🔧 Unlock Efficiency with Every Turn!
The Valve Core Removal HVAC Tool by AutoWanderer Tool is a premium brass tool designed for easy and efficient removal and installation of valve cores in air conditioning systems. With dual size SAE ports (1/4'' & 5/16''), it is compatible with various refrigerants, ensuring a reliable and leak-free operation. The tool features a non-slip design, built-in magnet, and comes with a complete package including 20 valve cores and a brass adapter, making it an essential addition to any HVAC toolkit.
| Manufacturer | AutoWanderer Tool |
| Brand | AutoWanderer Tool |
| Model | valve core tool |
| Item Weight | 6.4 ounces |
| Package Dimensions | 4.45 x 1.85 x 1.81 inches |
| Item model number | 1112 |
| Manufacturer Part Number | AWT-1112L |
S**T
Functional
It was less expensive to buy this complete kit than the seal gasket for the Yellow Jacket core tool I had - it worked very well
H**X
Good for critical charge units.
Like what others have said it won't cling to the core as is. Not what I needed it for. I used it to recharge a critical charge unit after fixing a leak and it did great. Lost no referent from the system. Only what was in my line set. Tho it should be easy to glue a small magnet in the stem to get it to hold on to the stems.
E**S
Poorly made and dangerous.
I agree with another reviewer 'Miphil'. This totally came apart where it screws to the charging port. It has a snap ring inside. It popped off as I gently tightened it. Very dangerous if had fully connected and removed the valve core.If you want a good removal tool, check this one out.https://www.amazon.com/gp/product/B08FBVYD28/ref=ppx_yo_dt_b_asin_image_o00_s00?ie=UTF8&th=1
E**O
works well
the ease of this tool and uniqueness of this tool is amazing
M**L
Not the Best Machined Tool but Gets the Job Done
The cap of the stem is a little crooked, so if you use it to remove a valve core from a pressurized system, the valve core may fall off inside the tool when pulling back and you will have a very bad situation to deal with. However, in my application, I only need to put the valve core back once pressurizing the system. The valve core was removed when the system is empty. For this application, the tool does its job and is cheap. If you need to remove the valve core when the system is pressurized, you may want to get a more expensive tool.
L**R
410 adapter leaks around 1/4 saw end
Leaks. With 410 adapter won’t reach s header valve
J**R
Nice adorable tool
Works great for changing out Schroeder valves .
R**.
Correct item.
Works like it should.
ترست بايلوت
منذ شهر
منذ 4 أيام
