inflation. So, can’t help that I guess. Also, the packaging it came in was super large for the size of the product meaning there is more waste. Definitely could have been sent in a smaller package.

Works great

iPhone15のMAXで使ってます。 歴代iPhoneはプラスとかMAXとかでかいサイズで片手でめっちゃ使いにくいので毎回ポップソケット使ってます。 最初はバッタモンのポップソケット使ってたんですが、貼り付けが3Mの両面テープで一回付けると剥がせずそのままケース変えるたびにめんどくさかったので、今回はこちらを購入しました。 取り外せるしアジャストできるからどんなサイズにも使えて便利です。 ソケットのところが取り外しできて他のと交換できるってどこがのレビューで見たので、試したいと思いながらまだ試せてないので今度やってみたいです。

Har haft den på en Galaxy S21 Ultra ihop med ett Spigen Liquid Air Case. Sitter helt okej, kan lossna ibland. Gummibanden som håller ihop den gick sönder efter 3 veckor tyvärr. Går enkelt att åtgärda med o-ringar som finns att köpa i vilken järnhandel som helst.