Unloader Adjustable Pull to Align For Honda GX340 11HP GX390 13HP 1" Shaft 4000 PSI For Devilblis EXHP3640 For Annovi Reverberi RKV4G36 Pressure Washer Pump Max. Flow 6.6 GPM

Fit pump perfect

Exelente

I did not like that I could not return this when it did not fit.

Works great as a replacement for my triplex pump , would recommend for Canpump Brand triplex pump as well , Thanks for prompt service.

Few points. No the hose connection is not hose thread, it's 3/4" IPS. Buy a adaptor or do what I did. Because my lower had a 1/4" fitting between the banjo bolt and the hose fitting with a line attached between it and the pump, and since when I telescoped the upper and lower apart enough to connect it exposed the O-ring very close to the top of it's bore I tried my old lower piece. A much more robust brass unit and taller where the O-ring mentioned above seated, it fit. Same size bore. The new banjo bolt worked fine also. Half the issues solved. Now the upper banjo wouldn't tighten enough to seal even after scraping rust out of the pump fitting and filing a 1/16th inch off the lead. So I took the seal washer from the old banjo bolt and it fit perfect around the shoulder of the new banjo bolt, now it tightened and plus had a double seal. The pressure washer works great now. Twice over the years I've bought parts to repair just the pressure relief valve at around $80 bucks each time. This new one works so good I ordered another one to have on hand. You can't beat the price if you can make it work. Hope this helps. Thanks