58mm Coffee Tamper - V4 Spring-loaded Tamper with Stainless Steel Flat Base - 15lb / 25lb / 30lbs Replacement Springs - Anodized Aluminum Handle and Stand - Fits 58mm Standard Baskets

Great addition for my coffee setup (Breville barista express). The coffee grounds are always flat and even for a great extraction. Seems sturdy enough, I have been using it quite often for about a year and no issues or complains at all. Easy to clean, on a day to day usually just a soft brush to dust off the coffee es enough with a better clean about once per month.

Bought this for my breville bambino and just word to the wise. The breville bambino portafilter is tapered and this will NOT fit the stock portafilter basket (not even the double shot one). I just so happened to buy a naked bottom portafilter at the same time so I use that instead. Make sure your basket is not tapered at all. I like that it comes with extra springs in case they wear out, so that’s nice. The whole thing does feel nice a sturdy in my hand, nice and heavy. It has a metal cap you’re supposed to store it in, but I wish that was rubber instead. Also I think that it maybe could tamp a liiiiitle bit “deeper”. I’m worried that if I use a deeper basket or if I just use less coffee (I currently do 18g in, 40 out), it may not be able to tamp all the way. But you’re not technically supposed to do that with espresso baskets anyway but just a thought in case you always brew single shots (like 9g).

Super easy to use and feels great in the hand. The clean, minimal look fits perfectly on my coffee setup, and it just makes the whole espresso routine smoother. Simple, good-looking, and does the job really well.

Feels like quality. Works for my Breville Barista Touch 54 mm basket. Tamps my beans beautifully.

I've had this tamper for almost two years. It has been very reliable -- it is solidly made, easy to clean, and easy to change out the spring if you want a different level of resistance. I started off with the 25 lb. spring and it seemed to work well, but I wanted to give the 30 lb. spring a shot, so I switched it about 3 months ago. It took a bit of practice, and using two hands to get the right leverage, but the 30 lb. spring seems to be the better option for more consistent espresso shots. I'm now looking at other Normcore products, since this one is made so well and is priced very reasonably compared to other tampers that have adjustable resistance.

I have a very nice, heavy tamper that I've used for 19 years. Recently I got intrigued with the idea of a spring loaded tamper because I never had any idea what force I was using manually. This particular tamper is costly but well worth it, in my opinion because of how it's made and because it also had 2 springs, as well as a total of 3 inner springs to determine tamp pressure. Beautiful, heavy, solid construction. The 25 lb spring that comes pre-installed works best for me and I don't see myself changing it. The design with the leveling plate makes it all quite easy to press down enough. Some reviews complained about the lack of an audible "click" but that isn't necessary. With the leveling plate on top of the filter basket, you just press down the entire distance that you can push and that's it so no click needed. What I've realized though all this is that I was never tamping hard enough with my manual tamper. In addition, when I would press it down hard the tamp would not be even, and one side would usually end up higher than the other, and this led to channeling. It's important to properly prepare the puck. I measure bean weight and grind into the portafilter basket. I use a funnel collar and and WDT tool to distribute the grinds well and break up clumps. I then use a distribution tool, which smooths everything out before the final tamp. Then comes the tamping which I can now do with a consistent, level pressure. I have my grind fineness pretty dialed in at this point and haven't needed to change that up much. Since implementing the puck prep described above, every single time my coffee has turned out perfect. Before doing things this way and without my new tools (i.e. previously using only finger smoothing and tamping with a manual tamper) I had a lot of misses and wasn't usually happy with the espresso I got. I'll say it again....the quality of your shots depends on good, consistent prep of the puck. This tamper is a very necessary part of that prep, I now realize. I recommend this particular tamper very highly. Last comment: You can get the same tamper with a circular ridged bottom. I can't see there would be much advantage to that, and the ridged bottom would definitely catch coffee in the ridged areas, making cleanup a bit more annoying. With this smooth tamper, all it requires is a quick wipe on the bottom (usually nothing there anyway) and then there is a nice little matching cup to set the tamper in.

I use this tamper with my Breville barista express. The tamper that comes with the machine is flawed in the sense that you are unable to evenly tamp a shot of coffee. With the Normcore tamper, it features a collar which rests on the basket of the portafilter and EVENLY tamps the coffee which results in a great tasting shot. The tamper itself is very high quality and feels great in the hand. Do yourself a favor and just buy one!

Fits the Breville Bambino and the Breville funnel 54 mm perfectly. With the funnel, it only gets the coffee level to the brim of the basket, then you have to remove the funnel and tamp again. However, it greatly limits the loss of coffee if tamped without the funnel. I really like the constant pressure, it is nice and sturdy, and comes with two different spring weights.

Es el tamper de 57 MM que tu cafetera LELIT necesita, no hay muchas más opciones en 57mm, y esta es la mejor, no tienes que pensar, siempre haces la misma fuerza, la pastilla sale perfectamente equilibrada, eliminando todos los errores humanos del barista casero.

I am new to the world of "proper" espresso and wanted to look for an auto tamper to remove variables from my workflow Very easy to use and consistant results - which has helped increase the consistancy of my shots.

Good

Qualitativ hochwertiger Tamper mit einstellbarem Druckwiederstand Das Wechseln der Federn um den Wiederstand anzupassen ist sehr einfach Minimal zu klein für Lelit 57mm Portafilter, man muss 2-3 mal Tampen um alle Randbereiche eben zu bekommen Dies ist aber aufgrund des Auflagerings überhaupt kein Problem

Ürün bütün espressolarınıza eşit tamperleme sunan yaylı bir mekanizmaya sahip. Bunu gerçekten eşit bir biçimde uyguluyor. İçerisinden birden fazla tamper yayı çıkıyor bunların yaylarının uyguladığı kuvvetler farklı. İsteğinze göre değiştirebiliyorsunuz. Böylelikle kahveye uygulanan kuvvet değişiyor. Hepsinde size kahvenize net bir standart getirmiş oluyor...