Husky Liners — Rear Wheel Well Guards | Fits 2017-2024 Ford F-250/F-350, Black, 2 pc. | 79131

With what these trucks cost these days, it's a huge foul that Ford doesn't include rear wheel well liners from the factory. It looks totally dumb that the front has a nice liner and the rear is just raw paint. These are a perfect fit on my 2024 F250 Lariat. Install was super easy. If you have strong hands you don't need a trim tool to work the liner behind the fender lip like is shown in the manufacturer's YT install video. The install literally took 10 minutes per side. I had one mounting hole in each liner that was off by about 1/8". Easily fixed with a box cutter. I enlarged that hole a smidge and done. Not docking the product for that little thing b/c the rest of the liner is flawless. The engineer that designed the molds for these plastic liners should get a raise. They fit that well. Looks 100% factory. Shame on you, Ford, for making me buy my own. These liners are made of thick plastic. I don't see them ever wearing out. I will advise cleaning your wheel well REALLY good before install. Particularly the lip/arch. Dirt just sits there even if you hose off the wheel well very well. I used compressed air to blow the dirt out of the arch. Then I used a big car wash sponge and my car wash detergent/bucket to soap up the wheel wells really good and scrubbed them down. Rinsed really well with the garden hose. Used compressed air to dry it and let the truck sit in the 90-degree heat for a few minutes to let the rest of the water evaporate. You don't want to trap dirt b/t the liner and the paint if you can help it. The truck looks so much better now. Amazing how such a small change can have such a large impact. Now, the truck just "looks normal." Nothing special. But BEFORE the liners your eyes were immediately drawn to that appearance imbalance between the front and rear. At least my eyes were. This is a super easy install A 10mm socket or wrench is the only tool you'll need, assuming you can muscle the liner behind the lip without a pry tool. Highly recommend these Husky liners.

I bought these here on Amazon. My truck is a 2024 superduty. I just bought it a Week ago but it did not come with inner finders and I wanted to get them covered before many miles were on it. I read many of the reviews and then ordered them. They came quickly, UPS in a big box. Could not tell which was left or right so stuck them in to get the right fit. there was some talk in the reviews about a clip not fitting due to a lip on the inner side of the finder. I found this to be true on one clip for each side. No worries, just stick the clip on the other side as these clips have a thread as a nut, and so you just use the existing hard where provided by putting it on the inner side and running the bolt through it . When you tighten it down , no one will know and the inner finder will be mounted . I noticed other holes for extra fasners if you wish. I did not bother, the plastic liner is a tight fit any way. It will stay in place. Just use the hard ware they send you and you will be good. It is a good fit. I thought they were thin but they are good quality plastic. hard to get the lip in but that helps hold them in place. They are glossy black with a ruff look texture. Very impressed. I think they look great.

I have a 2017 F-250 XL 2WD Crew Cab Long Bed. As far as I know there have been no modifications to this truck prior to my purchasing it. It was used as a work truck/fleet vehicle so I highly doubt any one wasted the money. That being said, with my fairly basic trim level, these liners still were not a perfect fit. They are darn close and once you get the first one on the second one will go much easier. But the part that runs down the wheel well towards the tailgate did not slip under the factory trim all that well. It took a lot more elbow grease than it should have. Likewise it was impossible to use the provided u-clips as designed. They do not function as u-clips but rather as nuts for the provided screws. Not exactly a big deal, it gets the job done, but for $100 for some plastic liners you would think that Husky would bother to make the provided hardware specific to the vehicle and not universal. Also, I could only manage to get 6 of the 8 of them installed at all. All in all though the liners went on fine and look great and they are secured well to the truck without any need for modification.

Excellent product, fit perfect on my 2020 F250. Neat clean design and easy to install.

This is my second set of these. First set was for a 2018 F150 and this set was for my 2017 F250. They fit great. Tight fit but that is good. No shaking around or rattling or anything. On light colored trucks I feel they are a must have. Wheel wells should be black, in my opinion, and they look so much better with these liners.

fit like the originals

Fits like it should and looks great

They look great. They were kinda difficult for me to get the last part over the lip of the wheel well. Other than that they fit and line up like they are suppose to.

Un producto con una excelente calidad en su material y con un diseño a la media cien por ciento apegado a lo ofrecido.

Excellent quality, have had them in my truck for a cople years now and they work mint. Fit quality on my 2017 F350 is perfect.

Perfect fit for my 2022 F-350 XLT. The instructions were pretty good, and I had no issues with the installation. The installation took ~30 min.

looks good

Great, except not perfect installation instructions for my '21 F350. They advertise as no drill, easy install, fit for your truck. This isn't the case w/ my truck as some YT videos have pointed out. One of the clips does not go on as the instructions say. You end up having to either cut part of the metal piece of your truck or not installing it 100% correctly. They do look great.