











Desertcart purchases this item on your behalf and handles shipping, customs, and support to KUWAIT.
🚀 Upgrade your ride with MOOG: where precision meets power!
The MOOG K80026 Suspension Ball Joint is a precision-engineered, greaseable front lower ball joint designed for Ford F-250 Super Duty trucks (1999-2022) and compatible with various Ford and Dodge models. Built for heavy-duty durability and off-road resilience, it ensures stable steering, reduces vibration, and supports proper wheel alignment for a smoother, safer driving experience.





| ASIN | B000C54496 |
| Best Sellers Rank | #74,766 in Automotive ( See Top 100 in Automotive ) #58 in Automotive Replacement Suspension Ball Joints |
| Brand | MOOG |
| Customer Reviews | 4.6 4.6 out of 5 stars (1,428) |
| Date First Available | November 10, 2005 |
| Exterior | Machined |
| Item Weight | 1.4 pounds |
| Item model number | K80026 |
| Manufacturer | MOOG Chassis Products |
| Manufacturer Part Number | K80026 |
| Model | Lower Suspension Ball Joint |
| OEM Part Number | K80026 |
| Position | Front |
| Product Dimensions | 0.6 x 1.6 x 0.6 inches |
A**R
This was for a 1999 Dodge Ram 2500 4x4 Diesel not a Ford F-250
First of all, these were for a 1999 Dodge Ram 2500 diesel....not a Ford Super duty as the headline says. After reading several reviews on Moog products, I was concerned about where it was going to be made. I learned that if they are "The Problem Solver" series, the chances are very good (not guaranteed) that they are from the USA. These were made in the USA....so that was a win. If you have ever replaced ball joints then you know, there is no easy way to install them. That's not the products fault....it's just a pain. I could not leave an honest review on the longevity because I haven't even put a hundred miles on my truck...but, so far so good. I will update in a hundred thousand miles lol. The instructions indicated that you had to install the grease Zerk, grease the joint then replace the the Zerk with the plug provided because the Zerk will hit the axle u joint if left installed. I discovered that if I carefully filed down the bottom of the Zerk (it's an elbow style) you can get just enough clearance and you won't have to re install the fitting every time you want to service the ball joints. This has been the only design flaw I have noticed thus far.
I**N
Moog for the win.
These are solid upper ball joints. Pros Pre greased Tight movement Fit well Pin and castle but included Cons None. These ball joints fit well and are a direct replacement for a Ford F350. Seated well and tightened up to torque spec. Steering has improved and the play wad removed from the steering wheel.
J**2
moog ball joint
Came quick from UPS. Ordered two of these and two uppers for my 2004 F350 4x4. They're good quality Moogs, no worries there. Only thing is, make sure you grease the lower ball joints then remove the zerq and install the plug before you put the steering knuckle back on the axle shaft. The zerq does not clear the u-joints. Also, make sure you put the rubber boots on as stated (on the boot), otherwise they will not hold grease properly. I threw the zerqs in a tylenol bottle and put them in the glove compartment. I grease the front end every oil change (5,000 miles for my diesel). It's easiest to get to the plug/zerq for example: drivers side turn tire all the way the right. The plug is some odd size, neither metric or standard, easiest to get on and off with a small crescent wrench. Best thing of all about these ball joints is the price. Way cheaper than from any three of the local auto parts stores. Saved 150 dollars just on ball joints.
A**R
Moog what more to say
i have two older ford trucks on with a little over 400,000 and one with just under 300,000. i have gone through a few ball joints over the years. i have always used Moog. i seem to get about 70,000- 90,000 miles before they start to get a little more sloppy than i prefer. i normally replace upper and lower and i normally replace both sides at the same time. the only thing i have noticed if an alignment shop releases the preload on the ball joints their life is shortened drastically.... like it cuts it in half .. so i do not have front end alignments done once new ball joints are put in. i have always been happy with Moog products. and would recommend them to anyone. yep i think ill use the same write up on the lower ball joint
A**S
Hardware incompleto
Ambas rotulas les faltaba el reten que la sujeta en el brazo de control
R**Y
The right size thank you
Easy to install durability fits quality good
J**N
good price
worked perfect in my 99 super duty and cheaper than the local parts stores
W**N
Excelente
Buen reemplazo para mi carro
Y**D
مسمار تعبئة القريز
مسمار تعبئة القريز يحك في صليب الدبل
R**L
MOOG K80026 ball joint
Fits application perfectly, easy enough to install if mechanically inclined, but will take a few hours. Special tools required so make sure you can do the job, maybe watch a YouTube video first. Great Moog quality product, better than OEM as they come with grease fittings. Better warranty than OEM too. Good price online, fast shipping, perfect fit per application. Maybe look on Moogs website to make sure you get the right part!
S**I
Quality part, great price
Very high quality! Very low price! Fit super good! Just the right part for my truck! Very happy!
D**N
Five Stars
Very happy with my purchase & its performance! Thank you.
D**E
American standard
Shipping was great was proper part and quality is second to non period
Trustpilot
1 month ago
2 days ago