Bubble Free Epoxy Resin, 23oz Crystal Clear Resin Kit for Crafts, Jewelry,Art, Casting, DIY Art Kit with Cup, Stir Stick for Adults, Beginners

Let's resin is a good product.I love their resin.It works really great because the consistency is good easy to use. Appearance is great drives fast great for the money. Does Dry quick, it's a great product.No bubbles at all.When you mix it in the mixer, there's hardly any bubbles.I put in my bubble machine.It debubble, it's fine cures, fast hard, real quickly.Great product

I’ve worked with quite a few resins over the years, and I have to say—this one exceeded my expectations. From the moment I opened the bottle, I could tell it was going to be easy to work with. The consistency is just right—not too thick, not too runny—and it mixes beautifully with minimal bubbles (a quick torch pass takes care of the rest). What really blew me away is how crystal clear the final cure is. It looks like glass—no yellow tint, no cloudiness, just a flawless, glossy finish. Whether I’m making jewelry, coasters, or filling molds, the results are consistently professional-looking. The cure time is reasonable and gives you enough working time to adjust or add details, which I appreciate. And the fact that it’s so affordable makes it a no-brainer—perfect for both beginners and experienced crafters. Highly recommend this resin if you’re looking for quality without the high price tag. I’ll definitely be reordering!

Nice and clear. Very easy to work with.

This is by far the best resin for epoxy resin I have ever purchased. It’s easy to pour. Cure time is great. Few bubbles not many. I love using Let’s Resin products

I've been a furniture maker for years, but I'm new to resins. I thought I would try a table top project before working with a deep pour product. I did a lot of research into different resins to find a material with low toxicity and consistent results. I think this will be my product of choice! I did a number of tests with pure resin and adding some of the alcohol dyes and I was really pleased with the results right from the beginning. I did single and multi coat pours (sanding between coats) and each pour consistently hardened in just under a day (about 60 degrees in the shop). It let me embed small elements in the pour and the transitions between layers were invisible. Edges on my tabletop were clean and the resin had the right viscosity to flow and smooth out but could cling to vertical surfaces well. What I liked: 1. Mixing was easy with the 1:1 ratio of resin to hardener. 2. Very little odor. 3. Remarkably clear and durable final finish. 4. Reasonably priced and a great way to get started with the medium. Please note. Even though it's low odor, all resins must be used in very well ventilated spaces while mixing, curing and during any sanding or planing. Use proper respiratory and eye protection recommended for the process. Also gloves and protective covering should be used to avoid skin contact with uncured resin.

Okay so, this resin DOES HAVE BUBBLES! Almost all resin has bubbles, just be sure you stir them out first. It's nor is curing either and takes a full 24 hours if not longer. Also, they come with pop caps inside. Please mark A from B tops because I didn't and accidentally put the opposite on and they cured shut due to the mixup of resin parts on the lids! Unbelievable that I did that, but they aren't marked so make sure you do that! Comes with no gloves, cups, sticks nothing! Just resin. You'll have to buy those things separately. Made all kinds of little pyramid crystals, letters, bangles and more! Pro tip for the ladies with long hair, please clip it up or tie a bun. My hair fell Into the resin and I thought I would have to cut it off! If you do get it in, use a copious amount of Vaseline or any thick oil or lotion to quickly comb it out. Wash it alot and come it with a fine tooth comb constantly. Works for skin too Hope that doesn't happen to you tho, so be careful! Quality is good, easy to mix with the right stick, and dries pretty clear.

Love let's resin, there stuff is fantastic! I will buy from them again. Would love to test there products for them.

I'm a big fan of this resin. I've made a bunch of things with it. Bubbles clear out, predictable cure times. Sets beautifully clear. The pumps make it very easy to use and to get your mix right quickly and easily. I don't use resin with fire frequency, but it stands up as an ash tray very well. So the heat resistance is good enough for me.

Edit: after my initial review Let's Resin got in touch with me and offered a new bottle, which I really appreciate. They confirmed there was a mistake and have changed the volume description to match the amount actually received. I will also add that after my initial use I haven't used up the remaining resin yet and after two weeks it's still perfectly fine! No sign of crystallization, no thickening of Part A, it's still the same amazing quality as it was on the day I opened and used half of it. I am definitely going to get more of their epoxy resin. I have changed my 3 stars to 5 star review, because it's well deserved for amazing resin quality and wonderful customer service. Original review: Ok, so I will start with the fact that the resin is amazing quality. It's beautifully clear with no crystallisation. Another resin I've been getting until I tried this one would arrive cloudy (always part A), or already partially crystallised, which is why I am testing and trying more brands. This resin is bautiful, can't complain here in any way. Now here comes the issue. The size of the bottle looked suspicious to me as it was on arrival, so shouldn't be as annoyed as I am about this really, but I plan my resin work per ml specified on bottles, or pages I get them from. This resin claims to be 11.5 Oz per bottle. When using the conversion online 23 Oz is 653ml, so already not as described. Decided to plan things out to cover 640ml just in case and decided to split it in half, so half the amount on day one and half on day two. Last night I poured 3 of the 5 planned items and have less than half the amount left, as pictured. The other items would take up 20ml between them. So using simple math, there is about 590ml in these bottles, at a best guess considering I have just under half left and used 300? Oh and for those having issues with it setting and remaining sticky. Measure by ml, not by weight, as the liquid weight can vary due to viscousness of the parts (one is thicker and can be heavier). It's also better to mix bigger batches than 10-20ml at a time, as the difference in the poured liquid will be a lot less significant and will set fine. In smaller batches, even a 1ml difference either way can make a change and it won't set properly, which is also why I plan to make more than one item at a time.

Amazing product works everyone using this kit Watch Daniel on you tube so is great to have his kit

Let’s Resin is a great product

I am very happy with this resin. Since I bought it for the first time, now I always buy. I highly recommend.

You won’t get what you see on the photo - which is the particular Daniel Cooper formula - that’s what I specifically wanted. I have a feeling this old formula may not longer be available but this product photo is misleading. What arrived was what I think is the new formula and no mixers or cups! That leaves me having to adjust my sinker which is precisely what I didn’t want to do :(