Spartan Mounts Locking .223/5.56 Rifle Mount Wall Display | Low Profile Floating Design Vertical and Horizontal Mounting Solution | Gun Room Safe Storage Organzation | Made in USA

Product come exactly as seen with mounting hardware and some stickers. Printing is good, layers properly bonded. Not over heated. Fitment was spot on, just lose enough it drops in and holds but not so tight you have to work it off. I purposely mounted up my heavy unit on it and pulled on it in all directions to see if I could break it in a simulated stress scenario. The mount flexed enough it didn’t break and immediately returned to shape. It was clear to break this you would have to actually have to want to break it. I was impressed enough in going to buy more.

Update: I recently received a new mount with no request. This new mount has been improved upon greatly. The rigidity and finish is a lot more on par with high quality parts. I am amazed of their customer service, which I contacted due to the confusion of getting a new mount in the mail. They responded in less than a day. I am extremely satisfied with this new mount as they clearly are paying attention to consumers. I bought their Pmag mount as well. I will be doing more business with Spartan Mounts. Thank you. Old post: It’s 3D printed material. If you try to tighten it to the wall. It will fail. If you don’t tighten it, it will be a wobbly mess. It looks great and works pretty good; however, I epoxied it so it has more strength as, again, it failed.

Love it well made, sturdy and made in the USA

It appears well designed, and locks into the magazine well on my MCX without issue. It was also very easy to mount. My only concern is that it is 3D printed, and is very light to the point of feeling flimsy in the hand. It does flex with moderate pressure. If it felt more durable, I would order 3-4 more without hesitancy. As it is, I'm going to give the one I have some time to see how durable it actually is.

This mount does a very good job and is easy to insert and pull the rifle from.

Theres not too much to say about it other than it works. Seems well made. You can tell its a 3D-printed part, but so what. If you have P-mags, you can hang one from the bottom of the mount. You turn it upside down and slide it in. Neat feature. If you have a heavier barrel gun, your rifle will tilt slightly forward when you hang it. If that bothers you, just remount the mount with a slight backward tilt, then drop your rifle onto it. I didnt care that hard, I just wanted a hangar that wasnt a metal J-hook style, and this works great. They could definitely improve the design by more closely molding it to the shape of a magazine for a more snug fit. Also its made in the USA, and I can support that ALL DAY! It comes with 2 screws and 2 drywall hangars, but if you are like me, you got some other mounting hardware that may be better suited to your application. Also, if I were anyone, I would use all 3 mounting holes. It will just be more stable, but do as you will.

As others have said, it's clearly 3d printed. Like stock ender3 quality printed or Prusa speed cranked up printed. For mags it would be fine but I'm appreciative about the weight of a full sized rifle with accessories due to the inherent layer weekness of printed parts but it looks decently designed so will likely be fine. I was expecting injected nylon or abs not printed petg. That's on me, should have read more carefully. What's not on me is I spent $35 on a printed part that I then had to do the post processing on. Holes aren't terribly misshapen but I had to clean out a good bit of filament out of in order to be able to pass a cable lock through. It'll be good enough to mount a cheap rifle on but I wouldn't trust anything with a decent optic on to be more than a few feet from the floor. Price needs to be lower or quality high to be considered a decent value. I won't return because it's a small company but they should be more upfront that they're selling their own version of what's commonly available in dozens of versions (probably more) for people to make themselves.

It's extremely easy to install only needing two screws which are included. It's very sturdy once installed and the material is 3d printed which I was worried about, but it's quite good and I don't see there being any issues with that last at all. A nice bonus is it has a spot right below it to hold a p-mag which many other similar mounts did not. For around 20 bucks this mount is great and is a must buy if you are looking for any mount for you ar-15.