Fotodiox 7 Step Up Ring Filter Adapter Set, Anodized Aluminum, 49-52mm, 52-55mm, 55-58mm, 58-62mm, 62-67mm, 67-72mm, 72-77mm

I much needed accessory, at very good price. Well built, and well precision. This comes handy if you are trying the economize your budget by avoiding buy of multiple filters for multiple lens. Beware that these are not thin rings, and if you do not have thin filters it may add some vignette in very wide angles. However I did not experience this at 18mm (DX format), but I think you should test it on 8 or 11 mm wide angle lens.The bonus is, if you stack all these rings, it acts like a lens good :) Off course not like a real one.I am happy with the quality of these rings.Please note - these are step-Up rings. That means once you put a ring on the lens, the next attachment (eg a filter) should be of higher diameter. I think that is very useful. Say you have a 62 mm polarizer, you may use it in you 52mm diameter lens or 55 mm diameter lens, thous avoid buying individual filters for individual lens. However, keep in mind to protect your lens glass its always a good idea to keep a filter attached in each.In Amazon there is also Step-Down filter, and I really do not find a use of those because it will add vignette. So I specifically bought the step up filter and not the setp down ones.

I'm an ameature photographer with a D90 and 3 lenses. I decided to take advice I'd read and been given and stop buying various size filters and use step up rings to standardize around 77mm filters. This doesn't seem like a big deal if you are buying $15 filters, but once you start buying $50 filters (or more!) then the thought does occur to you that this could get expensive (hey... if you want a cheap hobby, get out of photography!).I've used these on a 52mm lens and on a 67mm, with filters of varying sizes up to 77mm (my new standard size). My thoughts are that they are reasonably well manufactured rings. Quite light but sturdy. Some people have written about problems with them becoming jammed together. My advice on that is to remember that these rings are just a mount for your filter... they are not holding your car engine in place. Tighten accordingly :-). I've been tightening them just to the point of resistance and have had no problems in 20+ uses. I've also read that the threads are small and hard to use. While I can see how people could become frustrated and damage the threads, if you use a reasonable degree of patience you'll be fine. My technique is to hold them gently together and turn them a little as if I was undoing the thread, then reverse to screw them together... perhaps going back and forth gently a couple of times to "seat" the threads together before I get them together.In any case, at the price of these little babies, you could afford to get a couple of sets and still be way out in front compared to the cost of buying multiple filters.I don't give out a 5 star review very easily but in this case I see no reason to hold back. There are much more expensive German made items on the market that may be more durable and quicker to thread than these, but for a guy with a family and a budget, these rings are great.

Having invested in a B+W Graduated 502 neutral density - Filter - graduated - 77 mm as well a Hoya Moose - Filter - warm circular polarizer - 72 mm, I didn't want to buy duplicates in other filter sizes. This isn't an uncommon conundrum, thus step-up rings were created. They can come in all sizes and thicknesses as well as materials, but needing a cheap and comprehensive solution, I sought out a bundle such as this.With that in mind, I ordered the Fotodiox rings, and they arrived the next day. Since I was leaving for a 2 week vacation, I threw them in my bag before giving them a try in a more controlled environment. I primarily used the 72mm - 77mm ring, which allowed my Nikon 18-200mm f/3.5-5.6 G ED-IF AF-S VR DX Zoom-Nikkor Lens to use the 77mm grad ND filter (a boon with the ever-present Norwegian sun). This combination worked without any issues, but the step-up ring seemed more inclined to want to cross threads than I'm used to. This seemed to not happen as much in subsequent installation. Some vignetting was seen, and when I added the polarizer in a stack, the corners were black until 35mm. This isn't entirely due to the step-up ring, as both filters are somewhat thick, but there definitely are thinner step up rings (for a higher cost). Going from 67mm-72mm-77mm worked, as my 67mm lens is a full frame tele lens (Nikon 70-300mm f/4.5-5.6G ED IF AF-S VR Zoom Nikkor Lens for Nikon Digital SLR Cameras), and I can imagine the somewhat thick nature of these step up rings causing an issue on DX wide angle lenses.All told, I'm glad I bought these rings, but if you're looking for the absolute best solution (especially for wide angle lenses), look elsewhere.

