Longboard Wheels 76mm 80A SHR Mountain Cruisers

I think these wheels are great. I'm no pro, nor am I a serious downhill racer but I have been skating since the mid 70's and longboarding since the mid 90's. I've ridden a lot of wheels, almost all of them top of the line but I read about these wheels and saw they were made in the USA so I decided to give them a try. They are really well made. The cores are straight and the wheels have no wobble. I find them to be very smooth, very grippy and very fast. The company says these are medium fast wheels but I find them comparable to the fastest 80a I have ridden. Not the best for sliding but that is not what they were meant for. For downhill bombing and carving they are a blast. I never do reviews but I was really impressed with these wheels. Update: I just bought some 80a 77mm Abec 11 Centrax wheels. They are considered some of the fastest downhill wheels made today. I compared them back to back with these Bigfoot Mountain Cruisers. Both sets of wheels were in similar condition - ridden, but still with a little skin still on them and both of them were the same hardness. I also swapped the bearings so both sets were using the same bearings. The Bigfoots compared VERY favorably. For straight up bombing hills the edge went to the Abecs but only by a surprisingly small amount. If you were a serious racer it would be noticeable but most people would never know the difference. I think the main area that the Abecs would really outshine the Bigfoots would be steep hills at top speeds. The Centrax are made specifically for maximum grip but they went into slides easier than the Bigfoots. The Bigfoots required more cranking to slide them but they slid smoother. This might change once they are broken in a little more though. At any rate, I am extremely impressed with the quality of the urethane on these wheels. I swapped the wheels back and forth three times because I couldn't believe what I was experiencing. At a third of the price, these wheels are unbeatable.

These are awesome wheels for a long board or cruiser, they are soft yet solid. They carry speed well and are not getting chewed up in any way. Absolutely worth the money and will buy again

Long lasting and smooth. I was a novice when I bought my first set and went through some really rough rocks. I took some big chips out of the wheels and they still rode nicely. I have bought 3 sets now and the latest has skated around 200 miles on mostly pavement with no chips. Blue changes color but red has remained red, just dirty red. Buy these wheels. I'm 230 and very rough on my boards. I ollie and kickflip with these and still no chips. I did crack one of the inner plastic structural rings. I noticed a strange sound about a month ago but no change in ride. The bearings seem to keep the structure strong even while landing hard on these over and over. 80mm is perfect for cruising over rough ground while being small enough to fit under the board. I love 95-100mm wheels but they take a lot of space and can catch your foot (just ask my bloody elbows).

Well worth the money. I wanted some large soft wheels for my board to replace the 70mm slide wheels that were on it. The larger diameter work great over rougher surfaces including our road that is less than perfectly smooth. I mounted them on my old Bustin board with some abec 11 Stinger yellow jacket bearings and they are butter. I'm a 55 year old guy who just wants to cruise and these are great.

Pretty big, sturdy but soft, black works well too for what I wanted. The wheels are great, some of the best for the price your getting, you just need good bearings. I'd definitely order these again. Came pretty quick too, they are a bit slick at first but they'll scuff up.

I'm used to higher end wheels in the 76mm range(for longboards and also the street luges I have built and ride). The first things I noticed are two: 1.) the wheels I received were as near perfect(not lopsided or of bad pour/production). 2.) it was harder to seat the bearings in these wheels, than any other wheels i have ever set up! That would be inexcusable...but they are not to difficult IF you have had experience(CORRECTLY)installing a bearing in a tight wheel. There is a definite trick to it and if you do it wrong you can ruin the bearing. I got my bearings in all four wheels(equals EIGHT difficult bearing inserts! it took a light hammer and a phillips screw driver(sounds odd, but works great). Once they are in...they are fine as long as you make sure they are fully inserted and seated. Many skaters often switch wheels from board to board(and also bearings at times). You won't want to do it with THESE wheels! Plan on leaving what bearings you put in....IN. That won't be a primary issue for most(nor me, since these cheap wheels are being used on one board in particular). I have not had a chance to skate the wheels more than about 4 blocks, during a short dry spell yesterday. They roll very smooth and are VERY 'sticky' at first. You won't be sliding on these...which is a good thing as they are a grippy DOWNHILL and basic cruising wheel. Nice and comfy ride as you would guess from a mid duro 76mm wheel. Only downside i can see so far...past the comparitive pain in the *** ,getting the bearings in. They are SO tight that the bearing rim creaks as you tighten the axle nut to final position. I do not understand why they were not more carefull with core dimensions? EVERY bearing seat presented this way too tight issue.

Perfect cruising wheels for my longboard. You can go over rocks with these bad boys and not feel a thing. I like the look of them and they have been very durable. I’ll definitely buy these again when I replace my longboard wheels.

Buen precio, exclente para free ride, son suaves, no las recomiendo para derrapes, pero si para cruising, nada las atora en seco por su tamaño.

Great for longboard riding

These wheels do not disappoint. They look great and perform great. Just to prepare you for when you get the wheels, you might find little tiny air bubbles on the sides, not a lot though, but this happens to virtually all wheels. My sisters longboard wheels were 400 bucks and has more air bubbles than mine. It looks great all in though. These wheels are a really good option for your board.

Las calles de la ciudad donde vivo no son de lo más regulares y lisas, por eso compré este set buscando una sensación más suave y estoy muy satisfecho. Incluso con asfalto desgastado y suelto o pequeñas piedras y grava, las ruedas pasan sobre eso sin problemas. Quizá aún tengas problema con el concreto desgastado, pero con ruedas de este diámetro no habrá mucha complicación. Incluso comparadas con unas ruedas de 70mm hacen mucha diferencia en la sensación suave al rodar. Por supuesto hay que considerar que son más pesadas, y si tienes un par de riser pads no habrá problema con el wheelbite. Altamente recomendadas si buscas unas ruedas para una cruiser "todo" terreno (en la ciudad).