Chapin 20005 Pump Sprayer, 2 Gallon, Lawn and Garden, Hand Pressurized, Anti-Clog Filter, Adjustable Spray Nozzle, Spraying Plants, Watering, Weeds, Fertilizer and Pests, Translucent

I was so tried of spraying with a spray bottle and they often broke, leaked... So I tried this out and really love it so far. It is new and I have only used it once, so I can update over time. here is what I like:Easy to useEasy to pump for pressurePressure lasted a long time before needed to pimpGood quality materialsSpray was perfect!I hope it holds up over time!!

For years I've been spraying my garden vegetable plants with hand spritzers. I apply water-diluted sulfur to my squash and melon leaves so they stay green and fresh, and water-diluted fertilizer to my tomato leaves. I need to spray both the tops and bottoms of leaves, but haven't been able to. I kept encountering the same problems with hand spritzers: spritzers that stop working all too soon; spritzers that will spray on tops of leaves, but not under leaves because they don't work when the nozzle is pointing upward; spritzers that can't fit in where I need to spray, so I can't get to the center of the plants; and spritzers that can't hold enough liquid to spray. I finally gave up and bought one of these. Before buying I could see I would be spraying with a wand, and that turned out to be ideal! I can spray in any direction (down or up) and I can reach in where I could not reach before. I'm not going back to hand spritzers!The included assembly instructions seemed confusing because they are for a number of different models, which made it difficult to figure out what I was supposed to do with this specific 1-gallon product. Turns out assembly and use are easy if you follow these steps:1) Rinse out the jug. It may contain dust and bits left over from the manufacturing process.2) Insert the filter-end (perforated cylinder end) of the white plastic tube. This will go to the bottom of the interior of the jug.3) Secure the white plastic tube you just inserted, on the outside of the jug, with the threaded-fastener that's captive and sliding on the outer hose, put there for this purpose. You're making a water-tight seal, so make sure everything is first seated right, then twist the fastener snugly in place.4) Attach the wand on the other end of the hose. You are again using a threaded-fastener that is sliding on the hose, and you are again making sure everything is first seated well before twisting snugly in place.That's it for the permanent assembly! For first-time use and to get a feel for how things work, fill the jug about 1/3 to 1/2 full with plain water. Drop the black pump into the top of the jug, with its handle on the outside. The handle is used to screw the pump into the jug so make sure the handle is down, into, and engaged in the top of the pump. Screw the pump in tightly since this has to be air-tight. Then unscrew the handle just a little, until it is loose and can be lifted up. Pump that handle to increase the pressure in the jug, and do it for longer than you might think necessary. Listen for leaking air where the pump is screwed in, and re-engage the handle into the pump to tighten it more if necessary.You want a lot of air in the jug so you can pressurize it for a lot of spraying. If you fill the jug too high there may be too little air to pressurize, and you won't be able to spray that much since not a lot will come out. You'll have to interrupt with more pumping sessions to get the pressure back up along the way. There's no law against this, it's just inconvenient. Filling half way or less makes the whole setup lighter for use, too.The wand has a handle you can squeeze, like at the gas pump, to get the spray going. Twist the end of the wand to change the shape of the spray, as you would with a garden hose.When you are done spraying, re-engage the pump handle into the pump, unscrew the pump and see and hear the pressure get released at the top of the jug around the edge of the pump.OK, you've gone through your practice session. Let's spray for real! Add water that dilutes what you are going to spray (use markings along the side of the jug to see 1-liter, 2-liters, quart, half gallon levels) and add your ingredient(s) to the water. You can shake the jug after it has been sealed and pressurized, then spray to your heart's content!Done for the day? Empty the jug and start again with plain water, then spray to clean everything out. I use this plain-water spray to water plants that could use it. Why waste the water?I am happy with my purchase, which is not something I always say. Of greatest importance? I see the effect on my plants!. Reliably getting to the undersides of leaves, and deep into bushy plants, are now easy, and really make a difference. They will for you, too.

What attracts me to this Chapin sprayer is its fully-round gasket. So many other models deliver a flat gasket that way too often dries up too soon, rendering the sprayer no longer usable. This Chapin sprayer with its rounded gasket pumps easily and holds good pressure with no leaks. Make sure you never store your pump while it is still under pressure, or for sure you will quickly flatten and ruin your gasket seal.Hey Chapin and gardeners, make note of how I am utilizing storage space by looping a few inches of the long-enough spray hose with a bit of duct tape, and then securing the hose at the bottom of the sprayer with an old bicycle inner tube, like a holster.I regularly use three different sprayers at home (roses, spiders, weeds) so utilizing storage space is essential, because sprayers with attached nozzles take up a lot of room.

I've never had a sprayer before and thought it would be nice to have one since i have trouble having the wands that come with the weed killer bottles to work consistently. I dumped the weed killer into the sprayer and wow!! It had so much more force and amount of product come out. It was awesome. I love this thing so far

The pump arrived with everything advertised. It was neatly packaged and unopened. I used it to treat for pests. Product worked very well and got the job done. It doesn’t come with a pressure relief valve but there are instructions to safely realize the pressure without wasting product. After several minutes of spraying, my hand started to fatigue from squeezing the sprayer as it isn’t the easiest handle to squeeze. Overall the product works great for the average diy consumer.