Bosch T128BHM3 3 pc. 3-5/8 in. 14 TPI Carbide-Strip Special for Laminates T-Shank Jig Saw Blades

After using several other brands and different blades for various materials, metal, wood, wood with nails, etc, these by far outperformed Diablo, Milwaukee, and a few others. Faster than multi-tool, better than table saw when having to rip just a few or cutting around walls, toilets, any other obstacles that you’re bound to encounter when laying lots of flooring. Can’t speak to how they work for any other materials, only bought these to try on LVP, all other blades I’ve tried were good for one full rip before they slowed down until it was faster to just get out a multi-tool or score and break like the ends, only it’s quite a bit harder to score and break one long ways, and that sure won’t work when cutting around other obstacles.. if you’re just doing something as simple as a single bathroom buy these, it’ll be worth it. If you’re doing lots of flooring, definitely buy these, save yourself some time!! They work, I’ve got probably 8 rips and half dozen corners cut on one blade so far and it has barely dulled or slowed. They do have a pretty large kerf and I have busted a couple teeth making too sharp a curve cut. Still cuts fast and clean though. Just don’t expect to make any tight turns.

Finding information on how to cut hardiebacker is surprisingly difficult. I'm cutting the 1/4" and this blade has been a godsend for me. Hardiebacker is full of materials which will dull high speed steel tools really quickly. I've destroyed a few drill bits so far. Scoring with a carbide tool works well for long cuts, but if you need to make cutouts for outlets, or need to trim 1/4" off an edge, or just need a clean accurate cut, I highly recommend this blade. Using my very-cheap black and decker jigsaw I can get very clean cuts using this blade. The nice thing about the jigsaw is that the relatively small motion of the saw and thin kerf produce less dust than a circular saw or something. Will buy other bosch specialty jigsaw blades in the future.

I purchased these primarily to make precision cuts in thick laminate shelves and the results were outstanding. The cut edges were extremely smooth and free from any chipping on either side of the shelves. I highly recommend.

I make cutting boards from solid surface materials manufactured by Dupont, Wilsonart and just about every other brand on the market. I purchased them after going through about 20 jigsaw blades I traditionally use for wood. Initially these blades perform admirably, but after about cutting 200 feet of hardsurface 1/2 inch thick material they begin to lose their cutting ability though slower cutting capacity and increased vibration. If you only occassionally cut this type material you'll be glad you obtained these Bosch blades, but if you are like me working in production style small shop, cutting material all day, you will find yourself having to change blades. Bosch sells these in a 3 pack configuration which should serve you well. Expect to pay 3 times as much for this specialty jigsaw blades. But, I have yet have one break during use. At about $30.00 for a 3 blade pack, they are worth the added expense.

Cut carbon fiber like butter

Let me begin by saying that I like Bosch products and generally their quality is good. I have a variety of Bosch products from tools, appliances and even wiper blades. I bought the pack of three jigsaw blades to cut 10mm wood laminate. I tried using the regular Bosch wood/metal blades but the blades got dull in no time. I went through too many of those blades before I bought a Bosch variety pack of jigsaw and the only one that worked well was the Bosch progressor but it was a downward cut causing chipping of the laminate surface. It worked but I was looking for something better for smooth cuts. So, I bought the three pack of Bosch's T128BHM3 blades which are supposed to be carbide and upward cut for laminates. Brand new blade out of the pack was struggling to cut and the jigsaw vibrated, shook and jumped constantly. I tried different cutting speeds and different jigsaw speeds but nothing helped. It was loud and the shaking was so bad that it broke the laminate. I threw it out and went back to the progressor blades. I am very dissatisfied with this purchase. I have not tried to cut any other material. It struggled with a 10 mm mohawk laminate flooring.

I used this blade to cut 7mm laminate floor. I cut roughly 25 linear feet of laminate with this blade in a job totaling 330 sq ft. It didn't lose it's sharpness or effectiveness. It had good control for angular cuts and it didn't split the laminate. Note that this was very low quality laminate, I would expect this to work even better for higher quality laminates. This can also serve double duty for wood, vinyl, plastic, etc so it'll stay in my shop for future use. I noticed a neat feature, the bottom half of the teeth are aimed up and the top half are aimed down. The middle teeth are generally straight and low profile. A very clever feature. While expensive, it was worth it to me to use this blade and it saved me time on the job.

Pour bricolage occasionnel, je voulais une lame qui fait tout

This was mis categorised . This was not GLUCASAN -IMMUNE SYSTEM SUPPORT.

Zero tearout, very impressive quality when I used them for cutting melamine.

Las ocuparé para cortar melamina a ver que tal funcionan

Purchased this to make even cuts for Durock Cement Board with EdgeGuard. Worked great with a clean cut.