6 Pack Screen Protector for Garmin Vivomove Sport Easy Install, Ultra Thin Smudge Resistant Anti-Scratch Anti-Bubble Clear TPU Film

As long as you follow the directions, it works well. It only lasts a few months, and the first part of it to get dirty is something somehow getting underneath the edges. It helps keep my screen clean, and if it ever gets scratched it was either due to my own fault or a cat scratched it, etc. It coming with 6 means it can last me quite a while, and it sticks REALLY well so long as you clean your watch as best as you can during application. It has an edge but its not really that noticeable if you put it on correctly. I can still touch the watch as well rather easily. It can be hard to apply by some people, but with 6, be as messy as you want figuring out how to first apply it- then take it off and try again. One pack has lasted almost a year if I didn't mess up application a couple of times, but now I have the hang of it.

Bought it for my Garmin Vivomove Trend and it fits perfectly! It feels like there’s absolutely nothing on the watch to the point I have to double check it’s still there. I tried a glass protector but it didn’t fit at all so this material works great. I’m on my second protector and I love it. Last long, it’s protective and looks amazing.

Definitely a learning curve getting these things on. I wasted the first one trying to figure it out. Once I was able to get it on, it was great! Each one lasted for about a month and then fell off. I am purchasing again after about six months. A couple of them had minor bubbles after they were on for a while. I don’t mind that they don’t last forever because it’s a pretty inexpensive product and $10 every six months to protect a screen is not bad. It also comes off clean and easy and does not leave any marks on the screen.

Clear view, easy to apply, fit perfectly. It will be interesting to see how durable they are as the others haven’t lasted more than a week. They seem to be a better quality than other brands.

Went on good. I’ve got a bobble but it’s from washing my hands and sweating. Getting wet and trying to clean it. But it’s a good thing I had something helping with scratches

Thin sticker like film protects watch face. I have used same one for a few months and have not needed to replace it yet.

Potentially a good product, but with terrible instructions! I got these in February 2025 for my watch, and the first thing I noticed was the box instructions (clearly for a phone, not for a watch) differ from the instructions on the screen protector, so I opted to follow the steps on the screen protector itself. Unfortunately, following the instructions results in no screen protector being applied to the watch! So for the last 10 months my watch has been completely bare, but I thought there was a protector on it. When I first did the installation, I was dubious of if the film had been applied at all, but reading through the reviews and looking at the photos, everyone claimed it was "invisible" or "nearly invisible," so I didn't worry about it. Now, 10 months later, my watch is scratched up quite a bit, and I decided to go and replace it with a new one, only to find out there was nothing to remove. I'm convinced most of the reviewers don't actually have anything applied to the watch. If you successfully applied the film, there will be an obvious ridge to feel near the outside of the watch face. If it feels completely smooth, you never actually applied the protector. I found a review from a similar IQShield watch product with the correct instructions: First, this screen protector DOES NOT use the liquid spray installation method I have used with other protectors from this brand. Unfortunately, the Amazon sales page for these has a video showing that method of installation, which is not what these use. Second, they do have installation instructions on the outside of the package for these, but they are for a phone screen protector and are at best confusing. I ended up ruining one of the protectors since the instructions really did not match the actual installation method. The instructions on the package, which are shown in another of my attached pictures, discuss partially lifting up stickers #2 and #3 and using the squeegee to push towards the end of the protector. However, labels for #2 and #3 are both on one sticker at the center of the protector, not two stickers projecting past the ends as shown. Second, you do not use the squeegee to push like they describe. Instead, you actually have to pull out and discard the thicker bottom layer from under each end of the protector so that the remaining actual protector now will adhere to the screen. So basically the proper steps are the following: 1. Clean the screen of your device with the included microfiber cloth and dust remover stickers. making sure that the screen is free of dust. debris and fingerprints. 2. Using the sticker labeled "#1." remove the bottom prolective layer. Once removed, align the screen protector to the screen of the device and gently press down on protector to secure it in place. Note that the bottom layer is not really adhesive, it is just a split rubber sheet that somewhat sticks to the screen, but only at its highest part. 3. Once you get the protector aligned, hold the bottom end against the device’s screen and gently lift up the top end of the entire protector. Carefully peel out the top half of the rubber layer from under the remaining layers of the screen protector, then press the protector back down securely onto the screen. 4. Now hold the top end of the screen protector against the device’s screen and gently lift up the bottom end of the entire protector. Carefully peel out the bottom half of the rubber layer from under the remaining layers of the screen protector, then press the protector down securely onto the screen. 5. Starting at the center of the screen, any bubbles can easily be pushed towards the edges of the device using the included squeegee. Finally, use sticker #4 to peel away the top protective layer. 6. Using your fingers or the palm af your hand, firmly press down on the edges of the screen protector." It is absolutely ridiculous that I should have to source installation instructions from another person's review. I can't comment on how well the product works because it hasn't actually been in use--but quite honestly, I don't care how well it performs at this point since my watch is irreversibly scratched. IQShield needs fix this ASAP before more people get confused by this lousy product.

Good thing it comes with six. It took me four tries to install it, and that was by making up my own steps on the fourth try and not following the instructions on the package. Steps 3 and 4 where it refers to stickers 2 and 3 were writen for a phone screen where they are separate stickers. On the watch size its one sticker with the numbers 2 and 3 on it. Once installed, it's completely invisible and no impact to touch sensitivity. The two-star mark down is purely for the instructions.

it is opaque cant' see anything plus is divided in 2 pieces

i like that it's easy to apply. it fits nicely but there are little gaps between the edge of protector to the edge of the screen.

This screen protector was exactly what I needed! I have historically been pretty hard on my electronics, and I really wanted to make sure that I protected this watch. It's easy to install, discrete, and has protected my watch from scraped, scuffs and scratches. I appreciate that there are multiple in the pack as I feel that I'll have to change the cover every 6 months or so as I beat it up. Very happy with this purchase!

Wow, they have the best customer service I've ever had ! The screen protector is easy to installed and it's well explained.

Within one week of buying product screen product or on and didn’t prevent any small scratches