MHMYDZ 8 Pcs 6 Inch Black Solid Steel Floating Shelf Bracket Blind Shelf Brackets - Hidden Brackets for Floating Wooden Shelves - Concealed Blind Shelf Bracket

I bought these brackets to mount a couple of shelves 1200mm x 240mm x 46mm that i made out of pine to replace the white store bought hollow ones which were going yellow. As others have stated the screw holes are spaced too far apart to get 2 screws in the stud. To get around this problem i had to rotate the bracket 90 degrees so the plate was vertical which meant the plate was wider than the shelf. So i had to cut 2mm off the ends of the plate which made them the same size as the shelf so they can still be seen with a closer look but it is acceptable to me. I used a 12.5mm drill bit for the holes for which both have to be straight which can be a challenge and you will need a longer than standard drill bit.I got around the problem by drilling the holes before i put the shelf together. As others have stated not all the brackets a straight, i found at least one that was a couple of degrees off but luckily i didn't need all eight. I also didn't think the screws were long enough so i replaced them with 75mm screws that i already had, probably over kill but better than what was supplied.

Very solid brackets to mount floating shelves. Make sure they are set parallel to each other for a single shelf or it’s hard to slide the shelf on

They got the job done

Could have been a bit more sturdy.

The brackets were inferior quality, loose and not fit for purpose