HUANYANG VFD Variable Frequency Drive,1 or 3 Phase Input, 3 Phase 0-400HZ Output, 2.2kW 3HP 220V 10A for Motor Speed Control,FC Series

Good VFD for the price. Also if you are using the 0-10V signal to drive the rpm be sure to change parameter P00.06 to a 2 as well. Took me awhile to find this. I think you have to put parameter P00.07 to a 0 to get it to work first.

The VFD arrived safely, the packaging was excellent. The hook-up/wiring was easy and painless. I'm using the VFD to power a 1960's era, 5hp DeWalt radial arm saw. There is an initial learning curve to the operation of the VFD.

Fantastic value! I've used this to drive the 3phase 3hp motor on my Bridgeport mill. It's a little bit of a learning curve navigating the menu and setting all of the parameters, but once you read through the instructions carefully enough it's not bad and anyone can set up motor parameters if your motor has a spec plate on it. All of the specs and features available are amazing as well for supporting external switches and what not. Wouldn't hesitate at all to get another if it was needed for another machine down the line, in fact I would try to get this one or appropriately sized brother to it for my next machine that will need phase conversion.

Works great

First of all I really like the device. It is well engineered, has Modbus out of the box, can run 3phase motor on 2phase (split phase) utility power. However the size stated is too optimistic. It is marketed as 5HP, in picture #5 it says 4.7HP max, however it is able to run my 3HP motor for 4-5 minutes and then shutdowns with "Uv", which is "DC bus undervoltage" error and a very strong smell of BURN PLASTIC. What I think (speculation) that it can run 4.7HP motor only on 3 phase AC source, not 2 phase. In my understanding AC-DC rectifier bridge overheats, DC bus voltage drops, VFD shuts down. So do your own reaserch! It is not capable of running 3HP motor on 240V split-phase for more than 4-5 minutes without overheating and shutting down. I would return it and get a bigger one from the same manufacturer. I hope 10HP VFD would be capable of running 3HP motor.

I bought this and the ATO 3000gk. This was twice the size but is hands down the better vfd for half the price. I'm very happy with it. I actually like the bigger robust vfd with the bigger screen and the bigger buttons. Overall it's a cleaner looking unit. Doesn't look so cheap like the other one I paid more money for. I'm using it on my two horsepower. Three-phase Lennox true edge

Why did you pick this product vs others?: Bought this to replace a much older VFD that I probably overloaded and let the magic smoke out! The manuals on these have gotten light years better compared to 8 years ago but I did have some issues figuring out accessing the 3 different levels of programing, the nice thing they now have a programing code to reset the entire VFD back to factory default. Seems to have a lot more functions available for running it trough a PLC or a laptop. I'm using it to run a 1.5 Hp milling machine so it's a pretty basic setup.

Mine failed in less than 4 hours, HMI screen is blank....sad.

Muy fácil de configurar

One of the drives came with a faulty control. Otherwise seem to work good.