Low Profile Keycaps - Shine Through Keycaps 60 65 75 100 Percent, Keyboard Key caps PBT Full Size for Cherry Gateron MX Switches Mechanical Keyboard, Grey/White

The keycaps feel great to type on, the tactile feel is smooth and pleasing. The sound is a pleasing echo that tends towards bass. The lower profile makes typing much more pleasing if you're into the lower profile. The colors are nice quality, I wish there were a bit more variations but you can't knock it for that. Using them on a Keychron Q3 HE. The south facing LEDs on that keyboard aren't great. There is still light bleed between the keycaps just because of the nature of south facing LEDs but the legends do light up but you really have to push up the brightness on the backlight to get the edge keycaps to shine through. In other words, its good enough for south facing LEDs.

I've gone down this rabbit hole recently of trying to find the perfect keyboard. I ended up really liking the Royal Kludge RK84 with mechanical blue switches (I am a heavy typist, programmer/IT pro) except for one thing... the keycaps were WAY WAY too tall. Instead of sending it back, I decided I would keep the keyboard and get a set of low profile keycaps. Enter these... They came really nicely packaged in a two-layer tray that was laid out like a keyboard would be. There were keys for anything I could imagine needing (different sized Alt/CTRL/Function keys for different keyboard layouts, etc.). The finish is matte with just a little bit of texture. Overall feel is 4/5 (I prefer the soft-touch feel of my keychrons a little better). I had no problems whatsoever installing these and the fit was perfect. My keyboard has north-facing LEDs so shine-through is adequate, although some of the larger legends (Caps/shift) aren't completely uniform. Not enough of an issue to bother me. Again, 4/5. There is no legend for media keys or any of the specific shortcut functions for my keyboard (of course). While I think this makes for a really nice, clean look, you're going to have to refer to your keyboard manual for anything other than standard use. I don't tend to use media keys, and I've memorized the important shortcut functions (like connecting my keyboard to a different device) so it isn't a big deal to me. YMMV. I'm a big fan of the profile and the typing experience is superb. Even though they sit a little higher on the key switches, you can see the huge difference in height in the pictures I provided. They have a nice wide crown with narrow shoulders that make it easy to get an accurate keypress without accidental activations. I did some objective measurements using the stock keycaps, these, and my Keychron K5 and K3 keyboards (both low-profile). These consistently produce the highest WPM and accuracy scores for me. Again, YMMV. Keyboards are extremely personal, but if you are looking for a low-profile keycap, I would absolutely recommend giving these a try. I only wish they came in more colors so I could customize a little bit (even if it did cost me an extra $20).

I got these keycaps to upgrade my Logitech MX Keys Mini Mechanical keyboard. I found that I was experiencing a lot of typing errors with the stock Logitech keycaps.I knew beforehand that some keys on the Logitech keyboard would not be directly replaceable with these keycaps because of the unique layout and geometry of the Logitech 75% keyboard. I was able to replace the keycaps for the keys that I use most often with these keycaps. They look and feel great and the shine-through backlighting lighting is perfect. My only disappointment was the lack of Mac specific Option and Command key caps or a hybrid solution (both legends shown) that Logitech and other keyboard makers use to achieve cross platform compatibility. We are only talking two (2) keycaps that differ between the PC and Mac. I use the same keyboard with both Macs and PCs so I already know how eachh one works. For keycaps that were not replaceable, including Shift keys, Function row keys, multifunction keys used in combination with a Logitech-specific function key, and extra keys that Logitech added for their own 75% implantation, etc. Different vendors make different choices on what to do with the extra keys unique to their own design. Totally expected. Despite this subtle issue with the two keys, I definitely feel that these keycaps are a significant upgrade to my Logitech MX Keys Mini Mechanical keyboard. These keycaps were super easy to replace, came with the necessary keycap puller, and are very stable and secure. These keycaps simply provide a much better typing experience for me.

