Silverline Cable Pulley Set 180kg (633957)

If you have ever manhandled fit 6ft double sided feather board fence panels into existing concrete posts on uneven ground then you will know how heavy and unsafe they can be. I bought this pulley set to use with a wooden frame arrangement to hoist the panels into position and they worked a treat without the need for a second person. I was able to control the lift safely with the pulley set and did not feel at any time that they would 'give up'. They did twist a little when not under load and the rope is not perfect but for the cost of purchase these really are minor points. If you were doing more repetitive work this might come into play but it is purely down to the rope and you could just change it if necessary. I do not know if anyone else has pointed this out but the way they are designed the shackles can be removed are they are attached via a hinged plate arrangement. Great little bit of kit!!!

I bought this because it was such great value and it really was (was!) a pretty decent pulley for light-to-medium use but I did manage to completely destroy it by using it to help pull out/over some tree stumps in my garden, jacking the smaller stumps against the largest one (which I then got out using a mattock - much harder work). What really killed it was tugging violently with all my weight again and again, so that eventually the plastic pulley wheels melted. A lot of heat is generated through the friction between pulley and nylon rope, so go slowly if you're exerting a lot of force! Made a very tough job much easier though, and it managed several stumps before it became completely useless, saving me a lot of time and effort, so I still reckon it was a good buy. It appears to come with a 'lifetime guarantee' but I didn't try claiming after the abuse I gave it. I'd definitely recommend it for occasional normal use like 'lifting heavy things' - it's cheap, very compact and useful to have around. I'll probably buy a replacement when I can justify it! See the review by 'Nonnymoose' (14 Jan 2012) for good instructions on how to modify it to increase the mechanical advantage from 6 to 7 by making better use of the fourth pulley.

Bought to assist in the removal of a length of 4" cast iron soil pipe that had to stay vertical to avoid damaging the clay pipe it was sitting in. Worked perfectly. It is not the easiest thing to use however, as the very light pulleys will happily twist themselves and tangle the cords between them at every opportunity until under tension - I recommend using something like an old wire coat-hanger bent into a square or piece of wood with a couple of nails in it to hold the pulleys apart until the hoist is about to be used. Once under load the thing works brilliantly, enabling a heavy load to be lifted easily and under control but be aware that there is no locking system on the cord so you need to keep a grip on it at all times until the load is finally lowered.

A block and tackle is a simple device and really works. I needed the extra 'lift' to get heavy items (20-30 kgs) into the loft space and this has basically solved the problem. Having fixed the top pulley to a well bolted-in hook the pulleys can then be pulled down to about 3 metres - ample for most tasks. The unit is quite well made and is advertised as capable of lifting 180 kgs - I wouldn't like to try that though. At the price this is a bargain however I do have one criticism; the rope supplied (about 20m) is of the polypropylene twisted type and will get itself in a tangle at the first opportunity .The pulleys then become tangled and friction between the ropes makes lifting and lowering very difficult. Maybe worth while investing in better rope for the pulleys if you intend to use this a lot. I'm going to see how I get on.

I bought this pulley set to assist in the removal of seven 2.1m (L) x 100mm section concrete posts that had been holding my back garden fence up for more than 36 years. A modern day slotted post weighs in the region of 45kg and with the attached concrete foundations, the total must have been close to 100kg. Once each post had been broken free of the soil by means of two hydraulic bottle jacks, Silverline 427711 2 Tonne Hydraulic Bottle Jack ; I was able to lift the post clear of the hole, using the pulley set tied to the top rungs of an aluminium ladder, arranged over the hole forming an `A' frame. The pulley set performed beautifully, although Health and Safety might have had something to say about my `A' frame (needs another person to hold the ladder). The pulley set comes with two elongated links, which can be used to facilitate attachment of chain, rope etc. to the pulley fittings. Tips - when lifting heavy items, as the rope is too slim for hands to grip directly, it can be wrapped around a suitable piece of wood to use as a handle. Also when pulling the top and bottom pulley sets back together after use, it helps to keep them under a small amount of tension to prevent tangles occurring. This is an incredibly useful piece of equipment at a very reasonable price.

Tyvärr för rangligt och linan smiter emellan linhjulen och konstruktionen. Nej inge bra!

Der Flaschenzug ist solide aufgebaut. Alle Teile des Zuges nebst Befestigungsmaterial und Seil sehen so aus, als könnten Sie auch große Belastungen vertragen. Eine zerstörungsfreie Prüfung ist mir nicht möglich. Die Funktion ist einwandfrei, auch die Seile verheddern sich nicht. Lediglich die erste "Entwirrung" aus der Verpackung braucht etwas Nachdenken.

Prodotto ben fatto e marchiato CE. Peso dei due bozzelli senza fune gr. 380. Bozzello superiore con 3 pulegge a gola in plastica stampata con diametro esterno di 37 mm. ed interno di 29 mm., foro da 6,5 e raggio interno della gola da 1,5 mm. e bozzello inferiore con 4 pulegge con uguale fattura. Lunghezza dei bozzelli (escluso gancio di attacco) mm. 110. Gancio di attacco (superiore ed inferiore) in tondino sagomato da 3,5 mm. lungo mm. 59 a largo 27. Questo gancio porta certamente il peso dichiarato di 180 Kg. però la saldatura di unione è molto misera e quindi consiglierei o di riprenderla oppure di usare un gancio da commercio più sicuro, considerando che il foro di alloggiamento è di 10 mm. Anche la fune di sollevamento è adatta allo scopo essendo il carico ripartito su 6 funi (Kg. 30 per fune), comunque sostituibile con una cima da surfing da 3 mm. con portata di 170 Kg. e costo approssimativo di 0,20 €/mt. Per quanto riguarda il fermo fune lo trovo giustamente dimensionato essendo costruito con un blocchetto di plastica pieno con spessore di 7,5 mm. Le viti del bozzello che tengono i supporti per i ganci di attacco sono leggermente corte, perchè non fuoriescono per almeno 2/3 mm. dal dado autobloccante. Consiglio, se si vuole conservare la mobilità dell'attacco, o di sostituire il dado con uno più basso oppure le viti con lunghezza superiore.

Compre estas poleas para poder colgar el remolque de la moto en la pared del trastero, el remolque pesará sobre unos 80 Kg, lo levanté sin problemas, al verlo pense que me cortaria las manos con el esfuerzo, pero no, las poleas hacen su funcion perfectamente y dividen bastante bien el peso para que la cuerda de tiro no soporte demasiada presion. Por ese precio la verdad es que me merecia la pena probarlo y el resultado ha sido bueno. Incluso mejor de lo esperado. La fuerza de tiro con 80 kg es como si tirase de unos 15 Kg. Relacion 6 a 1.

J'ai utilisé ce treuil à poulies pour soulever une charge de 40kg. Il fait bien son travail et la charge est facile à lever. La corde datant fine, il est prudent de porter des gants de travail. C'est un très bon article au regard de son prix.