Thermopad Minus Pad 8

Great thermal paste with really solid performance — dropped my CPU temps by a few degrees straight away compared to the stock paste. It’s easy to apply, has a nice smooth consistency, and feels high quality. Definitely good if you care about keeping temps low or running a more powerful setup. Only downside is it’s a bit pricey and might not last quite as long as some cheaper pastes under heavy use, but overall it does exactly what you’d expect and works really well.

Great quality and very easy to apply. I used it when re‑pasting a 2070 Ti, and it made an immediate difference. Temperatures dropped enough to stop the fans constantly spinning up.

This Thermal Grizzly Kryonaut paste is truly excellent. I used it to repaste an RTX 3080 GPU, and the results have been fantastic. It successfully helped keep temperatures below 70°C even when the card is running at its full 330W limit, which is a significant improvement. The paste itself was thick and easy to apply, and it appears to be very durable, maintaining its performance over time. Considering the thermal improvements and the quality of the product, it offers great value for anyone looking to optimize their CPU, GPU, or console thermals. Highly recommended for demanding applications. If misapplying it's easy enough to remove with a 90%+ isopropyl alcohol solution.

Literally the perfect amount for a single GPU or CPU. Squirt it on, level it out a bit and slap a cooler on top, dead simple. Temps are always good with this paste, consistency is perfect, works with basically any GPU/CPU and cooler combo.

For a long time, Thermal Grizzly Kryonaut was the undisputed king of thermal pastes for enthusiasts. I used it on my old, very hot-running Intel 7700K, and it worked very well, taming its temperatures better than anything else at the time. Based on that experience, it was my automatic choice when building a new PC. However, technology moves on. After upgrading to a 9800X3D, I was noticing high temps under load that seemed unusual. I decided to investigate, and after reading online that Kryonaut, while still good, has now been beaten by many other pastes, I decided to switch. I replaced the Kryonaut with Corsair's XTM70, and the results were immediate and undeniable. There was a noticeable difference in temperature, with a drop of several degrees under the exact same stress tests.

I just received a replacement mini PC under warranty which in retrospect was a cooling problem caused by a slightly faulty fan from the start. I decided to check the replacement for heat this time and discovered that 2 of the cores were over 90C and about 20C above the rest on average. I applied this grease and the problem has entirely vanished and all temps are now lower too. The same 2 cores are still the hottest (marginally) but effectively all cores are now in equilibrium. OK, maybe the original paste on the mini PC was poor quality and/or misapplied but neither was obvious. What is obvious is that this "extreme" paste is indeed "extremely" effective! :D

Excellent thermal paste. Very easy to use. Once applied, lasts a very long time in my experience. Bit expensive, but definitely worth it in the long run!

Note: Do a very good research on thermal pastes before starting! Item arrived very fast, less than 24 hours and came in its small black Thermal Grizzly package along with a plastic spatula. The paste seems a bit enlarged in the pictures but it is actually very small. Just 1 gram of that paste, still enough for 4-5 applications. Use only 1 pea size drop on both cpu and gpu, dont put on the heatsink. After you put the heatsink back on the paste will spread equally. There is no downside of putting a little more so if you are in doubt, go for another tiny drop because if you put less than a certain amount, it won't take effect. After you put everything back together, the temperature change is immediate. I am using a laptop, msi ge73 7rf, gtx 1070 and i7 7700HQ. The idle temps were 60 for both cpu and gpu, the full load temps were 95 for cpu and 80 for gpu. The laptop would get extremely hot and it would burn your finger if you touch the top of the keyboard. The heat would reach to the WASD keys causing uncomfortable feeling. There were 25-30% thermal throttling during full load. After applying the Kryonaut paste, the temperatures dropped 10 to 15 degrees. Now, the idle is 50 for both and full load is 83-80 for cpu and 75 for gpu. I tried overclocking the gpu after seeing such temperature drop and that way the temps only increased 3 degress. I used a heater to heat the room and fan cooler to increase airflow. With fans on full speed and room heated, the temps didn't go above 90 for cpu and 82 for gpu even when overclocked. The results are shocking, even with overclocking and warm environment, the temperatures were below stock temperatures. This stuff works and it is much safer and easier to apply than liquid metal. Go for this if you don't want any stress and headache just for extra few degrees less.

VERY GOOD PRODUCT .MY i9-14th GENERATION ON AIR COOLER WORKS GREAT. MAXIMUM TEMP ON 2 CORES TOUCHED 72 Deg C

Ich habe die Thermal Grizzly Kryonaut zusammen mit meiner neuen ARCTIC Liquid Freezer III Pro 240 A-RGB für einen Ryzen 7 7700 verwendet. Wer Wert auf niedrige Temperaturen legt, kommt an dieser Paste eigentlich kaum vorbei. Anwendung & Konsistenz: Ich habe die klassische Punkt-Methode angewendet. Die Paste lässt sich am Anfang sehr gut dosieren. Ein kleiner Tipp: Wenn die Spritze fast leer ist, wird es etwas kniffliger, da die Paste eine recht hohe Viskosität hat und dann gerne mal an der Tube "kleben" bleibt. Mit ein bisschen Geduld ist das aber kein Problem. Ein Spatel liegt übrigens bei, falls man sie lieber verstreichen möchte – ich habe ihn jedoch nicht benötigt. Ergiebigkeit: Die 1-Gramm-Spritze ist zwar klein, aber ergiebiger als man denkt. Ich konnte damit zweimal eine CPU bestreichen und habe immer noch einen kleinen Rest als Reserve übrig. Für den normalen Gebrauch reicht diese Größe also völlig aus. Performance: In Kombination mit einem guten Kühler liefert die Kryonaut ab. Ich habe im Vergleich zu meinem alten Setup (Luftkühler + Standardpaste) massive Temperaturverbesserungen erzielt. Die Paste trägt definitiv ihren Teil dazu bei, dass die Hitze schnell und effizient an den Kühler abgegeben wird. Fazit: Ja, die Kryonaut ist etwas teurer als herkömmliche Pasten, aber für mich ist der Aufpreis absolut gerechtfertigt. Wer ein System für Gaming oder Overclocking baut, sollte an den paar Euro für die Wärmeleitpaste nicht sparen. Klare Empfehlung!

super produit

صارله ٤ شهور والى الان نفس الاداء كانت توصل حرارة المعالج عندي ١٠٠ حاليا حول ال٨٥ واداء ثابت من اول ماحطيته الى الحين (٤ شهور)

Detta är den i särklass bästa kylpastan jag använt. Sänkte temperaturen ett par grader mer än motsvarande kylpasta som köpts från Inet. Rekommenderas.