Fly sky DIY Mini Carbon Fiber Frame Kit 100mm R6DSM Receiver F3+OSD Flight Control Motor VTX+CAMERA TX for RC Quadcopter

الوصف

Specifications: Radiolink R6DSM, 2.4G 10 channels receiver, DSSS and FHSS spread spectrum working synchronously, 1 gram weight, SBUS and PPM signal support, use for Radiolink transmitters AT9, AT9S,AT10 and AT10II, is the best choice for racing drone. How to match code with transmitter: 1.Place the transmitter and the receiver close to each other within 1 meters. 2.Turn on the transmitter, then power on the R6DSM. 3.Connect CH3 of R6DSM to ESC. 4.There is a black button on the R6DSM, press the binding button twice in two seconds and release, receiver light start blinking, after about 8 times blinking, match code success when receiver signal LED always on! Installment of receiver antenna: 1.The antenna must be kept as straight as possible. Otherwise it will reduce the effective range. 2.Large model aircraft may of some metal part interfering signal; in this case the antennas should be placed at both sides of the model. Then the best RF signal condition is obtained at any flying attitude. 3.The antennas must be kept away from conductive materials, such as metal and carbon by at least a half inch. The coaxial part of the antennas does not need to follow these guidelines, but do not bend it in a small radius. 4.Keep the antennas away from the motor, ESC, and other noise sources as much as possible. 5.Press and hold the Easy Link (ID SET) one second, now the receiver starts work. 6.The LED indicator will turn and keep in red. Package Listing : 100mm Mini Carbon Fiber frame Kit *1 8520 CCW Motor *2 8520 CW Motor *2 LANTIAN 60mm CW /CCW propellers * 2pack (1pack have 4 pairs ) Q25 MINI VTX+CAMERA 25mw 16ch Transmitter 800tvl coms Camera *1 4 in 1 3.7V Lipo Battery Charger USB Interface 4 Ports *1 X5-11 600MAH 3.7V Battery *4 F3 + OSD Brush Flight Control Integrated Betaflight OSD *1 Radiolink R6DSM 2.4G 10 Channel Receiver options *1 Belting *1