Trabo7 Inch Masonry Segmented Rim Diamond Bond Blade for Cutting Cement, Pavers, Concrete with Rebar, Natural Stone and More, with 7/8 Inch Arbor with 5/8 Inch Reducer Ring

Perfect! Easy to use, smooth cut.

Quality concrete blade. Cut through 12x12 concrete pavers easily.

Hold up good especially for the price

Made about a dozen cuts and can tell it’s lost a bit of its cutting power.

I bought 6 of these blades to do a concrete project, not knowing how long they would last. I completed the work with 3 blades.I had to cut into a foundation wall, to remove an area of 2" depth, by 16" high, by 10 ft long. I cut horizontal lines about every 2 1/2" , and vertical lines about every 1 1/2". A LOT of cutting! Then used a hand sledge and chisel to snap out the blocks. No issue going through the occasional rebar hit.The 3 blades I used still have good life in them, I just changed out because of some speed loss; I needed to get done quickly. Going to use the old blades to do some nail cut-off's to reclaim some old wood.**Note: I did waste some time in setup because I couldn't find the blade center adapter! Completely missed it when I slide the blade out of the packaging - it was taped to the inside wall of the packaging and easily overlooked.**Note 2: Be prepared for the massive dust if cutting concrete! Strongly suggest a real respirator, not a paper face mask. I used a (friend with) leaf blower to keep the dust moving so I could see where I was going. Also used a watering can to wet down the concrete.Plenty hot, but never had an overheating issue. Excellent blade!

Works great for cutting Hardie Board

Great value with fast shipping.

cuts through cinder block like butter. Concrete as well. Great blade at an unbelievably low price.Tempted to buy a dozen more just like it.