H6

I couldn’t pass this case up after I saw it. My AMD Athlon X2 needs a lot of room to breathe and this case has it! I actually wanted to put my old setup and first built gaming pc into a really nice case and display it. This case was perfect for it. I’m tempted to get another one to house my main pc. No issues with quality or shipping. Panels are easy to remove. Good cable management. Plenty of space for fans. I did have to drill a few holes for the old sata hard-drive, no biggie though. Only thing was I needed another half inch or so in height to run cables out of the bottom, but I made it work. I ran cables before setting the mobo down. I saw others had this issue before I bought the case, it wasn’t a dealbreaker. Also note, the case doesn’t come with fans. That was okay for me, but maybe not for everyone. Great case, I’d recommend it.

This case was definitely an upgrade for me. I came from a small case with about 4 fans in it, but I was able to fit 7 fans along with an additional AIO in this. Great case for the money, easy to build in and haven’t had any issues. Great buy!

So the case was originally listed to come with 10 RGB fans, which is one of the reasons I bought it. They changed the description after I bought it and after I read one other review that said it didn't actually come with them. This isn't a big deal to me, I really liked the design of the case and was going to buy Corsair fans anyway, just like that I didn't have to right away while building my NEW PC(one less starting cost). the case does seem that it will have REALLY good air flow once, max 240mm AIO on the back does kind of suck, but you can run a 360mm on top and bottom, which is what I am doing anyways. Cable management to the motherboard isn't the best. There's 2 slots at the bottom of the case one isn't big enough to route the USB plug through at all and the other is further back and the only one at the bottom that you can actually fit the USB plug in and it makes it harder to do clean cable management. I like the power button on it. Downfall is that it only has 1 USB slot and 1 type-c slot on the case. So hopefully your motherboard has more than you needed. SATA and HDD mounts in the back of the case right under where the PSU is, you can take that out and it does help with routing any cables you need to if you put the mother board in 1st(I STRONGLY SUGGEST ROUTING ANY CABLES PRIOR, MAKES IT EASIER. I DIDN'T!!). Dust covers aren't really that great, they're not a fine mesh the holes are slightly large for a dust cover. One of the things I do like about this case is that I want to put a 5" monitor screen in it to show temps of everything and with the number of fans that you can actually put in this case. It frees up the rear fan spot to do that with it. So overall, If you have want a decent, buy it. If you don't want to buy a lot of fans that don't come with the case, don't buy it. I'm still happy with my purchase as of right now. I haven't finished building my new PC as of yet though and still might change my mind about keeping this case, as I REALLY like the Hyte Y60 and almost bought it instead because it has the vertical GPU mounting ability that this one doesn't. EDIT: I have to add on that taking the glass off the case is a slight pain. I like the fact that it's a tight fit but while you're building and you put t he glass back on to cover everything up, doing upgrades or just cleaning, it's slightly harder to take the glass off to do so.

Case isn't terrible. But also not anything amazing. It's a decent quality case for the price. Big down side is back pcie openings for cards are one time breakable slots. Once broken off there is no replacements provided to fill an empty slot and you will have to buy them and the screw. But if you don't plan on ever using anything but the graphics card you will be fine.

So, I don't dislike this case. Actually, Its a lot bigger then I had expected it to be. However, I didn't fully read the headline for it, and figured it came with the Fans already installed. Now you might be saying, well it does say No fans in title. Yes you are right. That's from me not reading it fully. I received this case the other day (03-28-23) after unboxing it, I figured there were gonna be some scratches or some ding on the case, to my surprise there wasn't. Its a very nice looking case, I loved the fact it has a door that swings open instead of the standard screws that hold the glass on the front. I'm gonna be very excited to do this build, it says the case supports water cooled. I've never done that before but I think its time I start expanding my builds out alittle instead of the same old same old. If i remember to, ill try to update a month or two down the road after is been used with proper equipment installed. Stay tuned!

Let me start off with the Good things about this case. It looks AMAZING! Thats where the good things end... This has got to be the worst case to build in and has so many flaws to it. First thing I noticed when I first got the case was it has a swinging door to open, which is okay? Personally not a fan and wish I knew before I bought it and maybe some people will like it. It is removable too. 2nd thing I notice is there is ZERO dust filters in this case, which to me is absurd. I also noticed that this case is different from other reviewers which is totally odd? Build Quality is okay, it's Not good but it's also not bad. My case only holds 9 fans, you can not put a 10th fan in the back unless you want to drill holes in the case. The GPU brackets are the type you break off and can not re-screw. Now the absolute worst part of this case, building in it. IVE NEVER SEEN A CASE WHERE YOU HAVE TO INSTALL THE HARD DRIVE BEFORE YOU PUT THE MOTHERBOARD IN. The screws to put the hard drive in is right behind the motherboard and Ive had to at-least take the motherboard off 3 times because the way you mount this hard-drive, the connectors are FACING THE WALL, making it impossible to plug in the SATA power cable without installing it in with the hard-drive! Cable managing in the case is terrible. You WILL have a rats nest no matter how hard you cable manage. Theres also a extra mount for sdd's that right in the middle of where you would cable manage and it's an absolute pain. Overall I give it like a 5/10 because the looks make up for a day of headache. Out of all the PC builds Ive done, this one build took me 10+ hours to do where it would normally take me at-least hours. If you are looking for a Lian-li type case, Id personally look somewhere else or just spend the extra $50. Trust me, I wish I did...

This is a big case that is easy to work inside of. It has plenty of space for mounting fans and radiators, plenty of room for cable management in the back, and even has a cage for mounting HDDs or SATA SSDs and it sits just above the PSU. The PSU sits behind the motherboard with the fan intake positioned to the outside of the case. The dust cover on top is magnetic and the bottom dust cover slides into notches to hold it. The side of the case towards the front where you wouldn't intake fans has no dust cover at all, so I'd recommend getting a magnetic dust cover for that to attach to the outside. I bought a set of 4 for 10 bucks that work great. No real issues with this case.

They could improve a lot of things with that all space that the case offers, atx motherboard’s haven’t been easy to fit, where we connect all the things we need, mouse, keyboard’s, headsets and etc… I have to damage a little bit, so it can fit my motherboard! Other than that, the case looks good, it gave a good impression, looks nice too, but the big thing is the space, it gotta a lot to improve.

hallo Alles gut gelaufen gerne wieder!!!!!!!!!!!!!!!!!!!!!!!! freundliche grüsse

Made with cheap materials, hard to build with, doesnt fit motherboard , cheap power button, hollow, bad airflow, 1/10 overall i had to switch my case because this one sucked so badly returned

This is a good enough case. Not enough room at bottom with atx motherboard and if you have fans installed too. But overall i like it. I did the build with 10 case fans and deepcool AK620 cpu cooler. Temps are always good. I would recommend it.

PRO: molto spazioso / Cable managment comodo / Solido / molto compatto rispetto ad altri case dual chamber CONTRO : manca un filtro sul pannello laterale per le ventole intake / con una scheda ATX, i pin più bassi della scheda interferiscono con le ventole intake nel pannello inferiore (non ho potuto collegare il cavo della USB-C presente sul case perchè interferiva con le ventole (occorrono ventole slim)

To much money don't really like it