Kärcher Surface Cleaner for Pressure Washers, 2000 PSI - Quick-Connect

Worked great! Cut my cleaning time in half. Very easy to use. Not made for large high pressure washers. I use it with a karcher 1700 psi washer. I would definitely recommend this. The only thing I found and it’s not a problem is that the yellow hood is made of thin plastic, but mostly everything is plastic thee days.

I bought this to go with the Karcher 1700 PSI electric power washer. It worked really well cleaning my brick driveway and patios.

I needed to clean a large driveway, and knew this type of attachment would make the job go considerably more quickly. My pressure washer can achieve only 1600 psi, so there was no need to invest in one of the more expensive units built for 3000 psi or more. One thing to note however is this unit has no handle extender, so the "reach" was only the length of my existing sprayer gun, meaning I was a bit more hunched over than I would've liked to be. Another thing to note, and this is about these devices in general -- this thing essentially disperses a tightly-focused stream over a much larger surface area (in this case, and 11" circle), but there's a cost... the stream isn't nearly as strong as the gun itself. So, in other words, it allowed me to clean the driveway more quickly, but it didn't clean as deeply as my high-pressure gun alone can. When you're working with a lower PSI device as I am, it boils down to " Which do you want -- to be done much more quickly, or to be absolutely as clean as you can get it?". This surface cleaning attachment helps with the speed part, but may not get things as deep cleaned as you'd prefer.

So, took me a while to get around to trying this out. Partially because I have an AR electric pressure washer that has somewhat custom hose connections. I had to get a 3rd-party wand and hose with standard quick-release connectors to marry up with my washer. Equipped with the right setup, I started cleaning my pool deck pavers, which are the kind that have contours where the pavers meet, that seem specifically designed to create crevices that crud can settle in. Even worse, with a standard wand you have to go over the pavers in multiple directions so that you can hit all the crevices. It took an absurd amount of time to clean roughly 700 square feet, and not even all that comprehensively. I switched over to using this cleaning head to do the last couple of hundred square feet. The difference was remarkable. The spinning spray heads get to the crevices from multiple directions in a single pass over the area. Additionally, the crud doesn't get splattered all over the place, like on the walls of the house, and into the pool. The only negative is that it doesn't allow you to drive the dirt away from the cleaned area. I'll deploy a second hose to spray the dislodged dirt away next time I use this. Bottom line is, this thing is a must-have for cleaning paved surfaces.

I wasn't satisfied with the results of power washing the sidewalks with the spray wand. Took a chance on this accessory. MAJOR difference and finally pleased with the results. Less time spent and a look I was happy with.

Fast delivery, fast fail. Honestly, this thing worked amazingly for a few hours while completing most of my driveway. I started to notice reduced water pressure and the Karcher 1700 working a bit harder. Where the surface cleaner was cleaning, you would start to see the lines created from the rotary tips. There was a slight wobble in the device. It was not cleaning as effectively as when I first set it up. I noticed a lot of water coming from the swivel join of the surface washer. Disconnecting the hard plastic shell didn't indicate anything. I removed the rotary component that connects to the two cleaning tips. In the pictures you'll notice a washer. The washer had failed and seemed to be increasing the drag and resulting in a reduced cleaning. I don't see any other failed components. Review their own site. The amazon reviews are far better for some reason. I find it hard to believe people used this unit for months let alone days. Avoid this one as it seems like a guaranteed fail.

This works very well. I used it with my Harbor Freight Portland pressure washer and it worked surprisingly well. I've had the pressure washer for about 6 years and wasn't sure if it'd be strong enough but together with this surface cleaner I cleaned the driveway and sidewalk. This is not an REAL pressure washer surface cleaner so you have to go somewhat slow and steady. This is made for an electric pressure washer or smaller gas pressure washer. I would recommend this for most people.

I should have got this a loooonnngg time ago. I recently purhcase a Karcher 1800 PSI pressure washer and bought this along with it to clean my porch and driveway after trying to use Zep driveway cleaner, and a standard nozzle pressure washer, it just took too much time. This was a game changer, even without chemicals! I tested it without chemicals on one section of my driveway which has not been pressure washed in over 12 years (see picture, middle slab was cleaned, I got about 100+ feet behind that to my garage that still needs to be done, and it's dirty as all get out). It took roughly about 20 minutes and the results were awesome. It's pretty straightforward on how to attach it, it uses a 1/4 quick connect just slide back the connector on your wand and attach and it snaps into place and you're ready to go. I am excited to finish the rest of the driveway, it might take a bit, but it's not going to take nearly as long as using a regular pressure washer without this attachment. Get one if you got a driveway, porch, deck, whatever; it's awesome!

Picked one of these up on a Prime Day deal. I'd read a bunch of mixed opinions, so here's my observations. The device works great, makes the work area much less messy & contains possibilities of damaging nearby objects re tearing up edges of your lawn or spraying dirt / rocks. On the other hand, it produces a lot of standing water in the work area so you'll need to spray off the aftermath once you're finished unless the area is tilted and will drain away on its own. Regardless, some form of secondary rinse is probably needed. It covers more area while cleaning, but takes a bit longer to remove some of the trickier spots--so if you're taller like me, I like to sit on a fold up step stool (Cosco one I also purchased here) to allow it the patience needed to clean thoroughly. Some people mentioned a need to move the head in specific directions to make it easier. If it's not essentially levitating from adequate water pressure, you need to fix your connections. It has a metal mesh filter inside the quick connect nub to keep the nozzles from getting debris in them, and likely to restrict the pressure for those who ignore the PSI limits in its specs. If pressure is too low, I would describe the symptoms in lessening degrees as: - easier to move in certain directions - spraying but not rotating - shutting off completely Best way to resolve this is to tweak connections and water volume until you get consistent strong flow from the wand itself, then connect the rest of the pieces. My next area to clean is not level (concrete driveway / apron), so I'm looking forward to an even better experience next! Yes, the device is virtually all plastic but that also makes it light and non-fatiguing. But it also means being careless with it and trapping solid objects like rocks or debris inside will likely break it very quickly--but in that case you've written your own ticket. Very happy with this device's performance for the price, and its engineered design elements that ensure your washer is producing intended pressure levels. I will update as I use it on a wider variety of surfaces or if any reliability issues arise. If anyone wonders what its metal clip is for, it's a handy storage feature for hanging on a edge portion of your pressure washer!

5 stars despite a minor but easily fixed problem. After 5 minutes use the cleaner was not as effective and the photos show why. A small piece of plastic “swarf” had blocked one of the white nozzles orifice. After removing the two retaining clips/nozzles/”O” rings I connected the surface cleaner to the pressure washer and pulled the gun trigger to flush any other bits of “swarf” out of the pipework. The piece of swarf* sticking out of the nozzle was cut off and the nozzle blown through with compressed air to eject the remaining swarf* out of the back of the nozzle (* the two black bits in front of the right hand “O” ring) If I had not had compressed air to use I would have tried to vacuum out the the nozzle rather than poking the swarf out with a pin and possibly damaging the nozzle. So, if you buy this surface cleaner, you may want to consider removing the two retaining clips/nozzles/”O” rings and flushing the pipe work before you first use the cleaner.

Faulty (damaged) product, returned for a full refund. Happy with the outcome.

Excelente relación calidad precio, cumple muy bien su función descrita

No salpica, la limpieza de los pisos es fácil