HyperDip Wheel Paint Kit - Shadow Black Satin Coat Spray

Did alot of prep first to spray my silver wheels. They definitely give you plenty of the release agent for the tires and the aerosol cleaner. Not sure what's so special about the cleaner but went with it. Once that was done and I masked off the rotors/calipers inside, I did 3 light coats allowing it to dry between (which was maybe 5 mins), then I went on to heavier coats. Their video instructions are different from what's on the can and also what's on their website so a bit of conflicting info. I just went around the car doing a heavier coat that the first three one wheel at a time. Just kept going round and round the car going thru all 5 cans. Was a bit confused on keeping it slightly wet as by the time I got around to a wheel again it would already be mostly dry- unless I wasn't heavy enough? Did not seem like all 5 would be necessary at first but once I started laying it on heavier it made sense. Every 5 or so spray coats I'd get a random drip or run but the more coats i did it would level it out. Probably did like 12-16 coats on each wheel in total. Finish is great nice and smooth and much better looking than Plasti Dip. Let's see how long it holds up!

This kit is just WONDERFUL !!!! Just follow the instructions, the prep work takes a little time, but makes a big difference. Just three more things to make your experience better. One buy the attachable spray guns handle this make the job so much easier. Two when spaying, do not get to close you can move you vehicle a little to check coverage. Three pick one wheel and start with that one and count one two three and four. Stay in that pattern. Take your time. The look is wonderful. I found the experience easy. Worth every penny.

Look great after drying, make sure you spray in an open area/well ventilated

First, DO NOT buy this product! IT IS NOT HIGH GLOSS. Dip my car will blame you and say you didn’t didn't do it right. See the pictures below. Here is what happened to me. I recently purchased Hyper Dip Wheel Paint Kit in Piano Black through Amazon. I followed the application instructions with care—reading them twice and ensuring that each step was completed correctly and patiently. My goal was to achieve the high-gloss finish as represented in your marketing materials. Upon completing the application, I was surprised to find that the result appeared more matte than glossy. My daughter even asked why I had chosen a matte finish, noting how it differed from the glossy exterior of our BMW. This prompted me to revisit the Amazon product page to verify that I had ordered the correct item. The listing—including both the images and description—clearly depicts a glossy black finish, which reinforced my initial expectations. I submitted a question through Amazon as they will help you contact the Company. My ask was whether a gloss overcoat could be applied to enhance the finish. The response I received referred to humidity levels during application, which I found somewhat confusing. To gain further clarification, I called Dip My Car support team and spoke with a representative named Justin. I explained the situation and asked again about applying a gloss overcoat. He informed me that your product does not support that and added that the finish may not appear as glossy as some customers might expect. When I mentioned that the product images (particularly for Piano Black versus Shadow Black) suggest a much glossier appearance, he acknowledged that the product would not have a “glassy” look like a vehicle's OEM paint. He asked me to send photos of the final result for review, which I did, but I have not received a follow-up. The only further response I received repeated concerns about humidity and whether the application was done correctly. I found this disappointing, as it implied user error without any direct inquiry into the specific conditions or environment in which the product was applied. Dip My Car never asked if it was done indoors, what time of day, or in what type of space—details that are critical when diagnosing potential problem. It is recommended to apply the product at 50% humidity, and thier response indicated that the humidity at my location was 55%. I find it difficult to understand how a difference of .5% would significantly impact the glossiness of the finish. The HyperDip "Do's" mention 50% humidity for optimal results, while the "Don'ts" make no reference to humidity at all. This suggests that 50% is ideal, but does not indicate that a gloss finish would be unattainable at 55%.I sent pictures again and they changed their response to I had put the product on to slowely and therefore it will not gloss. Dip My Car accepts no responsibility and they just look for excuses and play the blame game. They even sent me a video with how to guide. This is funny as it is not in any of the instructions. Given that both their website and the pictures on the Amazon listing strongly imply a glossy finish, I feel that the product is misrepresented in its marketing from Dip My Car. If the Piano Black finish is not intended to be truly glossy, this should be made more xplicitly clear in both the product description and accompanying images.

works well the texture is great. the paint looks great coverage is amazing

I've been using Plast-Dip for years and decided to give this a try because of many positive reviews. There was a learning curve as the application of this product is similar to Plast-Dip there is a slight consistency difference and your stroke angles and coating thickness have to be done slightly different however overall very easy to apply. I remove my wheels from the vehicle as I've always gotten more professional results that way. Wheels coated perfectly and looked great. My original impression was much better than Plast-Dip and the finished product was much more durable than Plast-Dip. After fully curing it passed multiple tests of going through automated carwash and never showed ANY damage which was impressive. Only negative I have is that my Plast-Dip wheels always held up good with road rock damage and for some reason even though I had 12 coats of this on each wheel I was constantly getting chips from road debris. It got so bad I finally had to remove the product and went back to stock color wheels for now. This was my only complaint and while it is possible that I could have done something wrong during application the product did so well in all other areas that I don't think I messed anything up. There are still many positive reviews on this product therefore for the low cost I would still recommend you try it. Just because it didn't fully work for me doesn't mean it won't for you. I'm in no way bashing on the product I just will more than likely not be using it again.

Went ahead and painted the wheels while wheels were off the car (brake job) Used the included microfiber towel and pre-dip spray to clean them off very well, then moved forward with several very light coats, then follow up with heavier coats until using nearly all of the included cans... All in all - i am very happy with the result. Cannot comment on the long term here, as it was just sprayed within a couple weeks ago. But it looks great and relatively easy to apply.

Changed the look of my 4Runner ! Love it . You MUST prep your wheels properly before spraying . I did 4 tack coats and 7 heavy coats . I’ve already gotten many compliments .