TDRRICH 1/2HP water pressure booster pump with Smart Controller for whole house，Self-priming Jet Transfer Pump Pressure Switch Automatic System 110v AC for Lawn Garden Sprinkler Irrigation

Works great installed easy, first time on it was a little loud, concerned me, but it worked the sound out, maybe an air pocket or something

Se dañó la parte de la bomba nomas duró un Año y medio venden repuestos para este artículo???

There are absolutely no instructions telling you what is the intake and exit. It comes with quite a few different pieces but you have to guess where they go! Frustrating a company can't give you enough information on hot to install!

I got this pressure pump to try because our house has very low water pressure. I am not a plumber, so I just installed it how I thought it would work best for me, as there are no videos on YouTube that I could find. The pump itself does seem to be sturdily built and the control panel hasn't had any problems, yet. The cost of this pump is very low compared to others, which could make it attractive to buyers. After installation, the water pressure in the house has increased and I'll take what I can get at this point. However, there were some difficulties that I am going to address if you are going to install it in a house for boosted water pressure, as I did. 1. The water outlet on the top of the pump control panel is made with plastic threads for a 1" outlet. I have a 1" threaded copper adapter which oddly did not fit the thread pattern on the plastic very well. It kept wanting to cross thread. It wouldn't fully thread and so I was amazed that with a lot of Teflon tape that there were no leaks. Without the booster, my water pressure was about 15 PSI and with it on, it cranks it up to about 70 PSI. This is very nice for taking a shower now, but not so nice if you are doing dishes in the sink as it seems to get everywhere now. 2. The booster pump will activate automatically when pressure drops below 1.5 BAR on my model ( which is around 15 PSI). After the pump shuts off and the pressure is at 70 PSI, it takes about a full 10 seconds running the water in my house before the pump will activate again, which absolutely does not equate to instant water pressure. There are better brands/models out there for this feature but they also can cost between $500-$1200 dollars. 3. The directions say that the starting pressure for the pump is preset at 1.5 BAR for the JETS-60 model and can only be increased to a maximum of 2.2 BAR by rotating the adjustment screw in the back of the control panel. I tried adjusting it to the maximum, but noticed that regardless of how far it was turned to increase the starting pressure it would not activate any higher than 1.5 BAR. If I turned it all the way down, it would activate around 1.3 BAR. So the adjustment screw in my opinion is a worthless feature. There is no way to adjust the output pressure of the pump at all, so you are stuck with the 70 PSI max pressure. 4. Noisy! I have the pump installed in the basement and can still hear it all over my 2200 square foot house. It is not a quiet motor by any means. 5. There are no online guides or videos that are helpful. You are on your own if you want to install this yourself. In conclusion, if this pump failed and I had to get another one I would not buy another for the house. I would spend the extra money on a pump that had some adjustment and a faster response to water pressure drop. If you are using it for a sprinkler system or a purpose other than increasing water pressure in the house, it would be just fine, I'm sure.

This pump works well, is powerful, and is pretty quiet compared to some others that I have. What would make this pump awesome is if all the fittings were brass instead of a mixture of metal and/or plastic fittings. It is a personal preference, but I’m not a big fan of that, especially if it’s something like this that has the potential of being moved a lot or taken on and off. It’s not something major, but I do think it’s worth mentioning. Overall, I think this is a good pump that isn’t too loud and should last.

This water pressure pump has been a huge help for my lawn watering line. I was pleasantly surprised by how quiet this pump is, considering the power it packs. I've set it up with a DIY sprinkler system for my yard, and although the instructions weren't very clear, there are plenty of helpful YouTube tutorials that guide you through the setup process. Any minor issues I encountered were easily resolved by a search. The pump's sturdiness definitely give me confidence in it having a long run time, with its metal casing adding a level of robustness that promises longevity. The automatic system is a massive time-saver, eliminating the need for daily manual operation. I haven't encountered any problems with this pump, and I highly recommend it to anyone seeking a convenient and efficient irrigation solution.

We got this to boost the flow out of our irrigation sprinklers, and it does a good job. Pressure was a problem because some are at the end of pretty long hose runs. It is good for our use but would not be useful to boost the pressure to a whole house. Its max working pressure is too low for that. FYI, 1 Bar is equal to about 14 PSI.

The pump is small and powerful. It has 1" inlet and outlet and includes fittings. The key to the booster is the controller which comes pre-wired. After filling the pump with water it starts pumping.