K&N Cold Air Intake System: High-Flow Air Filter, Increase Performance & Acceleration: Compatible with 2012-2015 Chervolet: Camaro, 69-4523TP

Instant throttle response, distinctly noticeable gain in horsepower and that great growl/howl of a free flowing intake. What more can you ask for? Oh yeah, ease of install and GREAT looks. This intake kicks butt across the board. Id recommend running a tap in the pipe thread fitting for the oil breather fitting on the polished tube, and the screw holes for the map sensor mount, as they are very roughly cut into the otherwise flawless part. You might have to mess with the breather hose to get it to fit on the '14, as it seems too long to fit with the intake installed properly. What i did is replace the 45 degree fitting at the back of the breather where it attaches to the head, with the 90 degree fitting that is replaced by the straight one provided with the k&n kit, which I had to shorten 3/4" to make it fit right. Once this was done, the breather hose lies where it should,and doesnt pinch the hose shut above the valve cover in the back of the engine. Looks like they need to change the kit up a little for the '14 but it literally took me 20 minutes to install this system. Oh, be warned, you must trim your engine cover a bit to make it clear the tube. You will be cutting about 1/2" off the corner of one of the tabs that comes down. Easy way to do that, score it with a razor, nice and deep, making your first cut nice and straight and pretty, then snap with pliers, clean up the edge where it was scored. Cant tell its been cut.

Man I gotta say this thing is AWESOME on my 2014 Camaro LS2? I noticed a definite and dramatic difference across the board in sound, gas mileage, throttle response, and horse power, I also noticed a definite increase in air flow just from the sound under the hood, you can really hear it sucking in massive amounts of air.... Throttle response is also amazing, and the engine sounds more solid and the exhaust sound is beefier and has that muscle car growl, the Camaro is a muscle car even the V6 engine models considering they come stock with 323 horses which is about 100 HP more then the 2012 Camaro had, the sound though is the coolest part because now It doesn't just look stalky, beefy, and mean she also sounds and acts beefy and mean.... One thing I did do that wasn't in the instructions was I added a high end heat shielding material to the inside of the AirBox and to the under side and engine block side of the intake tube so it acts more like a cold air intake system now and pushes colder air into the engine, so maybe it helps even more then the standard configuration does? I just know there's a noticeable difference in my Camaro with this setup installed, next upgrade is a throttle control module and a new exhaust system to improve the HP and mileage and throttle response even more, I'm shooting for a 400 HP end result which with this engine is highly doable so by Christmas she's going to be a beast

I actually purchased this for my daughter's V6 2013 Camaro. I don't know much about cars, but I have worked on smaller stuff on mine in the past. This was crazy easy to install. I got it done in under 2 hours, but a lot of that time was running to the auto parts store, (I loaned my socket set to a friend who hadn't returned it.) As soon as I got it on, I took the car for a spin and mashed the gas. The sound is pretty amazing. I don't drive the car daily, so I couldn't immediately tell a difference in HP. My daughter, who against my advice, races from time to time and told me there is for sure a difference. I'm not knowledgeable enough on cars to figure out how much HP was added but it sounds and feels great. One thing I dislike about it is the stock engine cover from the Camaros do not fit over this intake nicely. It doesn't appear to affect performance or the fit or anything, it just has kind of an awkward look.

Oh my god. I did a bit of research before buying this and I had high expectations for the product, and this shattered them, I’ve never modded cars so I had no idea what I was doing but it took less than an hour to install. The sound that my car makes now is exactly what I’m looking for, not obnoxiously loud but just sounds awesome. Definitely added some power to it and got rid of some of the dead spots which surprised me, not to mention it just looks awesome under the hood. I would absolutely recommend this product as it makes so much of a difference for less than 300 bucks. I was going to do a cat-back exhaust but I don’t even want to anymore. You don’t know what your missing if you haven’t bought this for your V6 Camaro.