PH-F120D30_DRGB_PWM_BK01

I absolutely love these fans. I think they put the Lian Li infinity fans to shame. They're easy to put together, and once they're put together you only have one 4 pin power cable and one RGB cable coming from the fans. The daisy chain system on these fans eliminates all the cables you'd normally have on most other RGB fans. I like to show off my builds and I take a pride in how well my PC builds come out. These Phanteks D30's reverse flow fans were perfect. The 3 bottom and 4 side fans are all intake fans. Anyone that knows about building PC's in cases like the NV7, knows that if you want normal fans to draw in air, you have to flip them backwards, which means you have to see the back of the fan and fan frame. That doesn't look good to me. So I got these fans so you can see the front of them and they're still drawing in air instead of pushing it out. It looks so much better. The RGB is top tier for sure. The RGB is bright and accurate. looks amazing. My Pixel 6 camera is pretty scratched up so I couldn't really capture the full detail of the RGB, but I can promise you it looks even better in person. The case I have (Phanteks NV7) was designed to be built with these fans inside it. There are so many fans, I can run them at the lowest RPM's and they are silent. They do get loud if you push them above 75% not that bad though. They only get super loud above like 90% but you don't need them to go that high ever. I build PC's all the time and one thing I can tell you is for sure, I will be using these fans exclusively from now on.

I purchased this set of Phanteks PH-F120D30 (3 fans) in black to update a 5 year old computer build for a relative. I really like the modular set up on these fans, and how these keep your wiring down to a minimum due to the surface electrical contacts on each fan. They feel heavy, and the fan bearings seem superior and quiet, like they will last a long time. I also like that they are not forcing some separate ARGB controller hub on you, and leave that choice up to you. Last but not least, these fans look very clean and modern, and put out decent airflow without a sonic boom. These fans are not for just looks only, like some other brands out there. You might have to take care and measure your application, as these fans are 30 mm thick, and not the standard 25 mm thick, and might cause issues in some installations. If I have need for additional 120 or 140 mm fans, I know what I am going to go with. These fans are great.

I ordered the Phantek serial fans in reverse and standard to replace the fans in my In win case as I hated all the spaghetti wiring I had with 6 fans and I hated looking at the backside of the fans I had for the bottom of the case. So I installed the 3 reverse fans connected together with one lead wire that alleviated a lot of wires. They screwed in okay but I couldn't get them to come at first until I discovered I had connected the lead wire to the out terminal of one of the fans when it needed to be connected to the in terminal (duh) that are marked small on the post near the terminals. (Read instructions) Using the regular set of fans I only connected two together for my 240mm AIO cooler and used the third for the back exhaust fan. The kits comes with two lead wires, which was nice. Clipping the fans together was a little tricky but manageable. The only major problem I had was putting the two fans on my radiator as when hooked together the holes didn't line up. I was able to screw the top fan in but the bottom fan was off the holes some. I read someone else had that problem and had to remove their radiator to get them to screw in but I didn't want to go that far and was afraid I might have to separate the fans which I did have a spare lead wirer to do so but as it was the bottom of the lower fane on the radiator was resting on the edge of one of the bottom fans so I had no room to move it down but with the clips in the fan it seemed very secure anyways so I just left the screws out and snapped in the remaining clips on front. The fans are a little thicker than regular fans so keep that in mind if your tight for space. Other than that I really like the fans though I think they were a little pricey.

I knew these fans were top of the line. I have 9 Phanteks T30-120 on my PC and was looking at adding the inverse ones for the bottom intake. Suffice to say I did wanted to try these as everyone keep talking about them. While the performance is not as good as the T30's the aesthetics pretty much compensate that. Performance is little better than the T30 installed improperly as intake but nearly as good but aesthetics are soo much better.. like several light years ahead even to any other fans I've tried that I am more than pleased with the results. In fact, I am now considering replacing all the T30's in my case with these, even if performance is not as good because they really made me smile every time I see my PC. Installation, durability, aesthetics, LED quality, color representation, everything fits perfectly with the "very premium" tag. Definitely must buy, best "good looking" with "good performance" all around fan on the market.

Amazing fans, the feel very durable and look super clean. The cooking has been amazing for my build and the color on the RGB is insane. I’ve got both regular and reverse fans just to show the proper side while getting proper flow. Super easy to install and very durable when screwed down.

Quiet, Chainable, excellent colors, decent value. These are 30mm deep fans and they will move a lot of air! They are however shy of 120mm due to how the halo LEDs are implemented. This doesn’t seem to cause major airflow issues however it won’t be as good as others in the same class. Reverse flow fans tend to have lower performance and more noise. Luckily you don’t have to run these fans are high RPM to get Good flow. I would not really recommend these on high density radiators.

Ventole esteticamente incredibili. La fattura ed i materiali sono il massimo che potete trovare in commercio. Arrivano nella scatola con moltissimi accessori come perni di gomma, viti, cavetti e molte parti di ricambio. Le ventole sono reverse, significa che spingono dal dietro verso avanti, cosa che ne riduce un po' le prestazioni a favore dell'estetica. Daltronde chi acquista questo genere di ventole predilige l'estetica alla prestazione pura. Nel mio caso non avendo bisogno di una dissipazione estrema non ho avuto questo problema nello scegliere. Queste ventole si possono montare singole oppure tramite delle apposite clip attaccarle tutte insieme gestendole con un singolo filo in entrata ed uscita, cosa che aiuta molto a tenere pulito ed ordinato il pc. Le ventole sono molto silenziose e gli effetti dei led sono incredibili. Il prezzo è alto ma se cercate ottima qualita' produttiva ed un'estetica superiore hanno pochi se non nessun rivale.

Facili da montare, pratiche da collegare ma molto costose. Sono ottime sul mio Phanteks NV7

Per passaggio a casa Phanteks, ho deciso di sostituire le ventole Corsair con quelle Phanteks (principalmente per gestione cavi). Ottime ventole, buoni gli effetti di illuminazione (gestibili dal software Asus Armor Crate) e ottime le temperature. Onestamente, il software Corsair (iCUE) mi ha stancato, quello Asus che può essere usato per gestire le Phanteks, molto meglio (In generale, credo questa configurazione è migliore di quella Corsair). A livello construttivo, sono belle robuste (un pochino meno i componenti di connessione tra le varie ventole) ma nel complesso ottimo prodotto!

Gran flujo de aire gran rendimiento y el RGB le aporta un toque de elegancia