AMZCNC Hydraulic Hand Crimper Tool for Stainless Steel Cable Railing Fittings for 1/16" 1/8" 3/16" Cable –8 Ton Wire Swaging Tool and 5/32" Stainless Steel Cable Cutter,1/8” Wire Rope Crimping Tool

Crumper worked great for my home gym cable replacements.

I've made about 250 swage crimps for wire railings so far with this tool. It has performed with no issues. I still have another 250 or so to go. My only real complaint is that I wish the handles were slightly longer to give a little more leverage. I have issues with strength in my left arm and it's hard for me to get enough pressure to complete the crimp unless I am in just the right position. I end up having to contort into weird positions to allow using the tool against my leg or to get in a position where I can work from a comfortable angle. If I had "normal" strength in both arms I'd probably be ok, but be aware it does take considerable force to complete a crimp. I've only used the 10ga die so far. It is showing signs of wear but is still working fine. Note that the dies are not symmetrical, so if the cutouts don't like up, flip one of them 180 degrees. You do have to be careful to make sure the dies are lined up when making the crimp. Of the 250 crimps I made, I only had one that came out kinda sloppy, and I think it was my fault for not having it lined up right. I bought this tool specifically for this one job, but if things continue the way they have been going, I think it will last through many jobs in the future. Seems like it was a great deal for the price.

Ignore the reviews about improper alignment. Cheap tools are cheap because they ARE NOT MACHINED, AND IF THEY ARE THEY ARE NOT MACHINED TO TIGHT TOLERANCES. These dies are not machined, they are cast. They DO need to be properly aligned when using, as with any cheap press. If you can't get them close enough, flip one of the dies around. They're not perfectly centered, or even straight. Once you figure that out, THIS PRESS WORKS VERY WELL. Can't say that about the cutters, they only open 1/4". I had some nice ones that fit perfect in their spot in the case - almost like the designer planned ahead on that one. If the fluid is not leaking, and the press moves, you've got a good one - you just need to figure out how to use it. If you're still not happy with the result you need to step up your game and go name brand. Try OTC, they might make a more cost friendly version than snap-on.

These are easy to use and seem sturdy. They take a little while to compress, but require less force with each stroke than the once and done kind. Good for anyone that needs to swag bigger cables but doesn’t have a lot of upper body strength.

I am using this tool for swaging 3/16 SS wire rope. It works well and provides a good crimp with minimal effort. The additional dies provide a lot of options for future use. It's a good value.

This worked perfectly for the first half of my cable railing project. Then, overnight it just stopped working. The lever is completely closed but it just wont get tight enough to crimp. I've looked online several times for any sort of instruction on how to fix..... I tried finding a way to contact the seller.... but I bought this last fall thinking i would be able to work on my deck before snow fell and didn't, so now i'm outside my return window and have to figure out how to finish this project

Small downside. Have a good way to hold this tool while compressing. Can be hard to compress for heavy crimps

Great for doing battery cables.

Bought this one over another option on Amazon based on the fact that this one came with multiple crimping dies at the same price. This tool is of good quality and I would definitely recommend getting it. It worked well for the project pictured and I expect that it will hold up to many years of use.

If you don't have one of these, why not? Superb quality and functionality!!!

I recently used the AMZCNC Hydraulic Hand Crimper Tool for installing a cable railing system on my deck, and it exceeded my expectations. The 8-ton crimping force provided secure and professional-looking swages on 1/8" stainless steel cables. The included 5/32" cable cutter delivered clean cuts without fraying the wire, which was a significant improvement over my previous tools. The tool feels sturdy and well-built, with an ergonomic handle that reduces hand fatigue during extended use. The C-style head design allows for easy side entry, making it convenient to position the cable and fittings. Additionally, the return spring mechanism facilitates quick and effortless operation. Pros: Powerful 8-ton crimping capacity for secure swages Clean and precise cuts with the 5/32" cable cutter Ergonomic handle design for comfortable use C-style head allows for easy side entry Return spring mechanism for efficient operation Cons: The tool is relatively heavy, which may be cumbersome for some users No carrying case included for storage and transport Overall, the AMZCNC Hydraulic Hand Crimper Tool is a reliable and efficient choice for DIY enthusiasts and professionals working on cable railing installations. Its robust construction and user-friendly features make it a valuable addition to any toolkit

Great tool, perfect for fixing the winch on my quad cable and use it to make run for my pups.

Good tool