EaseLife 5.5 FT Heavy Duty Sliding Barn Door Hardware Track Kit,Basic J Pulley,Slide Smoothly Quietly,Easy Install (5.5FT Track Kit for 30"~33" Wide Single Door)

Great kit. Had no issues with the install at all. It's sturdy, slides smoothly, and looks great. Just an amazing value. My only complaint is that everything in the manual was in metric (cm vs. inches) so I had to do a lot of conversions for measurements and drill bits. But that's such a snotty American complaint. As an aside, I think the US should switch to the metric system. We are the only big player not on it and that's just not fair to anyone. But in the meantime, i know inches and the instructions are not in inches. So a lot of conversions on my phone as i went. But no biggy. I also had a scare during install that my door was too tall. When you hang the rail and get your door ready to hang, you will probably have an "oh sh*t" moment where you are POSITIVE your door is too tall. You'll curse the metric system, curse the instructions, and recheck your measurements. Do not despair! It's probably perfect. My door had about a quarter inch clearance at the bottom but when right before it was hung there was definitely an optical image that it was WAY too big. Great kit!!

This was so easy to install and it’s very sturdy. The door slides smoothly and looks very clean.

I didn't like the directions so much, they were a little complicated and I found that they were inaccurate as well when it came to measuring the distance between the top of the door and the center of the hole for the brackets. There were two different dimensions. My instalation was easy enough because what I had was three doors that actually opened on hinges. I wanted to make the center one a slider because it was annoying to always have to open it. So from the top of all the other doors is how I calculated all my measurements. I'm pretty sure that most of these kinds of sliding door brackets are going to be complicated in this way, i.e., MATH. I also elected not to use the bottom center glider because that meant that I would have to get a router and then make that cut and that seems a little bit inconvenient for hanging a door like this. So what I elected to do instead was find bracket that was for a closet door and modify it for my use. I also just installed new laminate flooring and I didn't want to drill holes into anything so I used double sticky tape to put the bracket on the floor. I think I need to invent some sort of a bracket that will be used in a situation like this because I could find nothing that would really work for what I intended. But as far as the rails, they are awesome and the wheels glide perfectly, there's no binding and I am happy with this setup.

Very happy with the barn door kit. It was easy to assemble and install even without directions. Works perfect. Wheels seem to roll very nice and are whisper quiet. Only mod I made was to make a small dimple on top of the track where the wheel stops when fully open so the wheel sits in it because even with it being 99.9% level it still closes by itself...Door I built weights about 40 pounds but can open and close with 1 finger...that's how easy it is to open and close. I would have given it as 5 star if it came with instructions.

Matte black looks great. Husband thought it was easy to install and quality product.

This sliding door hardware worked perfectly. As long as you install it level and hang a square door level from the rails, it slides with one finger. Although the directions are a bit off (as others have said) I did not have to redo any steps. Read everything first and make sure that you install the stops before bolting on the track as that step is out or order in the directions. Makes the installation much easier. This came with bolts for a 1 3/8 door (separate package) and a 1 3/4 door (packaged in the spacers). It also came with masonry anchors. Really, it has whatever you need. I installed a 3/4" decorative header board because I needed the door to get past both base boards and quarter rounds. Hangs perfectly and clears everything. I would buy this again if I ever need to put up another barn door. For the door, I made an 87"X87" and the system handled it well. I used 1/4" plywood with 1X4 trim on the surround and cross braces. I put the trim and cross bracing on both sides for rigidity - resulting in a 1 3/4" wide door. Worked perfectly. The only complaint is that all the measurements are metric and the bolts are metric head. Certainly not a deal breaker but it did require lots of marking in place rather than measuring because my measuring tape is standard and does not have millimeters. Not a big enough complaint to lose a star!

I bought and installed several years ago for my hay barn. They are intended for indoor use, but have endured the rough use of a barn door opened and closed daily for over two years. They were easy to install and operate smoothly. They'll jump the tracks when my dogs bang into the door while it's open, but I would expect that. I would recommend to a friend.

worked out perfectly thank you it was actually so good. I ordered another one.

We used this to attach a barn door to our outdoor shed. It arrived quickly and the sellers were very repsonsive! Great product that looks awesome!

Well made and good sturdy quality. Also glides quietly and smoothly even with my super heavy door on.

Work great. Rolls freely. Instructions are pretty straight forward.