Tormek KS-123 Angle Adjuster for Knives

Great for small knives....easy to use for Tormak T*

If you own a Tormek....or even if you own a "lesser model look-alike", this is THE MUST HAVE jig....greater than all others which pre-date it. Specifically, if you use more than one stone....and, the wearing diameter of the various stones become different. Which, if it is a fragmenting material, i.e. the Tormek Original stone and the Japanese wetstone, this jig will allow you the flexibility to PRECISELY jump from one diameter stone to the other...as you go from a courser grit to a finer grit...and land on EXACTLY the same griding angle. Meaning, you will truly be working the apex edge to a finer and finer finish (on your burr removals), creating the most precise sharpening experience possible with your Tormek or other. Before this jig was invented, I had super trouble going from "stone to stone" and not maintaining that "exact, precise" grinding angle between the two....essentially, I was always sub-griding another micro-bevel angle, and results were not as I wanted. BUT NOW....with this simple little jig, that consistency from "stone to stone" at different diameters is GONE FOREVER. My results have been RAZOR, RAZOR sharp!!! Tomato skin stands NO chance with even the slightest pressure!!! This would also work if going from a 10" diameter diamond stone to an 8" honing strop wheel, or something similar. The jig "does all the math" for you! I cannot believe for all the years the Tormek system has been around, that this simple tool has not been created!!! Much, much more precision accomplished than with their "WM-200" template....which comes with the machine....NO COMPARISON in results! You will LOVE your process so much more with your machine and your knives! It truly makes amazing results simple to accomplish.

Works perfectly, takes the guesswork out of setting sharpening angle.

Easy to use. Works very well. If you have a Tormek probably want one of these for knives.

It's Tormek, so you know it will be high-quality and probably overpriced. Sorry, I'm grumpy because I just had to spend $130 for a couple feet of stainless rod and some booger-welds (Tormek calls it the "extended universal support"). But I digress... Overall I quite like it. If you change wheels at all, or have a multiple-Tormek setup, it's going to change your life. Just watch a video to figure out how to use it; it's not immediately obvious, but neither is it difficult. One thing that few of them seem to explain, for some reason: you want to hold the "prongs" on the wheel with one hand, while you turn the adjuster on the universal support with the other. The reason is that the mechanism tends to stick (on mine at least). If you don't hold the prongs down so that it's forced to "track" the support, you won't know where you are while adjusting. The only time it falters is with knives that are quite short (spine-to-edge) or quite tall. With "short" knives (ex: certain pocket and paring knives), the blade just doesn't reach the plastic piece in order to set protrusion, so you can't use it. The majority of small knives I've encountered do work, but some don't. If it's borderline, try clamping a little shallower. Really "tall" knives (cleavers, basically) just don't fit. I don't get enough of those that it represents a real problem, and I just fall back to the WM for those, but it's something to be aware of. Don't forget to take it off before you turn the machine on. I'm sure everyone does it at least once! I've done it a couple times; it's no worse for wear.

It’s taking me some time to get use to it but over all it helps find the right angle, I love it and recommend it

don't have a Tormek without it. A new way uf setting bevels that is light years ahead of the old one. easy to set knives to the exact bevel

Just like a Tormek jigs should work. Perfect.

su uso facilita mucho el afilado de los cuchillos, fácil de usar

Top

Very good it does exactly what they say it will do

KS-123 Knife Angle Adjuster – Perfect for Tormek Sharpening Systems The KS-123 Knife Angle Adjuster is an outstanding addition to any sharpening setup, and it pairs seamlessly with the Tormek range of sharpeners. If you’re serious about achieving precise and consistent results, this tool is a must-have. Ease of Use: Attaching the KS-123 to my Tormek sharpener was straightforward, and setting the desired angle is a breeze. It integrates perfectly with the Tormek system, making it easy to fine-tune the bevel angle for any knife. Whether you’re sharpening chef’s knives, pocket knives, or specialty blades, the adjuster takes the guesswork out of the process. Precision and Results: The KS-123 ensures absolute precision. With its ability to maintain a consistent angle throughout the sharpening process, my knives now have a razor-sharp edge that holds up over time. The Tormek system already delivers excellent results, but the KS-123 enhances the process by adding an extra layer of control and accuracy. Compatibility with Tormek: The adjuster feels like it was designed specifically for the Tormek range. It works flawlessly with the universal support bar, making angle adjustments quick and easy. I’ve used it on everything from a 15° edge for slicing to a 20° edge for durability, and the results have been consistently impressive. Build Quality: The KS-123 is made from high-quality materials that match the durability of the Tormek system. It’s sturdy, smooth in operation, and built to last. The adjuster locks securely into place, so there’s no risk of slippage during sharpening. Pros: Perfect compatibility with the Tormek sharpening system Easy to set and adjust precise angles Delivers consistent and professional-level results Solid build quality for long-term reliability Speeds up the sharpening process by eliminating guesswork Cons: Slightly on the pricey side, but the performance and compatibility with Tormek make it worth every penny. Conclusion: If you’re already using a Tormek sharpener, the KS-123 Knife Angle Adjuster is the perfect accessory to take your sharpening to the next level. Its precision, ease of use, and excellent build quality make it an invaluable tool for ensuring your knives stay sharper for longer. Highly recommended for professionals and hobbyists alike!

Excellent addition to the Tormek sharpener mounts. This allows different cutting edges for different kitchen knives (likely sporting knives too), with more acute long-lasting edges for standard knives and cleavers, and sharper shallower shorter lifespan edges for filleting knives.