Tipton Ultra Gun Vise with Heavy-Duty, Customizable Design and Non-Marring Material for Cleaning, Gunsmithing and Maintenance

Great tool to have in the shop quality made and works on most any firearm

I have used Ultra vice twice now to remount a scope on a CZ 512 using the Tipton scope mounting kit (another Tipton product I am glad I bought) The scope mounting process is SO much easier using this vice. I used the four corner adjustments to level the vice and it has not slid around at all while performing jobs like lapping scope rings and torqueing screws. It is a bit heavy which I count as a good thing as that contributes to stability. I read another review that complained of the elevation function not holding up well. I did have one slip down on the barrel end. In my case I retightened and no further problems. The 512 is not very heavy. I could see it happening on heavy weapons though. I may drill and pin the slide at the common positions if that becomes an issue for me. A small hole(s) and a nail(s) should secure it without weakening the device. The frame is metal and the rest is some sort of plastic/resin looking type of material. It was rigid and strong and it held my rifle easily in position for the work I performed. The pads don't look like they would damage a weapon, The adjustable or removable trays are very handy for holding screws, turret caps, tools, locktite and so on, and contribute to the rigidity of the frame. They also serve to help keep things separated and organized so they can be installed in their original places. I looked at several gun vices and thought I saw weak points or features I didn't care for. No product is perfect, but I can tell you I have no remorse on this purchase.

Very high quality. I highly recommend purchasing this exact gun vice. All the other gun vices are flimsy compared to this one. This one has a powder coated steel frame! This gun vice literally locks your weapon in place to effortlessly clean or work on it.

I've had the Tipon "Best" Gun Vise for years - and it stunk. The cam clamps to hold the stocks were lousy at best; the height adjustment was clumsy and the plastic was crazy cheap feeling. This has the stability, flexibility, versatility and clamping strength that you've always wanted from a table vise. It feels like its a fiberglass composite material - very rigid. The oversized red knobs for tightening are very ergo friendly and comfortable. Some reviews talked about how the vertical adjustments wouldn't "stay" and they kept slipping back down - which I did encounter as well. Stumbled onto a YouTube video of a guy explaining you have to sand down the side walls of the vertical support because they're toe-nailed a bit - and once you sand them down to make them flatter, theres much more bearing surface for the pad to grip to hold the vertical support in place - and it really does!! I even used 60grit sand paper to keep it course to assist with the grip. Been very pleased with my hand-sanding mod. (Be sure to have a sanding block behind your paper to ensure you're sanding it perfectly FLAT!) Have got quite a few Tipton products around my bench - and I've loved all of them and have given me years of quality use. Except their "Best" Vise. This Ultra vise deserves its name - I can finally LOVE my vise.

I purchased the Tipton Ultra Vise through Amazon. The Vise arrived in good shape, and as I removed it from the box and began to assemble the pieces onto the device, I knocked one of the chassis pieces off the bench and it hit the concrete floor in my garage. The fall broke one of the adjustment knobs wherethe knob attached to the plastic insert it was designed to loosen and tighten. I did not realize it was broken until I went to screw the knob backwards to loosen the part and the knob completely backed off of the Vise chassis. Looking at the plastic and how it was assembled, the design for this is not very well-made. The piece the knob attached to is very thin plastic and the plastic is extremely brittle. The fall from the bench broke the plastic at the attachment point. Looking at how brittle and thin the plastic is and the fact the entire product is made with knobs attached to the same kind of thin brittle plastic at all tensioing points, I’m quite sure a small amount of torque applied to any of the knobs will break and shatter the plastic. The knobs are going to require gentle handling to avoid breaking. To be fair, I contacted Tipton and they offered to send a replacement piece without question under the warranty. That was a pleasant surprise, especially when the damage was clearly my fault. It is great to have a company that stands behind their products. However, a simple design change both in how thick the plastic is, and the type of plastic being used would probably solve the problems for them and cause a lot less headaches for the end user who purchases one of these. Overall, the Vise looks to be solid and will be a great platform for working on firearms of all types. However, to answer the question from those who asked if this vise could be used as a shooting vise, the answer would be absolutely not. There is no way you could torque down the adjustment knobs, tight enough to hold a rifle steady for firing without damaging the tensioning mechanisms. And the device would not hold up to recoil. The company is so willing to stand behind the product and the device is still functional for what it was intended to be used for. I am only giving it four stars, because a bench vise at this price should not require the user to have to gingerly handle the components and mechanisms to avoid breaking a piece that was designed to loosen and tighten down on and hold work pieces. The thin plastic, and the brittleness of the plastic under the knobs are a major issue. I would still recommend the Vise overall, But would strongly caution anyone who purchases it to avoid overtorquing any part in the adjustment knobs are designed to tighten down on. Hopefully in the future, Tipton may redesign the system and make it more durable.

Out of box, the middle cradle was broken. Emailed the company with a picture of the broken part. Had a new one in 8 days. The unit levels east. Very flexible configurations for different long guns and tasks. Will not damage guns yet holds them firmly. Makes scope installing super easy. Price is good. Very satisfied all around.

Super flexible rifle vise for working on rifles

Allows complete leveling front to back and side to side for rifles. Fastened securely is very reliable. Made of good materials.

Molto utile

This Gun Vise is by far the BEST in the market, I am impressed how solid and well made is, highly recommended.

Nach versehentlich falscher Lieferung wurde sofort gehandelt und ich bekam mein Artikel wie bestellt. Sehr freundlicher Kontakt, die Ware ist in einwandfreiem Zustand.

Equipo sólido y de muy buena calidad

Sehr flexibel, lässt sich insbesondere an AR15 Gewehre anpassen. Alles massiv und gut gemacht, allerdings auch viel Plastik dabei. Schön wäre, wenn statt der Schrauben zum Ausrichten eine Möglichkeit gegeben wäre, die Vise an einem Tisch oder Brett festzuschrauben. Ein Wort zur Verpackung: Ich schicke das erste Paket zurück, die Verpackung war massiv beschädigt und der Inhalt auch. Das zweite Paket kam, wie das erste, aus Spanien in einer windigen Folie eingewickelt und auch beschädigt! Das sollte Amazon besser hinbekommen!