I was looking specifically for a 67-72mm step up ring, but the price on this product was so low, that I bought these instead. This step-up ring set is made of all metal, the threading makes attaching and detaching from the lens / filter fairly effortless. Storage is very easy, since the rings all screw together, making a tidy little cone. I have zero complaints about the filter ring set. One caveat is that you may not be able to use your lens hood while a larger filter is attached; this isn't so much a problem with the ring set, but a configuration that wasn't accounted for by the lens manufacturer. If a lens hood is an absolute requirement, then there are screw mount lens hoods on the market that will attach to these as well. With the low cost and high utility of this ring set, I would consider it a "must-have" for any photographer's toolbox.

I usually don't review products until I've used them for a while, but these rings work like a charm, screw on as smooth as butter and come with the right size for every lens I own. most other kits don't include the 58mm!!! how can you not include the size of the most popular prime lens out there!?I purchased a pretty expensive variable neutral density filter for size 77mm lenses but also want to use it on my 50mm and 60mm lenses, with this kit I'm able to do just that and no need to purchase another pricey filter to use on my smaller lenses. I use these to step-up from 58 to 77 and 62 to 77, with a few rings but it works!only issue with stacking so many rings is at the time of taking them off lol most come off together except the one actually on the lens. that one I take off after, it's not like it gets stuck or its impossible to take off just seems to have a better grip on the lens than amongst the rings. very minor issue inherent of the amount of rings stacked and do not see it as a flaw or defect on this set.I'm very happy with the performance, quality and look of this set.

Everyone wants to save money. All photographers want the best images possible. Some people buy the best, most expensive filters available.For those of us who can only agree with the first two sentences- these rings may allow allow you to handle the third. With this set of step up rings just save for the largest & best filter that you can afford, then by using these, that one filter can be adapted to fit all your lenses. I currently own six lenses ranging (in filter size) from 77mm to 58mm. These let me own fewer specialty filters, but when I need one I get the best 77mm size & now it fits all of my lenses.I own several other Fotodiox accessory type items and in addition to being fairly priced, they're well made. This is a very nice set of quality rings from them. They attach smoothly & seem to be precision-made with very good material, not to mention a very good price,

Threading was smooth and consistent. Had no issues with installing/removing from lens’ threads. These are nice to have.

I've bought many cheap versions on Ebay in the past and I finally decided to buy a whole set to cover all my bases. The difference in quality is very minimal between Fotodiox and those from overseas - about the only difference being the better quality white lettering on the rim. The threads are not buttery smooth but its acceptable for occassional use.Most people buy these step-up rings when they have multiple lenses of different thread diameters and they want to use a large filter to attach to all their lenses. You can use any sequential combination of step-up rings together to get to the desired filter size. The problem with that is when the position of the filter is too far away from the lens (ex: attaching many rings to accomodate 52mm to 77mm), you can run into the problem of severe vignetting if the lens' focal length is wide enough. For example, my 35mm prime lens using 52-55-58-62-67-72 rings with a 72mm filter will get very dark corners in the pictures. Another possible issue is when using a macro lens and the filter is again positioned away from the lens. In this case, there's greater chance of dust particles/imperfections on the filter that can affect your pictures. Another issue to keep in mind is that when using these step-up rings, your original lens cap will no longer fit on the filter, which is now oversized, and unfortunately, any lens hood that you had will no longer be able to detach/attach with a oversized filter blocking the way.With those caveats out of the way, these step-up do their job just fine, hence the 4-star rating. Ideally, step-up rings should be avoided altogther because there is no real advantage to them apart from ecomonical savings. But if it comes down to it, at the most I would use 2 to 3 rings together as my recommendation. Hope this helps.

I've had these rings for a couple years now and they work great. They can be a bit of a challenge to loosen if they're on too tight, otherwise a good product. I often use mine altogether as a lens shade when they're not required.

L'ho ordinato il 30 di maggio dagli States e ieri, 12 giugno, è arrivato integro e funzionante come da pubblicità. Come sempre, Amazon imbattibile nel suo servizio. Ovviamente prenderò, più avanti, lo step down in quanto permette di risolvere un sacco di problemi con lenti aggiuntive o filtri vari, permettendo di adattarli agli obiettivi che già si hanno.

Bom material - com roscas ok. Vale a pena!

muy muy buenos y a gran precio, me han servido muchisimo, pero son delicados y si se llegan a caer o golpear se puede fregar la rosca y ya no embonan. asi que hay que tener cuidado

Very useful