Screen Protector Compatible for COROS PACE 4 Sport Watch (3 Pack)

Great glass protector. Easy to install and fit is great.

It is a very clean product. It is not meant to be beaten up. It will prevent scratches, and it will crack when hit, but it’s easy to replace, and it does protect the watch very well. Recently, I rubbed against a very rough wall during a hike, and the glass did crack however, the actual watch was unharmed, and I simply replaced it from the multi pack I bought. so it is effective and cheap.

Does not fit Pace 4. Screen protector is a little too large and they are flat. Watch face curves very slightly around the edge. This causes the protector to not sit on the screen. Essentially a 'bubble' all around the perimeter.

Easy to apply and fits my Coros Pace 4 perfectly. The instructions are clear. Just make sure the screen is free of dust—any bubbles will disappear. Great value for the price.

Note: my Coros Apex 2 Pro has a bumper guard already on it. I removed it for this process, obviously. Alright, so the most important thing to note about this process, and boy is it a process, is that you MUST ensure that there is NO dust on the watch face. NONE! No micro particles, no grease marks, nothing at all! If there is so much as a tiny micro flake on the screen, you know, the kind that can only be seen in the right lighting, the tempered glass will form an air bubble around it and there's no amount of pressing or creasing that will make it go away. If you're anything like me, you can't stand air bubbles on the screen, so I can't emphasize this enough, you MUST ensure that there is no dust on the screen before applying the glass. The good news, is that they send you 3 pieces of glass to try for (I ended up using all 3), dust removing stickers, which help a ton, and a decent little cleaning cloth and wipes that actually work. They also send you a suction cup to apply the glass with, but I personally found that this worked much better in theory than in practice, and on my 3rd try of getting this stuff on perfectly, I ended up ditching the suction cup and just used the edge of my fingers on the rim. The problem with the suction cup is that you have to have tiny racoon fingers to grip it properly and not drop the glass (thus ruining it), and lining it up in the center is more of a pain. It's easier to just carefully grip the sides of the glass after peeling away the adhesive strip, and carefully placing it down on the watch like a claw machine of precision. Oh, speaking of which, I'd also like to mention that your hands must have the precision, steadiness, and quickness of a skilled neurosurgeon to get this on w/o air bubbles and to get it on straight. Once you peel the adhesive strip off the back of the tempered glass, it's game on. Micro particles seem to just flock to it from the air (you're virtually screwed if you live in a house with pets). So you best act quickly, or else risk all the dust settling on the adhesive part of the glass and ruining it. My advice for doing this is to approach it as such: 1) place yourself in a room with no air current, good lighting, clean hard surfaces, and no pets 2) clean your watch to the best of your ability, use the cleaning wipes they give you and the cloth, as it left less particles behind than my personal microfiber cloths. 3) USE THE STICKERS! Clean with the little strip first, then the big white one. Then keep the big white sticker ON the watch face until you are ready to stick the glass on. This prevents pesky particles from sticking to it while you prep the glass. 4) Grab the glass, and grip with your fingers carefully around the edge. Make sure your hands are clean. Don't grip too tight or you'll bend the glass and this will form a creased air bubble once on. DON'T peel off the back adhesive until you are ready to put it on right away. 5) Peel white sticker off the watch face and check that no particles settled on it. 6) Peel the adhesive off the tempered glass and VERY QUICKLY align it and place it on the watch. These last steps go FAST, or as fast as you possibly can without screwing it up and particles getting in the way. I also suggest holding your breath. 7) Watch the magic happen as the glass sticks to the watch. It's a bit mesmerizing. Crease away any bubbles that form around the edges and middle with the cloth and your thumbnail. 8) Profit. Your watch is now beautifully protected and you can't even tell there's a screen protector on it. I do wish they sent more than 3 in the package. I feel like you'd really need about 5 or even 10, but thankfully my third strike was not for nothing. But now I have no backups so I'll be ordering another set for future replacements.

I've cracked two of these, so I'm glad they protected my watch. But they don't fit the Pace 4 very well. They tend to start separating from the glass within a few weeks.

These are simply okay. First of all, the packaging is a gamble and a nightmare. They shipped in super flimsy packaging, essentially in an envelope with nothing around the screens to keep them from being bent or damaged during transit. By the grace of what powers lie above, my screen protectors arrived unharmed. I have a Coros Pace 4, it fits the screen size PERFECTLY. HOWEVER!!!! And it’s a big however, the screen does NOT lie flat on the edges, it’s driving me insane, I can see an air bubble all around the outside edge, and I applied screen protectors for years while working at Verizon in highschool and college, I know how to put them on effectively. They would be much better if they sat flat and actually got all air bubbles out (plus then the edge wouldnt stick up for pockets to snag), and if the packaging was more protective. UPDATE: I have now used all 3 screen protectors, the edges catch very easily on coat jackets, arm sleeves, etc and I installed all 3 very carefully with the suction cup and tweezers so I could see the edges to line up nicely, STILL did not get a single protector to align with no bubble on the outer edge. They need to bevel the edges so it doesn’t catch on things and lies flat/without air bubbles. See photos for reference. The only benefit of these is the price, they’re good screen protectors if they just put a little more effort into the engineering to make it flat, not catch on clothing, and not have a ring of air around half of the watch screen.

Very easy to put on, and lasts several months. I am very hard on my watch so these screen protectors are a must!

Se caen rápido

Highly recommend. I wear my watch 24/7. You can see how damaged the screen protector was and it really saved my watch screen , with zero scratch. I will buy again for sure cause I put my last piece. Do not hesitate to buy it is worth it.

Facile à installer et protège super bien. J’ai congé ma montre à quelque reprise et rien n’a cassé. C’est solide!

Probably the most fragile glass screen protectors I've ever bought. Only takes a light knock to crack them

Invisible on Pace 4, just want was looking for