HNNHOME Rubber Plastic Bath Shower Screen Seal Strip for 4-6mm Glass Door Up to 22mm Gap (Straight)

Purchased as a like for like replacement on a Merlyn shower screen. The seal strip arrived well protected and very importantly, it's dimensions as listed were accurate. Both rigid and flexible where required, the seal was easy to cut and install. Fit wise it was perfect and provides the seal along the top of the bath that was needed. Compared to the OEM version, this is very good value for money.

Perfect fit. Easy to cut. Felt secure. Will wait to see how it works over time

excellent product

Fits perfect

Did the job brilliantly Not easy to cut through thick plastic though to adjust length or allow thin plastic seal to extend between panels

This works well, but we found the instructions difficult to understand and fitting also wasn't straightforward

It does the job of stopping the gap between door and bathtop. Just one drawback- the tube which forms part of the seal , needs to be sealed at each end with a close fitting plug. To stop water entering and over time encouraging mould to develop which is difficult to remove and is unsightly and invasive to other parts of the seal. Also unhygienic. Otherwise it does the job very well. R. B.

After 5 years the seal on our Ideal Standard, 5mm, curved glass shower screen had discoloured. It was very clean but had become yellow with age - there is nothing that can get rid of this colouring as it is not a surface problem -the rubber has effectively changed colour. To replace with an original seal was going to cost nearly £40. (The gap between the screen and the bath runs from about 16mm down to 10mm). I spent much time searching for a cheaper replacement and found many like this one at about £5 and another (Uniblade) at £22. There is a big difference in price here, even though the Uniblade seal is UK made, comes in two parts and seems a more 'high tech' product. I was wanting to pay £5 but felt that the alternative had to be a better seal. After much deliberation I could not bring myself to pay £22 for a simple seal and therefore chanced a fiver on this one, based on good reviews. The seal arrived very quickly and packed into a neat plastic delivery tube. There were no instructions at all - however it is questionable whether this little job really needs any. It took seconds to pull off the old seal, minutes to clean the glass and about two minutes to fit and trim the new one. There was NO need to heat or soak this flexible seal. It is a good tight fit onto the glass and needs to be pushed on from underneath rather than trying to slide it from one end to the other. It trims off easily with a sharp craft knife. Due to the tight fit onto the glass I would not recommend this job to elderly folk as a degree of strength is needed. It is vital that the seal is pushed well into the upright frame on the screen before trimming, otherwise there is a risk of cutting it too short. So within minutes we now have a well fitting, inexpensive and clear seal. Even if I have to replace this every year or so it is still a good deal cheaper than an original. I will now purchase another as a spare and I'm pleased I took a risk not buying the Uniblade seal. When in use there are no leaks, so nothing to worry about there either. The attached photos show the old seal, the screen without a seal, the untrimmed new seal, and the finished job.

Parfait, se glisse parfaitement sous la vitre et empêche bien l’eau de passer

Le alette dovrebbero essere più flessibili e morbide per facilitare l'apertura dell'anta della doccia. Comunque funzionano bene!

super teil , auf die Länge abschneiden und fertig

Fácil de instalar. La curva predefinida no fue suficiente pero se pudo forzar siguiendo la curva de la puerta abatible

mooi en goede product