Electric Bike Conversion Kit, 48V 1200W 26" Front/Rear Wheel E-Bike Conversion Kit with 3 Mode Controller, PAS, LCD Display, Twist Throttle

working great don't know if will have longevity . put it on adult trike it's way to fast. runs about 40mph on top end. on level grade. The whole kit was a breeze to install. simply plug and play. because of the type of pedals I have no good way to connect pac .

Instructions were a bit weak but videos helped. I initially didn't have the spacers on the inside of the fork and the wheel wouldn't turn freely. Also I needed to solder the battery connectors. Could have twisted them with a wire connector I guess. Very fast with a 48v 20ah battery. Plan to use it to commute to work. Edited after several trips. This was a good purchase. Working on more efficient use of the throttle. At first I was over throttling and my range was only about 25 miles but if I take it easy and ramp up slowly and keep it around 20mph I'm getting substantially more miles per charge. It tops out at about 32mph on flat straight path. I think I cam get closer to 40 miles if I take it easy on the throttle. Also in hindsight I would probably go with the front wheel and not the rear. That way I can keep the original gearing and not mess with the cheap gear cluster it came with. Overall really happy with the purchase.

Finally got around to getting my bike converted to electric. Kit installed fine however the "j" of the spokes (where spoke meets the hub) from the beginning didn't look right... Not flush. But they were all carrying the same amount of tension, so I gave it the benefit of the doubt. However a few decent length trips (20+miles round trip) a spoke broke off at at the hub... Couldn't figure out what the slight "tink tink" sound that was coming from the bike... Another trip around town and I felt the rear kind of wash a little bit around a corner, pulled over to check things out and 4 more spokes are broken... All at the same spot... Super frustrating.. hopefully the seller will make things right. Keep in mind I weigh 160lbs. The bike is a high end specialized sworks enduro. And the install was professionally done. Update! Contacted company and they went out of their way to handle my issue in the most professional manner. They were fast and efficient in finding a resolution that far exceeded my expectations. I am going to be doing business again with them soon. And i absolutely recommend them for all of your ebike conversion kit needs!

I have been an avid rider for many years now, but due to physical limitations, I cannot ride a pedal bike for any distance anymore. Installing the PEXMOR motor wheel on my Fuji was one option, and it turned out to be the best choice as the system has served me well for several years now without any issue. The power is more than sufficient, and the instrumentation, motor controls, and battery efficiency have been fantastic. Installation was also very easy, with everything essential provided. Be sure to locate some heavy wall tubes with extended air valves due to the construction of the rim.

The motor and controller that come with this kit are pretty amazing for the price. I was able to fit this motor to a 26" GT Stomper mountain bike with the frame bag and a 48v 15ah battery. With this set up I can easily get 35-40 miles without pedaling at all. The acceleration leaves a little to be desired, but that's just me. The top speed is great on a fully charged battery; I was able to get 33mph on my bike. This is an awesome kit. If you wanted to go cheap, you could get this and a 10ah battery for just shy of 450$ and throw it on a cheap bicycle and limit it to 750w (I would not recommend 1200w without disc brakes) Overall, this kit is a solid preformer. In the past two days I've been riding, I've put over 125 miles on the bike.

Installation went relatively well. Rim fit my 2.125 tire. Pas disc would not fit my crank. Customer service want utube videos of problems before discussing issues. Travels 9 mph in pas 1 and no a way of changing this. Has a cruise control function that is nice. Adjusted speed limiter down to 16 mph. Plenty of power, probably would go 30 mph. One brake switch does not work but one does. The kit was better than expected, however, it has been a learning experience. Forums and utube are the only service options.

Does not work and cannot get support from manufacturer! Only way to contact is by email; three sent – no reply! In my opinion, the controller is not working as I cannot get the display to work or the motor to turn. If I hold the power button on, and operate the throttle, the motor will run… I would return this item except for the huge amount of work required to disassemble The E bike, remove the tire, ship it back, etc. Instead, I am ordering another controller with its own PAS and display. DO not buy.!!!!!!

Really strong motor, but it last very long. Only a couple of months of very moderate riding on pavement. I suspect one of the hall effect sensors has broken. I bought the same unit for the back wheel and had the same problem. 3 stars is probably generous, but I'll give some wiggle room for user error. That said, I don't recommend this wheel. I bought a much less powerful one of a different brand, and it's still running great. I hope I can figure out how to fix this unit as well as the other one. They're not cheap, and after having two of them from PEXMOR die on me after a couple of months, I would have been better off buying a factory built e-bike.