Lee PrecisionCutter and Lock Stud

Easy and works.

This is a great tool for consise repeatable quick brass trimming. Can be done with a hand held drill motor, but I prefer using a drill press. The caliber gauges must be bought separately. I just replaced mine and found that the gauge overtime will rub a little indent into the holder. Example: final brass length of a 30-06 using the 30 year old holder is 2.485 min trim length consistently. Using the new holder same gauge 2.487 inches. Both well within the 2.495 max length.

Works perfectly. Very portable you can trim your cases in front of the TV. Or beside the campfire.

Arrived on time. Exactly as described. Used to trim brass length for reloading.

I'm loading on a progressive press and do all of my case prep on it. While waiting for a specific trim die, I needed something to get me going while my backorder was filled. This inexpensive little item fit the bill and worked pretty good. I will say this, I don't know how handloaders use only these to trim brass, even chucked in a drill.Here's the process for using this:1. Thread the stop pin into your Lee cutter all the way down2. Chuck the lock stud into your drill (faster the better IMO)3. Slide a casing into the lock stud and tighten4. Start the drill, and stick the cutter/pin into your casing until you no longer feel resistance5. Remove the casing and measureAll of my cases reliably trimmed down to a 2.007" measurement. Min is typically 2.005", so that's not too bad at all.It did take me forever to get 40 cases trimmed, and this thing does toss brass shavings everywhere, so wear eye protection and maybe even a glove on your trimmer hand to protect against brass splinters. My hand was killing me after only 40 cases and this was while wearing a glove. I was really happy to receive my Dillon Rapid Trim a few days later! I imagine the cutter with the wooden ball head would be much more comfortable to use, but I'd never go back from my Dillon trimmer.But with no other options, and for less than $20 for both parts needed, this got me by and did it accurately.

This is the best brass case resizer you will find its simple and quick check it out on You Tub it is very quick if you use a wireless rechargeable drill.

So much easier to trim brass…

For no reason other than thinking that low price meant products wouldn't work, I didn't trust or buy any Lee products for a long time. This however is great for the money and it just plain works. It is not a fast way to trim cases so if you are planning on reloading a lot of a certain round you may want to spend more on something else. Lee has impressed me again for the reloader on a tight budget they are hard to beat. Make sure you screw the pin all the way in to the cutter. I used a vise and pliers and just be careful and go slow but once it is all the way in you don't have to worry about it again.

have used these cutters and lock studs on all my calibre from 243 to 45-70 with no problems at all very pleased with all of them

Does what it says on the box

Works as expected - Good quality

Very good for the money. Its a must have tool for reloading.

its perfect