Neet® - 2 Way HDMI SPLITTER BOX 1x2 Port (1 input 2 output) - Active Amplifier -1080p Full HD - Display HD on 2 TVs - ** 3D ENABLED

I have a Virgin V+ HD box to a 40" Samsung HD TV downstairs, A Samsung 26" HD TV upstairs. Now Virgin in their infinite wisdom only put one HDMI output on my HD box, so to get around getting cable TV upstairs I used a Digisender via the Scart output of the V+ box, which was 'fine' but turn the microwave on or the Xbox on and the signal from the Digisender to the TV was interrupted, also i couldn't get the tv guide or OSD from the V+ box on the upstairs TV. So I bought a Neet 2 way HDMI splitter, 2 x 1m and 1 x 15m High-Speed Neet HDMI cables. Plugged everything in, downstairs TV worked fine, upstairs seemed fine, then noticed interference to the sound, it would intermittenly 'drop out'. So did some investigating i.e. reset the Neet box, swapped the outputs, still the same! Plugged the 15m cable directly into the V+ box to the TV upstairs, still the same! Finally, rebooted the V+ box hey presto, works perfectly. Plugged the splitter back in and now both TV's have great picture and sound. Bit of a long review I know but just thought I'd add my experience just incase anyone else had issues. One last thing, I order these products yesterday lunchtime 01/02/2011 and they arrived this morning 02/02/2011, speedy delivery, thank you. *Edit* - 26-07-2014 - Ok so I'm just adding an update to this review, after 3 and a half years, the HDMI splitter has decided it doesn't want to work any more, ligths flashing all over the place, no picture from the HD box to either upstairs or downstairs TV's, have swapped cables around to no avail. HDMI cables directly from the Cable box to both TV's work fine, so it isn't those and the one from the cable box to the splitter works fine also. *Edit* - 09/05/2015 - Seeing as I'm getting some weird responses making it look like I'm giving a negative review (which I am not, I originally gave a 5* review and that has not changed) I purchased another Unit from Neet on 28th July connected everything up and has been working as perfectly since! still 5*

When this package arrived it appeared on the small side, but on opening the box it was found that the splitter box was even smaller, but very well protected against any rough handling whilst in transit. The splitter box was connected up to the necessary cables and it functioned perfectly. What is surprising is that it is tiny; slightly larger than the space needed for the connections and LEDs. Also built in to this tiny item is an amplifier to increase the signal strength. Like other reviewers have noted, the LEDs do appear brighter than necessary, but this has been overcome by fitting it in a place where these are out of sight, otherwise electrical tape would have been used to reduce their intensity. What I have noticed is that when using either television through this splitter box there is a slight delay of a second or two before it activates itself to transmit the signal after it has been turned on using the set top box remote, but once this splitter box has been activated everything works exactly as normal; this has been mentioned just for accuracy. What I do is switch the set top box on before the television, this way the delay is reduced. This splitter box is being used with a short (one metre) HDMI cable connected to the main television, the other outlet is connected via a 20 metre cable to a second television, and what is surprising is there is no loss of picture quality to either of the televisions. All in all a wonderful piece of kit that does exactly what it claims.

Does exactly what I wanted with minimum fuss. Prompt delivery by Neet (arrived next working day). Build quality is solid with black metal casing and supplied with AC adapter. You might want to position the box out of sight because the LEDs which are illuminated when a signal is being received are VERY bright! I have a Sony AV amp and wanted to split the output to both our projector and HDTV. The cable run from the projector to the 'Neet' box is 10 metres and works very well with no discernable loss of quality to either the TV or projector. Only reason I haven't awarded 5 stars is because we have experienced signal dropout on a couple of occasions, but I suspect that the cable that is carrying the output signal from the amp is to blame(will amend to 5 if this is the case!).

Ok so you want to have HD TV on a TV in a different room to your HD Sky box, this is the item that will give you that! All you need to do is connect an I/O link box to your Sky box in the living room, and run a coax cable from the female connector on the link to say your bedroom, and connect the coax cable's other end to a Sky magic eye, which is then connected to your second TV's aerial input socket. Then using this "Neet" HDMI splitter, remove the HDMI cable that goes from your Sky box, to your main TV, and connect it to "Input" side of this splitter, then take another HDMI cable (HDMI out) from the splitter to your main TV, and then run a second HDMI cable from the second HDMI "out" connection on the splitter to your second TV, and you are finished. You can now turn on and off your Sky box and change channels from your second TV, using the I/O link, magic eye, and coax cable, and view the HD output through your second TV by using your TV remote and selecting the HDMI connection that you just connected the second HDMI cable to on the second TV. The "Neet" splitter does this extremely well, I have a 15mtr HDMI cable going from the "Neet" splitter to my bedroom TV, and the resulting HD picture is the same brilliant quality as the picture on my main TV, and saves a monthly multiroom payment to Sky! Just make sure you have 2 HDMI cables to complete the HD side of things, you do not of course get any cables with the splitter. Enjoy.

Je viens de recevoir le répartiteur neet. Je suis animateur dj généraliste et il fallait que je suis puisse alimenter en hdmi un vidéoprojecteur et un écran télé notamment pour les soirées "karaoké". Je suis donc sorti d'un ordi portable en hdmi pour arrivé sur le répartiteur neet. Je suis satisfait de ce produit qui a fonctionné immédiatement et sans problème. Il faut prévoir 3 câbles hdmi mal (un de l'ordi-portable au répartiteur puis les deux autres pour alimenter le vidéo projecteur et l'écran télé). Longueur total pour mon installation 6 mètres sans perte de signal. GB

Livraison prevu ce vendredi mais recu hier. Bravo pour la rapiditee. En ce qui concerce le produit, je l ai juste branche hier soir sans regarder un film ou jouer a la PS3. Tout ce que ne peut dire c est qu il prend bien en comptee 1080. Bref je pense ne paz etre decu du produit. Juste un point negatif comme deja dit dans un autre commentaire. Il est vrai que les leds rouge sont un peu trop forte.

j'ai eu un peu peur au premier branchement car je n'avais pas le son. C'était OK après débranchement et rebranchement (peut-être fallait-il attendre un peu la "mise en chauffe" du boitier). config : un HDD SAMSUNG BD-F8900 sur 2 TV SAMSUNG (1 avec câble 1,5 m + 1 avec câble 5 m) boitier alimenté sous tension secteur obligatoirement (essai avec le câble 1,5 m NOK) point > 0 : fait ce qu'on lui demande en toute simplicité point sensible : comme déjà signalé dans un commentaire, les leds sont trop lumineuses (dans mon cas le boitier est caché, mais pour d'autre cela peut être gênant). point < 0 : les raccordement HDMI me semblent "légers" : les fiches mâles n'entrent pas entièrement : à suivre dans le temps Mais globalement, pour 29,95€, je suis tout de même très satisfait

Couplé avec Hub Logitech Harmony, HDMI Splitter est la seconde roue du carrosse: indispensable!..

Produit HS apres 4 ou 5 ans d'utilisation, il faudrait pouvoir le mettre sous tension que lorsqu'on en à l'utilité, c'est à dire que le flux sois préserve sur un seul ecran même hors tension. Sinon a bien fait son job jusque maintenant.