130W 7" inch LED Headlights with DRL Compatible with Jeep Wrangler 97-2018 JK TJ LJ Hummer H1 H2 Headlamp Chrome

I purchased these and installed them onto my 13 JKU. The fit was perfect and the install was a breeze. They look fantastic (recommend painting your Jeeps light bezel ring black to match though) and are much brighter and durable than OEM headlights. These headlights throw a wider, brighter light compared to OEM and really make driving at night easier (on or off road). You may need to adjust your headlight angle down a bit as I did to make sure you don't blind other drivers. This kit allowed for a simple plug and play hook-up without the day time running connected. If you want to hook up the daytime running lights, and your vehicle does not have a factory day time running wire already, you will have to splice the daytime connection in, but it is not required for operation. I have only had these on for a few days, but can tell you already that they are well worth the purchase. If I run into any issues down the road I will be sure to update this review, but for now, 5 stars. Photos to come.

Awesome Headlights for my Vintage MG Midget! I highly recommend. Very bright. Now I feel safe driving at night!

I needed to replace the headlights in my 08 Jeep Wrangler because they we getting fuzzy from road debris. At the same time I wanted more light, as the factory bulbs were weak at best. These lights appealed to me from the 130W output, and the price point. Installation was easy with the line up tabs landing in the right spots. Make sure you check that the female spade connectors are fully seated with in the adapter block, on one of mine it pushed the ground wire out. Removing it and seating fully in the block cured it. I installed one light and then checked against the factory lamps, and the difference was remarkable. Driving with them took a bit of adjustment, when I first turned them on at dusk they didn't seem all that bright but go better as it got darker. I believe this was a matter of perception. With standard headlights, the yellow color is easy to see how far out they are lighting. These lights provide a very white light, with no marked edge at dusk especially on low beam. The high beams are incredible. Amazing. Awesome. Like a previous review stated its as though a searchlight is mounted on the front. One slight problem I had was at idle, the lights would flicker like a strobe, never going out but the variation was annoying. An email to COWONE provided the answer in the form of a CAN adapter for H4 bulbs. A little research indicates that this is a problem with all Chrysler Products converting to LED headlights. Once installed the problem went away. A big plus to COWONE for providing an easy fix quickly. In the end I am very happy with these headlights and would recommend them.

WOW What a great upgrade! Really made a difference on the ol gal! When you hit the brights it looks like your in an interrogation room! We went with the chrome version since we have a white jeep and are going with a retro vibe. They look great. The price was fantastic and the build quality seems really beefy. It took about 15 minutes per light to install. The only tool you need is a t15 driver. The screws are a little small so a younger person could probably do it in 10 minutes lol

First off ill say just by the packaging you would think you bought a set of headlights that cost 5x..matter of fact ive bought stuff in that price catagory that WAS packaged worse..as far as ease,these fit my 1999 wrangler like a oem fit.they wont be seen from space but they are VERY bright..they do have D.O.T SAE stamped in the top of the lens in decent size lettering.as far as hookup goes takeong both bezels out and putting back took the longest.if youndecide to wire up the marker light it will take a little longer.i used a bump off the side marker light i had tied up do to me cutting my flares.use the black and striped wire off,no need for a ground as it grounds off the actual 3 prong plug in.i did take electrical tape and wrap around the connector as it was looser then id like and could see it wiggling out down the road.for 90 bucks u cant really beat it unless they take a giant dump on me in which case ill update this to the appropriate level of junk.hopefully thats not the case bc they do look good and a night and day difference to the pos factory lights jeep proudley bestowed on its buyers.

100% worth the money! EASY install, plug and play, perfect fit, etc. The brightness is that happy medium between a Coast Guard search light and a candle. The low beam pattern has a nice cut off and can be adjusted to be even and lower/higher. The high beam was shockingly well formed. It basically shines a perfect circle about 40 yards ahead. Most aftermarket leds just throw light every direction but these dont. I opted not to connect the DRLs because I could care less. But I did test them, and they work perfectly! Check my pictures and see for yourself!

Quick install. Perfect fit. Low beams are just ok. Not that bright. Was expecting better based on the "lumens" rating of these. These replaced another set of LED lights that I wasn't happy with. The lows on these are the same or slightly worse than those, which were rated at lower lumens on the low side then these. The light of these is more diffused. The others had very crisp cutoff lines and a wider beam. Where these accel is the high beams. They are bright. I have these in a 02 Wrangler with a windshield mounted light bar. The highs on these are very similar to the output of the bar. However, the highs are very concentrated and don't flood well. First pic is of lows. Second is highs. Phone makes the light look brighter in both pics. Overall okay. Wouldn't say they are terrible. Not sure I'd recommend them either.

Having read the reviews, I decided to change my factory fit headlights to LEDs. There are plenty of YouTube videos on "how to do it". I chose these lights and they arrived well packaged but with no instructions. The come with the connectors but I didn't use them as I purchased the anti flicker connectors that were suggested by some Youtube videos The issue I had was that some of the connectors on the inner ring holding the light in place were corroded and difficult to get out. I got them out eventually and then fitting the lights was pretty straight forward. These lights have daylight running lights and I plan on connecting those up to. The lights are very bright compared to the factory fit lights and look great so I'm happy with the upgrade.