Merriway BH02299 Compression Fitting Wall Plate Elbow, 15 mm - Brass

just the job, next day arrival.... jod done !!

Used to repair upgrade old garage tap. Mounted on small waste bit of wood the onto wall. Used lots of pvc tape in joints

Does the job

Very good quality

Fast delivery and just what we needed without having to purchase a complete tap kit thank u

Well made and finished

Exactly what I wanted. Delivery perfect

Argh. I bought this hoping that the description of the item and the image suggested that I could install an outside tap, wall mounted and everything would be as intended. The thread length of two! Different taps meant that the tap was at 90 degrees without the use of a washer to pad out the fitting. Now try to find a suitable washer with a 15mm+ internal hole when you’re in the field. Even when you pad out the thread with tape the fitting doesn’t tighten so really not fit for purpose. The solution was a copper washer between the tap and this fitting, allowing for some compression along with the necessary ptfe tape on the threads. If you’re running an outside tap, the best option is a through wall mount which can be fitted with the tap and then drill the mounting holes however the line up. Overall, it’s not the end of the world, but just be aware you’ll need some pots and pieces in your tool box to fit as intended.

Utilisé pour fixer au mur un robinet de jardin.parfait si on maitrise la technique de branchement d'un raccord à compression. Vérifier le diamètre du tuyau cuivre et bien le decaper avant la pose. Pas trop difficile.

Nickel

attention, il s'agit d'un raccord pour tube cuivre de 15mm, quant en France on a généralement des diamètres de 14 ou 16mm. Aussi, il n'est pas mentionné que le pas de vis femelle est de 1/2" (15/21).

Attention, ne convient pas aux tuyaux vendus en France de 14 mm (fuite). Ce support est prévu pour les tuyaux "européens" en diamètre 15 mm.