PerlegearUniversal Swivel TV Stand Base for 32–70 inch TVs, Height Adjustable Table Top TV Stand Mount with Tilt, Tempered Glass Base, Holds up to 88 lbs, Max VESA 400x400mm, PGTVS26

Got this for a 65" LCD TV and it's a fantastic stand. So nice to be able to swivel the TV and it turns with the lightest touch while staying exactly where you put it.It also looks great, and is so great to be able to put it on furniture that has a small footprint, rather than something that can accommodate the very wide stance that TV feet have today.The stand is also very sturdy and the locks are handy to lock it in place on the frame. Plus if you want to hang it on the wall down the road instead, you can reconfigure it for that purpose.The only issue I had when assembling, is the short 4 screws supplied to attach the plate to the top of the stand. The plate has a bracket that is made to slide on to the top of the stand (over the holes that have a silver ring). So the screws go through the bracket holes and into the stand holes.Only they weren't long enough to be able to reach the threads in the silver-ringed holes. Because those holes (in the top of the stand) have a short neck before the threads start, and the bracket did not hug the top of the stand close enough... so the distance was too far for the very short screws to catch the threads. If I got one side in, I couldn't get the other... and if I put one screw in on one side, I couldn't get a screw in on the other (even without tightening it down).I could have tried taking the bracket off and bending it in some, but aside form it being very thick steel, I did not feel comfortable having those very short screws securing the very part of the stand that was going to be supporting the entire weight of the TV.So used 4 screws of the same size (but longer) that were VESA screws that also came with the kit, that I did not need for my TV, as mine used one of the larger sets. And the VESA screws were handier anyway because they were phillips heads. They are silver instead of black (the designated screws are black to match the stand mast) but you don't see them anyway and I felt much better using those! And since the stand is hollow, the longer length didn't matter, except it' made it super easy to attach the bracket and much more secure IYAM.On this point, in the manual it says (gist) if you want to tilt it and it's not budging, to slightly loosen two of these screws... another reason longer screws are better. (I don't need tilt but mentioned that because it's relevant here.) You don't want to back out a short screw that's only catching a few threads anyway, and potentially have it fall out... but won't have that concern with the longer screws.So I would buy it again in a second (but would personally do the VESA screw swap regardless). But did not take a star off because the stand is so very nice and the screws I needed were included, even if not intended for that purpose. And maybe most brackets hug the mast better so the short screws might work for most people and they won't know the difference.

i bought two of these, one for a 55 inch tv and another for a 65 inch tv, i will say the stand is pretty heavy, when attatched to a big tv, not a bad thing, it provides more stability, but obviously make sure you are placing it on something sturdy. i love that you can adjust the tilt, height, and you can turn it left and right. i suggest setting it up on a bed or mattress or something so you have plenty of room to adjust things, since it's not the easiest process. but once it is adjusted properly it pays off entirely. you will need a second person if possible unless you're extremely strong ( at least for my 65 inch tv, i still did both my tvs by myself but it was not an easy feat at all). all in all i just highly recommend the product if you need what it provides, i can't really complain about anything.

This TV Stand arrived on time and well packaged ..I have been using this TV stand about three weeks ..It works perfect with my Roku 50 TV...It looks very nice and is very sturdy.Easy to assemble ...It comes with multiple screws and washers for any application ..Great for an older TV stand. that needs a center stand application ..easy to level, and Height adjust.A great deal for the price.

so far so good...easy to put together..slight issues..screws supplied for brackets go behind tv were too long..i had use a spacers for extra gap which worked out great..tips: higher the bracket lower the tv goes..so if u place brackets high on back of the tv u can place tv lower...if the one of the screws they supply threads work but too long use the spacers if u dont want to go out find screwsthat fit ur tv perfect..have a picture show how the last screws with bracket go inonly fault i would say is u have to take out the screws from brackets to keep adjustiing to height u need..also need to take out the bolts in the neck to adjust the tilt...wish u could do both on the fly when the tv is already mounted

I was a bit worried but its works great, just read the instructions and buil it properly. Holding a 60 inch just fine .im actually impressed i didn't have faith in this holding the tv ..well so far its great .

This worked out so well to use my existing TV stand. That was not wide enough to support a bigger TV. This allowed me to mount a bigger TV onto this stand and still use my existing TV stand that was not quite wide enough so that I can be able to watch TV in my living room without any issue. All the necessary hardware is included to mount on different types of TVs, great value or the money since it saved me buying a brand new stand and it was super easy to assemble. Very sturdy materials. Not worried about it falling apart

It's valid very solid. No rocking. I have a 65" TV on it and I have no worries. It fits great. And you can't beat the price because I was looking for the actual legs for this TV and they were too much.

I recently purchased the Perlegear TV Stand from Amazon, and overall, I'm satisfied with the product's quality and design. The delivery was prompt, which I appreciated.However, upon opening the package, I noticed the glass base had some scratches. While it's purely cosmetic and doesn't affect the stand's functionality, it was disappointing to see.Given the issue, I'd recommend buyers carefully inspecting the product upon delivery. Despite this, the TV stand itself seems sturdy and well-made. Hopefully, future shipments will have better packaging or quality control.