Mini Fridge Thermostat, Universal WPF-20 Freezer Thermostat Controller 2pin / Compatible with wpf16 and wpf18【Can Provide Installation Tutorial】

It did not have an "off" position that I could tell, the thermostat lead was twice the length I needed. All that's probably on me.

Thermostat works very well. The old one had smaller spade terminals and mounting holes a bit further apart than the new one, both both issues were easily corrected. Recommended.

Easy to install and is working great! The original part for the fridge is no longer available. This part works as a direct replacement. Much less expensive than replacing the fridge.

Works well, easy install. Stock Kenmore knob doesn't fit well on thermostat (can't push it all the way in), maybe they should ship a knob? Knob indicator also seems off by about 270 degrees. The important things are it works, solved my problem and is a great price. Would buy again!

As described, fixed my mini fridge, working great

It fit my refer is fixed.

Works great for my mini fridge. I did have to do adjustments to the right screw on the thermostat like 3 full turns to get it not to freeze on dial Number 3 . Also the dial set up is upside down compared to my original. I had to flip it as stated before by 1 reviewer . No biggie. But its working great in My Fireball Whiskey glass door Display mini fridge.

Thermostat is defective and incorrectly manufactured. Arrival inspection noted the capillary tube was heavily coated in very sticky residue, a potential source of failure due to metal corrosion in a condensate environment of a refrigerator (capillaries should be completely clean of all solder fluxes and residues). I trialed the control knob and it would not fit! This will interfere with closing the refrigerator door. The identical problem was found via another seller's returned product, which this was the "replacement". I repeated the exercise of measuring the retainer prongs for the knob. OEM WP2198202, 0.032" -22GA Chromated 3ART5VW14, 0.039" -20GA Zinc Plated narrow prong 0.251" 0.271" X No-Fit wide prong 0.380" 0.383" OK shaft dia. 0.250" 0.250" OK HouseUP (barcode:X0038WT61R) OEM control knob has two free-fit grooves, a 0.253" and a 0.383" for the retainer prongs. One prong is incorrectly made compared to the OEM part for the respective knob mating surface. The small prong is excessively wide (an impossible fit), however the larger prong is nominal. Note the knob retainer is made of a thicker metal gauge; less give, requiring more potential force. The shaft also has lateral play and springiness because a very important wave/thrust washer is missing from underneath the knob retention stamping. This defect allows free movement of the shaft inward towards the main-spring assembly and sideways, which can affect calibration just by the force of inserting the control knob during installation or dynamic use. There should be no free movement other than rotation! These problems are IDENTICAL to the alternate SKU purchased. In fact the construction and stamped sub-component are the same in profile, measurements and draw marks (a metal stamping's fingerprint). I selected this product because a description photo showed that the underlying washer was part of the construction. However, this thermostat is missing the vital component for proper and reliable function found on both OEM and quality generic replacements. The product is defective, of improper fit/function, and of deficient manufacture. Takeaway: It's apparent that Amazon is stocking the same part constructed by the same manufacturer with different sellers under multiple SKU markings in an identical box (re-badges), but different capillary sleeves. The only difference found was this had a clear vinyl tube sleeve over the capillary, and the other had an opaque-white sleeve of unidentifiable material. The sleeve differences exemplified in their respective product photos, however the products' construction do not match the photos.

Works great! My Danby chest freezer model is: DCF500W. The factory thermostat is: Wpf 31R-102 which I can find nowhere. This part replaced it perfectly.

Fonctionne très bien sur mon congelateur. Quand j'ai installé la sonde du thermostat au premier coup j'avais seulement-12°C mais j'avais entré la sonde trop profond dans la gaine. Après l'avoir retiré il reste entre -22°c et -19c° température idéal

Good product

This item works with my compact Kenmore Refrigerator model # 461.90182 and was easy to install. Original thermostat is no longer available.

Solution a un problème. Peu coûteux. Facile a installer,Au lieu de changer frigo