Is this a 12v demand pump?

Yes. It pumps up to its pressure (i believe it is 50psi) then shuts off until the demand is created again.

How many gal. per min.& how much pressure does it produce?

Made by Flojet Model#03526144 / R3526144* 12 volt - You can not put this in a house or plug into a wall - 110/115/220 volt will damage the unit. 4.4 Amp Draw @ 10 PSI 7.5 Amp Draw @ 50 PSI 2.9 Flow GPM 50 Pressure Switch Max PSI Built-in Bypass: Less Pulsation Self-priming up to 9 feet suction lift Pump able to run dry without damage Soft Noise Absorbing Mounts Snap–in Port Fittings Can Not be used with accumulator tank Corrosion Resistant Materials Meets ISO 8846 (Ignition protection) Includes a Flojet Strainer Model # 01740300Specifications: 12 volt - You can not put this in a house or plug into a wall - 110/115/220 volt will damage the unit. 4.4 Amp Draw @ 10 PSI 7.5 Amp Draw @ 50 PSI 2.9 Flow GPM 50 Pressure Switch Max PSI Motor: Permanent Magnet, Ball Bearing Pump: Three chamber diaphragm design Totally Enclosed. CE Models are fully suppressed. CAUTION: Pump surface will get hot to the touch if operated for extended periods of time under pressurized conditions. Pump will shut off to cool down. These pumps are for fresh water not pond, lake, sea water or gray water. **CE fully suppressed models are identified by a prefix “R” and a CE mark on the label.(i.e. R3626144). Self Declaration Of Conformance (SDOC) is available upon request.

It is designed for use in campers as the water pump for the whole water system. The instructions include directions on sanitizing and winterizing. These instructions direct the use of non-toxic antifreeze for potable water systems. There is no mention of "food grade" in any of the materials supplied with the unit. I feel safe using it to pump potable water.

I'm installing 2 filters before the pump.Should I put the filters before or after the pump? I'm getting a lot of air at the faucets.

TROUBLESHOOTINGFailure to Prime - Motor operates, but no pump discharge• Restricted intake or discharge line• Air leak in intake line• Debris in pump• Punctured pump diaphragm (pump leaks)• Crack in pump housingMotor falls to turn on• Loose wiring connection• Pump circuit has no power• Blown fuse• Pressure switch failure• Defective motorPulsating Flow• Restricted pump delivery. Check discharge lines, fittingsand valves for clogging or undersizingPump Fails to Turn Off After All Fixtures Are Closed• Empty water tank• Insufficient voltage to pump (low battery)• Punctured pump diaphragm (pump leaks)• Discharge line leak• Defective pressure switchLow Flow and Pressure• Air leak at pump intake• Accumulation of debris inside pump and plumbing• Worn pump bearing (excessive noise)• Punctured pump diaphragm (pump leaks)• Defective motor

Manufacturer	Flojet
Part Number	03526144A
Product Dimensions	22.86 x 10.16 x 10.16 cm; 1.18 kg
Item model number	03526144A
Colour	White
Style	Diaphragm
Material	Alloy Steel
Power Source	Battery Powered
Voltage	12 Volts
Item Package Quantity	1
Flow rate	2.9 Gallons Per Minute
Certification	certified frustration-free
Included Components	Water Pump
Batteries included?	No
Batteries Required?	No
Item Weight	1.18 kg

Flojet 3526-144A Water System Pump, 3.4 Bar, 11 LpM. Triplex

التفاصيل

الوصف

المواصفات

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة