CRC Disc Brake Quiet - 4 Fl Oz. (05016)

As advertised, I've still heard no brake noise long after install.

I've been using this lubricant for years! Its worked great since day one!

I bought this bottle to ensure that the brakes on my car would not squeak or rattle after replacing pads and rotors. Its cheap and easy to apply, and the CRC products I've used before seem to be high-quality at a reasonable price. In order to use the product, you should be wearing disposable gloves. The stuff is bright red, its messy, and it sticks to everything. All you have to do is apply a liberal amount to the back side (the part that is NOT touching the brake disc) of all of your brake pads before you install them, then put them in as usual, and put everything back together. If you still get squeaking after putting these in, you either missed one, or there is something else wrong with your brake system. However, sometimes the brakes make some noises when they are getting "broken in." So just because you hear something doesn't mean there is absolutely something wrong. As long as the brakes are pulling hard, and stopping safely, give it a few days of driving for the new pads to seat on the rotors before troubleshooting any noises for new brake pads. Only reason I am not giving this product 4-5 stars, is the packaging did not stand up to shipping. When I opened the box, the little red cap had come off, and about 1/3 of the bottle had squeezed out, all over the other items in the box. It was a big mess, and as mentioned previously, this stuff is almost impossible to completely get off once it sticks. Luckily it was just plastic and cardboard packaging that was ruined, but it could have been worse. Not to mention I lost 1/3 of the volume from the bottle. So that is at least one less bake job I can do before I need to order more. I'm not sure if its CRC not sealing the bottle well enough, or if Amazon being careless in the shipping, but somehow the combination of this bottle being shipped loosely in a cardboard box ended badly for me. Your experience may vary. If possible, try to buy this product in individually-wrapped packets, instead of a bulk bottle like this. That would avoid the problem I ran into.

I got sick of getting dimed to death buying the buck fify packets at the auto store. I had to be chincy with the small packets. I would end up buying a packet for each wheel that ended up being 7 bucks. To milk me out of money, the store conveniently no longer carries the tubes of brake grease, only the small packets. This stuff is great. I can slobber on and feel confident I have enough on. I have forgotten to buy the brake grease when buying pads and end up needing to go back. We have 2 cars and happy I bought this. The last pad change out, I forgot to buy packets and put the rears on with high temp silicone, they squealed horribly. I bought the CRC and had to redo them. Worked great, squeal completely gone. The one downside, but not a deal breaker, the stuff is a bit runny, as mentioned by others. The thicker stuff in the packets work better to hold the parts together when getting the caliper on. This stuff still does it, but not as well. No major issues for me though. This is why I gave it 4 stars versus a 5. This seemed to be the best value. I think you can get the thicker vicosity stuff in a tube, but this was the cheaper solution. Payback for me was only 1 brake change.

Received the package in good condition. The quality is good and worked advertised.

Never had a squeal using this. A little circle wher the piston contacts pad and where the frame meets the other pad and I’ve never had brakes make noise.

I bought this bottle to ensure that the brakes on my car would not squeak or rattle after replacing pads and rotors. Its cheap and easy to apply, and the CRC products I've used before seem to be high-quality at a reasonable price. In order to use the product, you should be wearing disposable gloves. The stuff is bright red, its messy, and it sticks to everything. All you have to do is apply a liberal amount to the back side (the part that is NOT touching the brake disc) of all of your brake pads before you install them, then put them in as usual, and put everything back together. If you still get squeaking after putting these in, you either missed one, or there is something else wrong with your brake system. However, sometimes the brakes make some noises when they are getting "broken in." So just because you hear something doesn't mean there is absolutely something wrong. As long as the brakes are pulling hard, and stopping safely, give it a few days of driving for the new pads to seat on the rotors before troubleshooting any noises for new brake pads. Only reason I am not giving this product 4-5 stars, is the packaging did not stand up to shipping. When I opened the box, the little red cap had come off, and about 1/3 of the bottle had squeezed out, all over the other items in the box. It was a big mess, and as mentioned previously, this stuff is almost impossible to completely get off once it sticks. Luckily it was just plastic and cardboard packaging that was ruined, but it could have been worse. Not to mention I lost 1/3 of the volume from the bottle. So that is at least one less bake job I can do before I need to order more. I'm not sure if its CRC not sealing the bottle well enough, or if Amazon being careless in the shipping, but somehow the combination of this bottle being shipped loosely in a cardboard box ended badly for me. Your experience may vary. If possible, try to buy this product in individually-wrapped packets, instead of a bulk bottle like this. That would avoid the problem I ran into.

Perfect for brakes

Ware schnell erhalten. Leider alle 3 Kartuschen undicht.

Lo uso en mis frenos de mordaza flotante de un pistón. Coloco CRC únicamente sobre el metal de la balata exterior y sobre la mordaza luego dejo secar por 10 minutos y después instalo la mordaza sobre el soporte de balatas y piso el freno, hecho esto la mordaza queda adherida de forma flexible sobre la balata exterior evitando el ruido que tenia cuando pasaba por un bache. No se debe colocar en la balata que esta en contacto con el pistón.

Helped to completely remove my horrific squeal from the front brake after exhausting every other idea.

Been using this for years, great stuff for disc brake pads vibration

Aplique el producto a las balatas que rechinaban cuando frenaba en reversa, hasta el momento funcionan adecuadamente