Sand Blasting Hood Cap, Canvas Shawl Sandblaster Protective Gear Mask Anti-dust Hood for Spraying Sanding Cutting, DIY Painting Woodworking Protection

This media hood works swell. Snug fit where it needs to be. Good vision and fit. You definitely will want to attach a low pressure air supply to the port provided for positive pressure to prevent fogging of the lens

its good quality. it fogs up fast. it needs airs supply. use a strong mattress pump and 3/8 tube. i had a long review and a video and amazon shot it down for who knows what reason...

Hood works great but the size leaves your nose touching the front if you have a normal to large size head.

Excellent, make sure you kook up the air hose in the back of the hood 😉

I used this for sand blasting it covers you very well but you will a external air supply to keep the shield from fogging up. It is well made and durable.

Works great if you don't want to fog up hook up air to the back barb fitting and your all set

I almost ordered a cheaper hood but I'm glad I didn't. The hood is 1st rate. I expect it to last a long time.

I bought this almost a year ago and finally had the opportunity to use it today. The elastic inside the mask around the neck works well to keep out abrasive (and air!) It has a very small connector on the back, presumably for supplied air in addition to the valve in front. For the price, it appears to be well-made. 1) As you would expect, this is HOT! It was 90 degrees F today, and it was nearly unbearable after 15 minutes or so. 2) The lens fogs up fairly quickly because there is not a lot of air exchange, but again, this must be expected in order to keep abrasive out. 3) Most importantly, the glass lens is untempered and FRAGILE. I dropped the mask in my garage from waist high, and it broke into nasty long shards - see photos. If something smacked me in the face while wearing this, there is a strong possibility of a serious injury to my face and/or loss of my eye(s). I do not think this is an exaggeration. 4) I see that they sell a plastic lens cover that can be purchased separately. I feel that this should be included, at a minimum, and the glass should be safety glass! Aren't there safety laws about something of this nature?!?! FOREWARNED IS FOREARMED!

Works.

Good quality, but you need some sort of breathing apparatus. I struggled for fresh air, would have to hold the exhaust valve to my mouth to expel CO2 and water vapor (would fog the glass easily too). There is a nipple on the back of the hood (presumably for forced fresh air) but for my application that was not possible. Eventually I had to abandon the hood in favour of a full face respirator

Good hood. Will not fog if you use it with forces air. It shows glass but mine was acrylic and shot in 2 hours.

Pretty good at keeping out particles, but always fog up on me.

cumple al inicio, te ayuda a protegerte de ciertos gases pero con el paso del tiempo cuando me lo pongo se empaña demasiado, no es posible ver, no se a que se deba pero al inicio funcionaba perfectamente