94124 ILKAR7L11 Laser Iridium Spark Plug, Pack of 4

Great quality and worth the money. Fit my Mazda 3 and have 20k miles on them now with zero issues.

Really great plugs. I cross referenced these against the oem plugs in a 2021 Mazda cx-9. Factory Mazda plugs are 26.00 each and the exact replacement NGK is 21.50. These are NGK laser iridium slightly different part number but the ONLY 2 differences are price and gap. These come pre-gapped at 1.1mm and Mazda needs .75. Prove wise…. 40.00 cheaper for NGK quality iridium and all I did was tighten the gap to.75mm Car runs FANTASTIC! I even asked Mazda about the part number and they confirmed no issue. Save 40.00. Gap them yourself!

Plugs exactly how advertised and they are OEM spec for my 2015 Mazda 6 touring. Installed with no problems and it runs perfectly

My CX-5 was pulling hills poorly, so I took it to my mechanic who said the plugs were fine, but after reading several posts about the necessity to replace them at 75,000 miles, I went ahead and did it myself, and it really improved the cars torque and smoothed out the engine performance very noticeably.

Perfect fitment and match on my cx-5. Theyre authentic and the brand will last many years while keeping the engine and start smooth.

Though Mazda factory installed Denso Spark Plug in 2013 Mazda3, this NGK ILKAR7L11 is EXCAT match to factory installed spark plugs. I just recently replaced my spark plugs for my 2013 MAZDA3 at 100K miles, using this NGK spark plugs, and it worked 100% perfect, !! NO ISSUE!! I would advice any 2013 Mazda3 owner to order this plug on Amazon because it's the BEST VALUE compared to any OTHER competitors. You will need 9/16" magnetic spark plug socket, extended 10mm socket and Di Electric Grease. And preferably torque wrench (though it's not necessary for professional but for normal Joe DIY project I would recommend to get torque wrench). Roughly $45 for spark plugs + $8 for dia electric grease + $30 to $40 torque wrench + 10mm deep socket, you are looking at roughly $100 total project cost for spark plugs replacement of your 2013 Mazda3 YOU WILL SAVE AT LEAST SOMEWHERE FROM $125 TO $150 IF YOU BRING YOUR VEHICLE TO ANY SHOP OR DEALER TO REPLACE YOUR SPARK PLUGS. On top of your saving you can reuse your investment of torque wrench, dia electric grease and 10mm deep socket unlimited times for your future projects.

Great fit for my 2012 Mazda 3 Package came fine but box inside was smashed up bad. Basically wasn’t the delivery driver but whoever fulfilled the order used this beat up box of spark plugs. Thankfully they were okay and 3 of the 4 were perfectly pre gapped. The last one was slightly off. Works great.

Took 25-30 minutes to replace plugs on a 2012 Mazda3 Skyactiv 2.0 with 113,000 miles. Seemed to help smooth out the idle and has a little more power. You'll need a 14mm spark plug socket as well as a minimum 6" 3/8" ratchet extension to get to the plugs.

جدا ممتازة وعملية شراء موفقة

Montadas hace un par de meses y de momento funcionando perfectamente. Tenía dudas de si eran originales o no, porque me salieron muy bien de precio, y y después de dos meses con ellas montadas, funcionan como las que traía el coche, así que muy contento, por lo menos hasta ahora.

Happy with the purchase. Installed on my Mazda 3 BM; haven’t had any issues since then.

Funcionó perfecto en mi MX5 2022

This is the same as OE spark plug. NGK plugs are pretty good so you won’t go wrong with this choice. I’ve tried Bosch, champion, and other plugs, I’ve always come back to NGK.