DuHeSin USB C Magnetic Adapter, 24Pins Magnetic USB C Adapter with PD 100w Charge USB3.1 40Gbps Data Transfer 4K 60Hz Video Compatible for Thunderbolt 3/4 MacBook Pro/Air and More Type C Devices

Not only does this provide ease of used with using docking the Steam Deck to a Dock/HUB, but it addresses a problem that many USB ports suffer from. The constant insertion and removal of plugs weaken ports over time. With this gadget, I know I can prolong the life of my lil decky as I insert this into the USB once, and thats it. Im saving the ports life in the long time. One concern I had was that over time, the magnets would weaken. Ive been using this plugs for either a year or more now, and they still work as new now. Full video, Audio and charging. No problem. If you have a Steam Deck and a Dock, I highly reccommend this.

Pro: These work as described for both charging and data.Con: The magnet is fairly weak, so if the device gets moved around at all while it is connected the charger is likely to pop off.

I've had this for a while now and it has always worked reliably to charge my laptop. I've seen close to 100W going into the laptop and the adapter gets warm but never excessive hot. Doesn't interfere at all with PD fast charging protocols. I see the PD charger switch to 19V as it's supposed to.

Perfect for my needs, I needed something that was a breakaway for my laptop as I frequently use my laptop as my go-to-bed device. This product is perfect and will probably save me from breaking off the charger or bending it in the future. I've had it for 3-4 months thus far.UPDATE: There was some debris where the mag adapter and the main plug meets, I thought I was gentle with my cleaning with a Q-Tip, but as others have stated the plastic is VERY brittle and the plastic broke upon cleaning around the pins.

It's fine for just charging, but it will brick your usb hub. I've had 2 different hubs break not more than 2 days after using them with this adapter.

Designed really well, except the glue won't hold. Used my clamp tool to fix it, and it's really awesome now. (Clamptite Kit - CLT01-4 3/4" Stainless Steel Tool) But I couldn't expect most folks to be happy with a purchase that falls apart. More/better glue epoxy may also work.

It works as advertised, but it adds an awkward bump to the device when plugged it. It's not big, but when you aren't used to it being there, it's awkward. Also, the magnets aren't that strong. It can easily become detached without realizing it. The whole thing is big and awkward. I just went back to a standard charging cable. I know it's connected, it stays connected and you can use the device while charging w/o it constantly disconnecting.

Good, but have some pins that are already bent out of shape on the cable side of the adapter. Easy to take some tweezers and bend them back, but worth considering that you need to be very delicate with how you store and use this adapter.

デスクで使用しているipadや他にもいろいろUSBで充電するものが増えてきているのですが動くときに持っていこうとUSBを付けたり外したりが多いので助かってます。キッチリ合わせなくても磁力で引っ張ってくれるので簡単。ただメーカーが変わると接続できませんので使いだすと別のやつには簡単には変えられません。

Acheté pour protéger la prise USB C de mon casque Quest 2 car en raison d'un problème logiciel, je dois brancher et débrancher ma batterie supplémentaire à chaque utilisation d'où risque de casse de celle-ci.Pour cet usage, l'adaptateur tient bien et ne bouge pas.Par contre si vous voulez y connecter le câble USB pour relier votre Quest 2 à l'ordinateur, le câble est trop lourd et l'adaptateur ne tiendra pas en place quand vous jouerez.Mais je suis très satisfait de mon achat car mon problème de batterie est provisoirement résolu en attendant une correction du bug informatique de mon casque (Meta y travaille d'après le Occulus Store Support).

Sehr gut einwandfrei

とても使いやすくて、良いです。ケーブルの抜き差しの手間が省けるのが、良いですね。

少し磁力が期待したよりは弱いので、配線などに気を使う必要あり。ただ、これのお陰でノートPCの持ち運びがかなり理想的になりました。