I have the Lofree Flow Lite100 keyboard. The keyboard itself is great, but the keycaps that came with it were pretty boring and I found them hard to type on. I'm no super typist, but I usually do ok. With the OEM keycaps, I kept hitting multiple keys at a time (more than usual) and it was really frustrating. Yes, I know, learn to type better. I'm 52. My typing is as good as it's going to get. Anyway, I saw these keys and the color is a PERFECT match for the Lofree. They aren't super colorful, but at least they aren't all the same color making the keyboard completely monotone. It came with black accent keys as well, but I'm not using them. I like the lighter colors a little better. The Lofree already really sounded good, but IMO, these caps sound just a tiny bit better than OEM. They have a nice texture on them (see my photos). They are a tiny bit taller than either the Lofree OEM or Nuphy OEM, which I also tried. They even have duplicate corner caps for each that are more rounded than the normal caps. This also gives the keyboard a nice look (also, in my photos). The see thru legends are really sharp and look great. The best thing about them? My typing is somehow more accurate. I'm not sure if if it's because of the slightly taller caps which puts more space between the caps, or the texture, or both, but it's noticeable to me. I don't really have anything bad to say about these caps at all. If I could, I would like some different colored accent caps (esc, enter, space) included, but that is nitpicky. This keyboard looks, sounds, feels, and types awesome now. It looks OEM but better!

Keys fit cherry cross type stems, however the all the cross on these key are full closed and as such can have issue with certain stabilizers and there spacing. This is fixable with a craft knife and a rotary tool, again irritating but not the worst. However the bigger issue is that these are shine through they are dye sub and sadly the dye on these keys has bled into the shine through are so if your back light is of the legends barely show up. With the back light on the legends can be muddy on the keys. All said these keycaps are worth the cost they look great just be aware you might need to modify them for some keys on boards like keychron low profile.

I have a Keychron K3 Pro keyboard that I thoroughly enjoy. It is a low profile compact keyboard with no number pad. It's very slim compared to the original Keychron K2 mechanical keyboard I purchased several years ago that is still today going strong. I wanted a more of "black" look to my keyboard for black is sleek and modern making your desktop look cutting edge. I did my research and found the WOMIER Low Profile Keycap Shine Through Keycaps for Cherry Gateron MX Switches. They are doubleshot PBT design, oil resistant, and durable. These keycaps are 4.5mm in height compared to the 11mm full height keycaps. The finish I would prefer to be a "smooth" matte black. The finish on these keycaps is good, but could be better. They don't need to be shiny. Let's see how they work out in the long run. What is essential for good long term wear is to keep the keycaps clean of any oils and debris collected after use. I clean my keyboard several times a week with a simple damp rag. Twice a month, I use a rag dipped in Dawn dishwasher soap, and clean the caps followed by a damp rag. This usually gets the job done for long term wear. The one thing I noticed is that the caps lock keycap was designed with just the "plus" insert which is normal, but for my keyboard, it had "three" catches as noted in the attached picture. This is not a deal killer and I understand the vendor designed these keycaps to be generic for all types of low profile keyboards. However, they could have made one of the "caps lock" keycap with THREE catches. Again, not a deal killer, but if this one particular keycap gives me problems, I still have the original keycap as a spare. The included orange keycap removing tool was not of much use. It was too short compared to other keycap pullers that were longer and easier to use. In summary, this is a decent product that gets the job done with a couple of nuances that is no big deal, but warranted mentioning in this review. This is a value based product. I recommend them.

The keys look super nice and are very well made. I like the laptop keyboard feel, and this really gave that feeling. Good fit and lighting. Perfect key caps!

These are TERRIFIC keycaps that I can easily recommend. I used them to replace the original Keychron LSA keys that came with my K3 Max low profile keyboard; as well as a set of Nuphy NSA shine-through keycaps. The Womier keys are quality double shot PBT with very sharp lettering and excellent shine through By contrast, the Nuphy keys are dye sublimated PBT; the key symbols are fuzzy and the shine through is washed out. I especially like the tables on the Womier keys. They have deep spherical tops, similar to SA keys, that snuggle my finger tips for better comfort and typing accuracy. By contrast the Nuphy NSA have very large shallow tops that easily catch finger nails causing miskeys. The Keychron beat the Nuphy for comfort but doesn't match the Womier for accuracy. That said, I wish Womier included common media symbols on their Function Keys. I switch between working on Mac and Windows machines and having media symbols clearly inscribed on the Function keys makes my life much more convenient. I ended up leaving the Nuphy Function keys on my keyboard specifically because Womier lacks media symbols. Lastly, the stems on the Womier keys fit loose on the Keychron stabs. I found that squeezing the stems with a pair of needle nose pliers tightens them up nicely. But for the above two nits, I would quickly give these keycaps 5 stars.